Insulation Material Dealers in Chawri Bazar, Delhi

• thickness (mm): 1.5 - 25.0

Is made from a blend of high quality Chrysotile Asbestos Fibre and other non-combustible Ingredients, Is available in a wide range of thicknesses to cater to all needs, Gives clean edges while cutting gaskets, In steam and hot air pipelines and ductings.

Extruded polystyrene XPS is the ideal product for the insulation of roofs. In the case of inverted flat roofs the recommended product is XPS SL which is placed on top of the waterproof layer. Apart from being and energy efficient application, the XPS helps to protect the waterproofing membrane from damage and UV degradation. XPS SL has got closed cell structure with a lap joint rebate to facilitate its placement on the roof.  Application   XPS SL is applied on: • Inverted roofs, pitched roofs, and for restoration of these roofs • Perimeter insulation for walls • Load-bearing foundation slabs • Forged steel, slabs and pavement • Roads and railway lines

• Type: Fuser Film Sleeves
• Material: Teflon
• Usage/Application: Laser Printer
• Packaging Type: Corrugated Box
• Brand Name: IQ
• Thickness: 0.1 to 1 mm

pvc cable markers, Thermocouple, Rota Meter, Pressure Gauge

• Condition: New
• Automation Grade: Automatic
• Application: Electrical
• Feature: Easy To Install
• Country of Origin: India

33kv isolator 1250 amp and available as per requirement with earth and without earth motorised and non motorised

We bring along a huge selection of precisely engineered Lightly Resin Bonded Mattress that offer maximum resistance to passage of heat. These mattresses are spun from fibres selected rocks melted at a high temperature and bonded with thermo setting resin. We specialize in stitching, slitting and chopping them to specified dimensions.Moreover, these economical and light in weight mattresses are extremely ideal for hot face temperature and provide personnel protection, prevent condensation and reduce noise level. Our Rock wool mattresses are used for thermal insulation of pipes storage tanks, equipments, boilers, kilns and fire insulation of fire doors, electrostatic precipitators, flues and ventilation ducts, ovens, furnaces. Standard Dimension/ Density: Max. Service Temp: 750* C Thickness: 25 mm to 150mm Standard Packing: HDPE Covers Density Kg/ m3: 85 to 150 or above Specification as per: IS 8183, ASTM C592 Standard Dimension: 1.64mtr x 1.22mtr , 1.52mtr x 1.22mtr Hexagonal GI wire netting Lamination: 3/4 inch x 25swg

• Type: Asbestos
• Material: Cement
• Color: Grey
• Pattern: Plain
• Material: Cement
• Use: Industrial

In electrical engineering, Earth Potential Rise (EPR), also known as Ground Potential Rise (GPR) refers to the phenomenon of large current flow to the earth through earth grid impedance. The potential relative to a distant point on earth declines with distance from the source and is the highest at the point where the current enters the ground. GPR is a cause of major concern in designing of electrical substations because a high potential may be quite hazardous for the workmen and the equipment. The potential gradient (drop of voltage with distance) may be high enough that it may develop even between the workman’s two legs, or between the ground on which he is standing and a nearby metal object. Any conducting object which is connected with the earth or ground of the substation such as telephone wires, metal piping or fences may be energized even at the ground potential of the substation. This transferred potential is a great hazard to the people and equipment within and outside of the substation.   An antistatic floor mat or a ground mat is antistatic device which is designed to eliminate static electricity. It does so by collecting the static electricity through the conducting material embedded in it. However, the mat must be grounded (earthed) to do its job. This is done by plugging it into the grounded line with an electrical outlet. Static electricity needs to be discharged at a slow rate; therefore a resistor should be used in the grounding arrangement of the mat. However, some mats are available these days that allow you to connect an antistatic wrist strap on them. Rubber mats are used as floor covering around electrical panels to safeguard the life and limb of the staff due to short circuits or the possible leakage of the current. Rubber mats are commonly used in substations, power generation plants, workshops etc. Voltage Test: The rubber mats are tested to pass the voltage test at 15000 V for one minute, without showing any warming effect or getting punctured. Breakdown Strength:  The rubber mat should not fail at less than 40000 volts or should have breakdown strength as per the procedure outlined in IS: 2584/83.

• Type: Heat Shrink Sleeve
• Material: Polyolefin
• Shape: Round
• Thickness: 0-5mm, 5-10mm
• Color: Blue, Green, Transparent, White, Red
• Country of Origin: India
• Brand Name: Woer

we offer heat shrinkable tubing meeting commercial and military requirements in a wide range of application-oriented materials. the use of polyolefin heat shrinkable tubing provides an effective means of applying a skin-tight, protective covering for a wide variety of electronic, electrical, electro-mechanical and mechanical applications. the use of polyolefin heat shrinkable can result in important benefits in cost, weight and size reduction and improved performance, reliability and apperance. ain heat shrinkables lend themselves easily to automation, with resulting labor-cost savins. moderate heat is applied to the polyolefin heat shrinkable tubing which then molds itself to conform to regular or irregularly shaped objects.

Acclaimed for its sturdy construction, excellent quality and shock resistance, our Face Shield is highly demanded in the market. We are one of the leading Manufacturers, Exporters and Suppliers of Face Shield. Our Heat Resistant Face Shield is manufactured and tested using highly advanced techniques by following the directions given by experts. It can be obtained from us at an economical price. Place retail as well as bulk orders for the face shield with us!

We are known as the trustworthy and reliable manufactures of Asbestos Millboard Discs. Our best quality asbestos millboard discs has made us extremely popular all around. The endowment of our asbestos millboard discs have made us best among our competitors.

• Type: Heat Shrinkable
• Material: PVC
• Thickness: 1 mm
• Application: Electrical Winding
• Color: Available in many colors
• Length: 25 Meter

• Shape: Conical
• Thickness: 1-100mm
• Application: Construction
• Color: Red
• Feature: Corrosion Proof, Excellent Quality, High Quality
• Width: 1-50mm
• Dimension: 1-500mm

Memory foam mattress +sping mattress

• Dry: Min. 18 kVrms, Max. As per Requirement
• Wet: Min. 8 kVrms, Max. As per Requirement
• Creepage Distance: As per Requirement
• Cantilever Load: Min. 45kN, Max. 110kN

Ht sleeve