Innolab India Saket, Delhi

The Wrap Reel is used for making leas for strength testing and count testing. The leas are either imperial leas having a swift perimeter of one and half yards with 80 turns or metric leas having swift perimeters of one meter with 100 turns. The yarn is spread uniformly in a band of 20mm as the leas are formed. Upto 5 - 10 leas can be formed at one time, if the arms of the reel can be docked to facilitate the removal of the leas from the reel. The number of turns is indicated on a counter. In case of motor operated Wrap Reel, a fractional horse power motor controlled by a pre-set counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of overtravel.

We are offering washing fastness tester. The washing fastness tester is used for determining colour fastness of textile materials to washings. This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap – soda solution. Before being rinsing and dried. The change in colour of specimen and stains of the adjacent fabrics are assessed with standard grey scale.

The Traverse Thread Counter consists of traveling microscope fitted on basic plate having a translucent plastic panel illuminated from below. The viewing arrangement consists of the microscope fitted on a traveling carriage which can be moved over two rods with the help of a screw. The microscope has a 10 x eye piece, and achromatic object glass. Focusing is done with the help of rack and pinion arrangement. The fabric to be tested is placed on the translucent panel, and a built in swivable gauge having openings of different lengths is lowered over it. The total number of threads in the fabric in any one opening is counted by manually operating a stroke counter fitted on the apparatus as the cross line graticule of the microscope travels over them.

we offer tensile strength and elongation are the two price characteristics of most of the raw materials. whether they are metals or non-metals such as rubber leather textiles plastic paper or finished products such as rods wires ropes, yarns, belts etceteras. these two properties often play a major role in determining the suitability of any raw materials for any specified application. it is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

The 'Innolab' Shade Card Winding Machine consists of a set of grips between which the card is held with the help of knurling bolts. There is an arrangement to rotate both grips at a time. Yarn is wind over the Shade Card at equal spacing under a desired tension. The yarns are guided on the shade card with the help of yarn guides, which are moves parallel to the shade card with the help of the wormworm wheel and camfollower mechanism. The guide is positively linked to the rotation of the shade card with the help of the wormworm wheel, shaft and camfollower mechanism. There are a set of spring loaded adjustable tensioning arrangement provide the desired tension to the yarn. For holding the reels, there is a stand on which the holding pins and guides for yarn etc. are mounted for easy movement of the yarns. The equipment is built on the fabricated base. It is finished in metallic or deco painting and bright chrome zinc plating to give it a corrosion resistant finish.

We offer a specialized instrument to determine the gsm of the textiles (woven, non woven or knitted, fabrics) our round cutter can be used for virtually any type of material including film, foam, carpet paper and board.

We are offering muffle furnace. He furnace has ro-bust construction with muffle of high grade refractory wound kanthal heating elements, sealed with embedding cement. Temperature is controlled by sunvic energy regulator fitted in the base front of the furnace. With automatic door switch heating is cut off with counter balance handle. Front panel has two indicator lights. Designed to operate on 220 volts, single phase 50 cycle a.c. 100mm. Pyrometer indicator & thermocouple with necessary lead wire is provided for indicating the temperature. The casing is made of thick mild steel sheet reinforced with angleiron. Maximum temperature 900oc excess temp cut off fuse is provided in the furance.

We are offering motorized wrap reel. The wrap reel is used for making leas for strength testing and count testing. The leas are either imperial leas having a swift perimeter of one and half yards with 80 turns or metric leas having swift perimeters of one meter with 100 turns.

INNOLIGHT MBTL LIGHT FASTNESS TESTER is used for determination of Colour Fastness to light using a 500 W mercury Ballast Tungsten Filament Lamp & internally phosphor coated. The equipment is suitable for all types of textiles except photocrometic coloured textiles. The unit consists of a hollow cylinder of metal open at both ends with an internal dia of -18" & length of 18" A 500 W MBTL fading Lamp is mounted centrally so that the light distribution is constant around the circumference. An hour meter with buzzer and an hour totaliser are mounted on the base. Four specimen holders are installed at equidistance in inner circumference of cylinder alongwith metal sheet mask to cover half of each test specimen & the standards. As temperature may touch upto 800 C constant cooling arrangement with water flow is provided. A horizontal pump and water tank are included in scope of supply.

The Lea strength of yarn is one of the major properties on which the suitability of yarn for its ultimate end use depends. The test for determination of Lea strength consists of making a lea from the yarn with the help of a wrap reel and testing it on the lea strength tester which registers the maximum load at which the lea starts unraveling.

