Instrumentation Equipment Dealers in Gt Road, Delhi

• Accuracy: +/- 2.5 degree C or +/- 0.75%)
• Application: Industrial
• Temperature Range: 0 to 1250 Degree C
• Probe Material: Inconel
• Assembly: Thermocouple Probe
• Mount Type: Threaded
• Probe Termination: Lead Wire
• Probe Diameter: 0.5- 8 mm
• Probe Length: 0- 150 mm
• Junction Type: Ungrounded
• Material Grade: INCONEL 600
• Insulation: Mineral insulated

• Electric Grade: ETP Grade
• Usage/Application: Power Distribution
• Color: Silver
• Material: Copper
• Application: Automotive Industries, Power Distribution, Telecommunication
• Surface Treatment: Tin Plated

We are offering Astero Logic Controller for our valuable clients. Our range of Aestro Logic Controller are made of superior grade raw materials, which ensures the durability and efficient performance of our range. Features:   Astero microprocessor based panels are ideally suited for small and medium sized RO plants Complete operating logic of the process is pre programmed Inputs from LPS, HPS and Level Switch (LS) Four outputs in the correct operating sequence namely Raw water pump (RWP), High pressure pump (HPP) Flushing solenoid valve (RL2) and Transfer Pump (TP), Cleaning Pump (CP)/Doser The electronics take care of required motor protection such as overload, dry running, single phasing and high conductivity Debounce time (In built debounce time to avoid chattering of high pressure pump contactor due to initial dipping in suction pressure) Time based flushing New improved RO control panels with additional features such in built conductivity, one auxiliary input (can be configured as RWLVL, RL2, ORP, Dosing, TP I/P) & more   Other Applications: Auto multiport Valve Hydropneumatic Ultra Filtration

• Type: Arduino Shield
• Application: Electrical Use
• Condition: New
• Color: BLUE

Description It has 2 connections for 5v hobby servos connected to the Arduino's high-resolution dedicated timer. Its 4 h-bridges and l293d chipset provide 0. 6a per bridge. It comes with thermal shutdown protection and internal kickback protection diodes. It can run motors on 4. 5vdc to 25vdc. It provides up to 4 bi-directional dc motors with individual 8-bit speed selection with single coil, double coil, or interleaved stepping. The pull-down resistors keep motors disabled during power-up. It has big terminal block connectors to easily hook up wires and the power Arduino reset button brought up the top 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies. This is tested and compatible with Arduino mega 1280 and 2560, dissimilar, duemilanove, and uno. 2 connections for 5v 'hobby' servos connected to the Arduino's high-resolution dedicated timer 4 h-bridges: L293d chipset provides 0.6a per bridge with thermal shutdown protection Up to 2 stepper motors with single coil, double coil or interleaved stepping Has internal kickback protection diodes weight: 0.2 gms DIRECT MESSAGE FOR PRICE   We ship worldwide🌎   #electronics#smps#industrialpowersupply#powersupply#3Dprintingpwersupply#technolongy#senciores#electrical#dcmoter#led#electronicengineering#robotics#robot#stemeducation#cricuitvoard#diyprojects#arduino#programming#coding#hardware#software#dcfan#microprocessor#microcontroler#usb#submersible pump #automaticsanitizermachine #robotics

Position Transmitter: Cylinders : Miniature series (12 mm dia to 25 mm dia ) Cylinders : Standard series ( 32 mm dia to 160 mm dia) Cylinders : Heavy duty series ( 200 mm dia to 1100 mm dia ). Stokes upto 2000 mm available . Spool valves : 2 – way, 3 – way, 5 – way, Hand leaver, Push Button.

Industrial and commercial installations in our country have large electrical loads which are severely inductive in nature, such as motors, large machines, air conditioners, drivers etc. which causes a severely lagging power factor. This lagging power factor results in loss and wastage of energy and thus heavy penalties by electricity boards. In case of fixed loads this can be taken care by manual switching of capacitors. However in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor and hence manually switching on/off the capacitors in proportion to variation of load within an installation is next to impossible. This drawback can be overcome by using an APFC panel (Automatic Power Factor Correction Panel) which not only maintains a high power factor but also eliminates the need for constant manual intervention. The ratio of Active Power to Apparent Power is called Power Factor which is equal to Active Power/ Apparent Power Prevents leading power factor in the installation during low load conditions Improves efficiency of the system by reducing losses Reduces the KVA demand charges Ability to maintain a constant high power factor Economical with faster payback periods Eliminates low power factor penalties levied by EB  

