Digital Insulation Tester Dealers in Delhi

• Application: Industrial
• Country of Origin: Made in India
• Model Name/Number: Rishabh AIT-501
• Test Current: 500V,1000V,2500V,5000V
• Auto Power Off: YES
• Brand: Rishabh
• Storage Temp Range: -20 to 60 Degree C
• Weight: Approx. 2kg
• Dimension: 202 x 155 x 94 mm
• Short Circuit Current: 1.8 mA
• Brand: Rishabh
• Low Resistance: 0.1Ohm to 999.9Ohm
• Test Voltage Accuracy: 0% to 20%

• I/p Voltage: 220/230V or 380/400V, 50/60HZ AC supply
• O/p Voltage: Up 60KV and 100mA
• Capacity: Up to 6KVA
• Timer: 0-9999 Sec./min. Digital

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.   Features Technologically advanced design that helped make proper use of space and minimize the size of the equipment. The equipment has been made so that it is very simple to operate, thus any person after learning once can operate it   Standard Accessories Main Unit

• Scale Length: 100 mm (approx.)
• Mains Supply: 230V, 50Hz
• Accuracy: As per IS: 29992-1987
• Dimensions (in inch): 14x 10x 10 (approx.) including to cover
• Weight: 9 kg (approx.)

• Brand Name: Fluke
• Model: Fluke-1507
• Usage: Industrial
• AC/DC voltage: 0.1 V to 600 V
• Continuity: 200 mA
• Resistance: 0.01 to 20.00 k
• Features: Save battery power with auto power off,  Read measurements easily with large, backlit display,  CAT IV 600 V over voltage category rating for added user protection

• Angle of Oscillation of Grips: 22.2o ± 0.5 Degree
• Flexing Frequency: 110 ± 5 cycles/minute
• Dimensions of Test Specimens: 70 x 45 mm
• No. of Specimen Test at a Time: 4 or 12

• Model: ALABS-A75-016
• Categories: Lab Measuring Instruments
• Automation: Fully Automatic
• Test voltage: 60, 80, 100 kV
• LCD displays: Test status, HV rise, HV fall, BDV of previous test
• Weight: 36 kg

• Color: Yellow
• Packaging Type: Box
• Application: Industrial
• Type Of Testing Machines: Powder Dynamometer
• Test Voltage: 500V, 1000V
• Range: .5KV-1KV-2.5kV - 20G. OHMS
• Features: Low battery consumption,Low battery indicator,Overload protection,Auto-off.

• Application: Industrial
• Country of Origin: Made in India
• Features: Low resistance buzzer , Data hold, auto range, Low battery warning,Complete with test leads,heavy duty carry case and six 1.5V AA batteries.
• Model: DIT-2500
• Voltage: AC V 700V ±(2%+5) AC V
• Auto Range: Yes
• Function Symbol Display: Yes
• Data Hold: Yes
• Low Resistance Buzzer: Yes
• Low Battery Warning: Yes
• Brand: Mextech
• Display: Digital
• Measuring Frequency: 60Hz
• Weight: 500 g

• Brand Name: Sanwa Japan
• Analog Insulation Tester: DM1009S
• Product Code: DM1009S
• Waranty: 12 Months
• Availability: Out Of stock

Insulation Tester (Meggers) Transistorised     These have been designed with a view of stronger and rugged construction of individual components, which have been tested by us for last so many years, and thus ensuring longer life of the instrument. The size and weight of this model has been considerably reduced with a view of making the instrument more handy. The indicating Instrument is specially protected seperately in a moulded case to prevent damages from dust at the time of servicing. The indicating instrument has knife edge pointer and Anti-parallax mirror scale for ensuring accurate readings. Single person operation push button control, no troublesome cranks to turn, usage of standard 1.5 volts pencil cells are all the special features.ACCURACY : (+/-)5% of indicated value. WORKING PRINCIPLE : A push pull oscillator is used to convert DC voltage to AC, which is stepped up and further rectified to give the test voltage which is DC. A sensitive movement is used to detect the change in current due to insertion of resistance in the circuit. Available in various ranges from 10 to 500 Mega Ohms.