We are offering infralab hthp beaker dyeing machine on infrared heating system is the latest product from innolab stable. Keeping to its tradition of innovating new products, infralab is a state-of-the art laboratory equipment for sample dyeing of fibre, yarn and fabric (lab dip) with accurate results.

INNOLAB Scale has two Horizontal Scales (white & black) and one Vertical Scale (black). White Scale is marked 0-100 with least count 100 GSM & black Scale (Horizontal) is marked 0-100 with least count 1 GSM. Vertical Black Scale is marked 0 + 5. The balance is equipped with a Pan on left hand side & a spirit level with 3 Nos. leveling screws, below the main frame of Scale. Two small screws are provided on LH side so that pointer can be gets zero on O (on Vertical Scale). Two riders (Weights - heavier for white & lighter for black Scale) are provided for calculation of GSM.

A specialized instrument to determine the GSM of the textiles (Woven, Non Woven or Knitted, Fabrics) Our Round Cutter can be used for virtually any type of material including Film, Foam, Carpet Paper and Board.The Cutter has been specially designed to make it portable due to its light weight. Only the fabric has to gripped between cutter base and Rubber pad cutter top to be rotated gently clockwise direction for accurate cutting of fabric. The cut fabric can be weighed and multiplied by 100 to get GSM.

Open the door of the exposure chamber. Raise the hinge dacrylic sheet. Place the ammonia paper, coated face up, Over the resilient foam sheet, Lower the acrylic sheet so that its firmly over the paper. Ensure that the paper. Ensure that the paper lies flat and is free of any fold or crease.Place the test specimen holder over the specimen support such that the pin on the specimen supports site inside the hole in the screw of the specimen holder.

One of the test for determination of colour fastness of dyed or printed textiles or leather is the crocking test. This test is used for the determination of colour fastness against rubbing, either under dry or under wet conditions. In this test and moving brass finger of specified shape and size rubs against the test specimens under test and the amount of colour transferred to a piece of abradant fabric fixed over the base of the moving finger are graded with the help of standard grey scales to evaluate the colour fastness against rubbing.

we offer Crockmeter. One of the test for determination of colour fastness of dyed or printed textiles or leather is the crocking test. This test is used for the determination of colour fastness against rubbing, either under dry or under wet conditions. In this test and moving brass finger of specified shape and size rubs against the test specimens under test and the amount of colour transferred to a piece of abradant fabric fixed over the base of the moving finger are graded with the help of standard grey scales to evaluate the colour fastness against rubbing.

Innolux colour matching cabinet will show your true colour. We guarantee that it offers a standardised viewing environment for visual colour evaluation leading to faster and accurate colour decisions at your end.

‘Innolab’ Button Snap Pull Tester’ is an user friendly equipment to test ‘SNAP STRENGTH’ of buttonsrivetsjoints to ensure that it meets design tolerance and safety levels, particularly in baby clothing. Vertical stand to hold the gauge with arrangement to change the position of gauge.

Clamp the yarn in the clamp fixed on the motor shaft. A guide is provided on the clamp for easy clamping. Pull the other end of yarn through the clamp on the moving crosshead had while clamping ensure that yarn is clamped for proper test length and yarn is free and under correct tension of weight. This is necessary to have uniform length of yarn between the clams under fixed tension to get proper repeatability of the results. Select SZ switch in S or Z position depending upon type of yarn. Put the main switch ON and press the ‘RESET’ push button to ensure zero reading on the digital display unit. Select the motor speed to high speed position. Select ‘NORMAL’ position for initial operation. Start the motor using ‘START STOP’ switch. The motor will now start untwisting the yarn and DIGITAL DISPLAY will start counting. After reaching approx. 90% of expected TPM reading, it is recommended to lower the motor speed to minimum possible to get better results. By using ‘ADJ knob’ the motor can be run in very slow to moderate slow speed, or if motor stops completely test can be run manually by pushing motor shaft by hand.The instrument carries a guarantee for 12 month for free repairs against any manufacturing defects. However this guarantee is void in case of any physical damage or attempted repairs at customer’s end. The instrument is required to be sent to our works at customer’s expenses for claiming warranty services.

The Air Permeability tester for textile consists of an arrangement for holding the test specimen between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed of the test specimens, arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the two faces of the test specimen, The vacuum needed to draw the air through the test specimen is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the manometer tube terms of mm of water level & airflow is measured by the rotameters supplied with the instrument.