For Enclosures, specially unmanned, the following parameters need to be monitored to ensure safety of the equipment in the enclosure. Our system monitors and intimates on the NMS: if there is smoke inside the shelter if the temperature inside the shelter goes beyond a limit (indicating Power/AC failure or even a Fire) if someone has opened the door of the shelter and is not authorized to do so These conditions, if unchecked can compromise the security of lacs worth of equipment in the shelter and more importantly will lead to break in service and hence dissatisfied customers. Keeping the above in mind, we have developed a comprehensive solution that incorporates all the features in a single box that operates on 48V DC.   Our Fire Panel (Advanced Model) has following features: Central Control Panel Intrusion detection Smoke detection Temperature rise detection Whenever a zone is activated through its sensor, the following outputs are there Corresponding zone LED lights up on Central Panel Relevant message appears on LCD Display In-built Buzzer sounds NMS compatible NO/NC output is also activated In case of Fire additionally a hooter also sounds. This hooter can be mounted outside the shelter Rugged industrial design, suitable for rough usage Temperature Alarm/Sensor features: Continuous monitoring of temperature using an external temperature sensor If the temperature in BTS shelter goes beyond the User defined temperature cut-off then the Temperature LED lights up on the central panel and Buzzer starts sounding. Also, the NMS is activated. Once the temperature goes back to normal, the LED, Buzzer and NMS are reset automatically. The display will indicate 'System Normal' The cut-off temperature can be modified by jumper setting Fire Detection: Fire detection is done using a standard Smoke Sensor that is interfaced with the Central Panel. The Smoke Sensor comes with blinking LED to indicate the status of the sensor The Smoke sensor draws it's power from central panel In case of fire, the Fire LED lights up on the central panel and buzzer sounds. Also, the NMS is activated. In case of Fire, additionally, a hooter also sounds. This hooter can be mounted outside the shelter In case the wiring of Smoke sensor is Open or Short then corresponding LED lights up and buzzer sounds. The LCD display also displays the OPEN/SHORT message. RESET button is provided for resetting Fire indication. Intrusion Detection with Entry/Exit Delay: Intrusion is detected using a magnetic switch that has to be mounted on the door of the enclosure. There is provision for Entry and Exit delay so that user can deactivate the alarm before the NMS starts When the door is opened, the Door LED lights up on the central panel and Buzzer starts sounding. Also, the NMS is activated. The user has to enter the 4 digit Password to deactivate the buzzer and NMS. While leaving the enclosure, the user has to again enter the 4 digit Password to activate the Intrusion detection function The exit time is as determined by the jumper setting Entry Code: Four digit Code has to be entered on the keypad provided to detect authorized entry. This is factory preset to 1234. User can change the password of each panel by going into programming mode without the need to open the panel. Specifications: Following are the specifications of this Fire Alarm Panel:- Fire Zone : One Fire Sensor : Optical Type Sensor, 1 No. (Provision for second Sensor too) Door Sensor : Magnetic Door Sensor, 1 No. Temperature Sensor : RTD or Thermistor Sensor, 1 No. Entry delay, suitable using jumpers but displayed on LCD Exit delay, set table using jumpers but displayed on LCD Hooter max time limit Controls: LCD display to display various error message Separate switch to indicate selected settings Jumper based settings Front panel control: Reset switch for fire alarm

• No. of Doors: Double Door
• Automation Grade: Semi-Automatic
• IP Rating: IP55
• Material: Mild Steel
• Phase: 3 Phase
• Frequency: 50 Hz
• Rated Voltage: 415 V
• MCB Count: SPN
• Number Of Ways: 6 Way
• Type of Control Panel: Electric Control Panel
• Power Source: Electrical
• Current: 800A

Our range of various types Wire Rope (SC-3883) is widely used in Commercial Vehicals, Three Wheeler, Motor Cycle etc. We manufacture these cable according to the designs, drawings and specifications provided by the customer

Vehicle : Scorpio 

Clutch cable is is widely used. We manufacture these cable according to the designs, drawings and specifications provided by the customer.