• Color: Black
• Application: Industrial
• Range: 1000 VOLT DC
• Material: ABS
• Test Voltage: 1000 VOLT DC
• Model Name/Number: RISH INSU-10
• Display Type: Digital

This is a compact, portable self-contained Instrument which is used for direct reading of insulation resistance of electrical installations and apparatus. The Insulation tester is composed of a hand driven A.C. generator and a high sensitivity cross-coil Indicator. The indicating movement is of the cross coil ratio type and is designed so that voltage fluctuation, caused by irregular cranking have no influence on the results of measurement. The AC Magnet hand generator drive is extremely smooth and silent. There are no carbon brushes and commutators, to be replaced as in DC generators. The quick response saves the time and extend the life of the generator. Available in various ranges from 10 to 500 Mega Ohms.

Features include: • test voltages to up 10 kv provides solutions for all applications • cat iii 1000 v, cat iv 600 v safety rating • warning function alerts the user that line voltage is present and gives the voltage reading up to 600 v ac or dc for increased user safety • selectable test voltages in 50 v steps from 250 v to 1000 v, and 100 v steps above 1000 v • measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall • long battery life gives the user over 750 tests between charges • automatic calculation of dielectric absorption (dar) and polarization index (pi) with no additional setup • guard system eliminates the effect of surface leakage current on high-resistance measurements • large digitalanalog lcd for easy viewing • capacitance and leakage current measurement • ramp function for breakdown testing • resistance measurements up to 2tω • timer settings up to 99 minutes for timed tests • 3-year warranty.

• Application: Industrial
• Warranty: 1 year
• Brand Name: Hioki
• Range: 50V-5000V
• Accuracy: Precise Accuracy
• Battery Backup: 2 days
• Auto Power Off: Yes
• Display Type: Digital

• Type: Insulation Resistance Tester
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Application: Control Panels, Industrial Use, Power Grade Use
• Frequency: 45Hz, 66Hz
• Power Source: Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year
• Operating Current: Double Phase, Single Phase, Triple Phase
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature

• Type: Fluke Multimeter
• Certification: ISI Certified
• Condition: New

Description Description: The Fluke 1503 insulation tester is exquisite, compact, durable and easy to operate. The insulation multimeter Fluke 1503 have become numerous overhauls because they can accept various test voltages. Ideal for debugging and preventive maintenance situations. Features: * 0.1 MΩ to 2000 GΩ insulation test * Insulation test voltage: 500 V and 1000 V, for a variety of applications * The remote test probe makes it easy to perform repeated tests and perform tests in inaccessible locations * Live circuit detection, if the detected voltage is greater than 30 V, the test ban to improve the protection of personnel * Capacitive voltage automatic discharge function and improve the protection of personnel * AC / DC voltage: 0.1 V to 600 V * 200 mA Continuity measurement * Resistance: 0.01 Ω to 20.00 KΩ * Auto off function to save battery power * CAT IV 600 V measurement level of security, improved protection of personnel * Included Accessories: Remote probe, test leads and probes, alligator clips * Install the optional Fluke TPAK magnetic suspension system so you can free up your hands for other work * 4 AA alkaline batteries (NEDA 15 A or IEC LR6), at least 1000 insulation tests can be (not include)

• Operating Temperature: 0 Deg to 50 Deg C
• Model Number: MC-900
• Storage Temperature: -10 Deg C to 60 Deg C
• Relative Humidity: 80% Maximum
• Dimensions: 144.5 x 95 x 72.5 mm (approx.)

• Type: Insulation Tester
• Brand Name: Bosch, Dewalt, Taparia
• Certification: ISO 9001:2008 Certified
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Application: Control Panels, Industrial Use, Power Grade Use
• Frequency: 45Hz, 66Hz
• Power Source: Battery
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year
• Operating Current: Double Phase, Single Phase, Triple Phase
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature
• Puncture Voltage : 220V, 440V, 580V