• Application: Clinical, Hospital
• Color Code: AHA
• Patient End Terminal: 5-ld, clip
• Cable Material: TPU
• Cable Length: 3 Feet

• Specifications: Detection Method
• Passive Infrared: Detection Area
• 40ft X 50ft (12Meters X 15Meters) 120º C: Coverage Multi – Level Area
• 40 Zones: Pet Alley Area
• 18 Zones: Mounting Height Multi – Level Area
• 8.3ft (2.5Meters) max: Pet Alley Area
• 4-5ft (1.2-1.5Meters): Detection Speed
• 1-3.3ft/sec. (0.3-1.0m/sec.): Sensitivity Adjustment
• Selectable 3position ( H,M,L ): LED Indicator
• LED light during detection: Alarm Period
• 2 ± 1 sec. (Delay Timer): Alarm Output
• NC. NO.28V DC 0.2A max: Tamper Switch
• Opens when cover removed.: Pulse Count
• 2 ( 20 ± 5 sec. ) or Test ( 1 pulse): Day/ Night Mode adjustment
• Approx. 10 to 100,000 lux: Warm up period
• Approx. 60 sec: Power input
• 10.8- 13.2 VDC: Current draw
• 25 mA max: Mounting
• Wall ( Indoor/ Outdoor): Operating temperature
• -4 ° F-+ 122 ° F ( -20 °C-+50°C): Weight

• Features: High output to weight ratio, Junction box, Synchronizing trolley.
• Height: 2230 or 2300 Mm
• Width: 600, 750, 900 or 1000 Mm
• Depth: 600 or 800 Mm

We provides varies kinds of electric solar panels in different kinds of brands and wattage.

Digital Point Solutions specializes in Integration and Automation of AV and conferencing products for Boardrooms and Conference rooms. Av integration involves setting up an AV & Conferencing Infrastructure in such a way that a Boardroom gets fully equipped to meet current and future AV-conferencing requirements. Boardroom Automation systems provides the Presenter with a Simple & User-friendly interface for controlling Audio Visual and Conferencing Equipment, Lighting, Aircon and Drapes in a Boardroom or Conference room.

We are offering advanced fire alarm panel. Advanced fire panel - our advance fire alarm sensors helps to detect the smoke in an easier way with lcd display. Get the latest fire alarm sensors and get fire protection with our with our advance fire alarm monitoring systems. Spaceage security offers best commercial fire alarm system with various other fire sensor services.

• Operating Voltage: 24 V
• Warranty: 10 - 25 Years**
• Type of Solar Panel: Poly Crystalline
• Maximum Power: 5 to 350 W
• Open Circuit Voltage: 11 - 21 V
• Short Circuit Current: 0.70 A
• Maximum Power Voltage: 8.3 - 17.6 V
• Maximum Power Current: 0.40 A

Amc automation and robotics provides its customers - leading players in their respective industries from material handling, warehouses, fulfilment centres to ceramics, glass, agri and tobacco & automotive , with innovative customised automation solutions across different process applications. these complete turnkey systems are developed by our in house design and engineering team from concept to production to after-sales support including mechanical and electrical design, plc, and robot programming and risk assessment. Turnkey solutions include : robotic cells automation systems warehouse automation material handling and end of line assembly machine vision scanning systems other applications to name a few

seeco industries is an iso 9001:2000 accredited concern. Manufacturer & exporter of automotive rubber components from 1960 under leadership of s.prithi singh saini (ms saini rubber industries) supplyling to indian navy, defence, o.em and replacement market developed new company called seeco industries, started in 1997, is engaged in the production of automotive rubber components.

Silco are engaged in exporting the best quality of Customized Control Cables. These control cables includes clutch wires, accelerator wires, brake wires, speedometer cables etc. The Control Cables, which we manufacture are made from branded raw materials available in the market. Our Control Cables fits to all types of vehicles in the international market. It is long-lasting.

Silco Cables is one of the leading Clutch Cable Manufacturers & Exporters in India.

vehicles control cables, vehicles speedo cables

touch screen control panel, Temperature Controller

Solar Water Heater, solar warning light, Solar Torches, Solar Torch

Automotive Control Cable, Dashboard Instrument, speedometer cable

Clutch Cables, speedometer cable, gear cable, front brake cable

SOLAR PANELS, Ladies Winter Wear, Flour, ladies summer wear

PLC Controller, Electronic Liquid Level Controllers, digital controllers

Aluminium Wire, brass strip, finished goods, Wire