Intercooler Hoses Dealers in Keshav Puram, Delhi

Features :PTFE Extruded Rods & Tubes are manufactured by presintered resin.According to different demands, the tubing can be opaque or translucent. PTFE is the most chemical-resistant of all known Plastics. It has the best electrical properties of plastics.

• Reinforcement: Brass coated high tensile steel wire
•  :  
•  :  
• Lining: Oil resistant Synthetic rubber
• Cover: Natural rubber with excellent ageing & abrasion resistance
• Temp.Range: -40°C to + 80°C

Application   Suitable for use in open cast mines & quarries for use in pneumatic air application.

• Power: 25 kW
• Phase: 3 Phase
• Material: Stainless Steel
• Motor Power: 320 V
• Automation Grade: Automatic
• Loading Type: Front Loading
• Drum Capacity: 700 L
• Application: Rubber Part Cleaning
• Power Source: Electric

• Country of Origin: Made in India
• Color: Multi-color
• Material: silicon
• Size: 60 inch to 75 inch
• Brand: KrmaX

manufacturing rubber tubing for the mouthpiece with competitive prices..

• Country of Origin: India
• Size: 15-30mm
• Material: Plastic
• Diameter: 0-10mm
• Shape: Round
• Color: White
• Feature: Perfect Shape, High Strength, Fine Finishing, Excellent Quality, Corrosion Proof

• Type: Spiral Paper Tubes
• Material: Crepe Paper
• Diameter: 0-50mm, 50-100mm
• Shape: Round
• Color: Brown, Green, Light Brown, White
• Finishing: Laminated, Non Laminated
• Feature: Compact Design, Easy To Fill, Eco Friendly, Flexible, Hard Texture, Light Weight, Perfect Finish
• Filling capacity: 100-150mtr, 150-200mtr, 200-250mtr, 50-100mtr
• Height: 3-5inch, 5-7inch, 7-10inch
• Feature: Smooth and clean surface
• Application: Filling Thread
• Pattern: Printed
• Thickness: 3 - 12 mm

• Size Ranges: O.D 63.5 mm(Min) to 219.1 mm (Max)

VPL brand ERW Black Pipes – Electric Resistance Welded (ERW) pipes and tubes are used in various engineering purposes, fencing, scaffolding, line pipes etc. These tubes & pipes are available in varying qualities, wall thickness, diameters and finishes depending on the requirement of the end-users customers. In manufacturing these ERW pipes & tubes, we utilize superior quality, fully skilled, control-rolled, low carbon steel. High strength corrosion resistance, high malleability, superior strength, sturdy & durability are the special features of high performance ERW steel pipes & tubes that are manufactured by us. Ensuring about the quality of these products, we manufacture them as per the international standards. Being a quality conscious manufacturer & exporter, our ERW steel pipes and tubes are processed through numerous tests including a hydro-test, an ultrasonic weld inspection, bevel check, micrometer check, straightness evaluation, and ring gauge to ensure it’s quality.

• Country of Origin: India
• Certification: ISO Certified
• Application: O2, N2, CO2, Ar, AR+CO2, H2, DA, N2O etc
• Feature: Easy To Fit
• Pressure: High
• Warranty: 3 Years
• Inlet and Outlet Connection: As per Requirement
• Hydraulic Test Pressure: 300 Bar

SS -304 Double Wire Braided SS 316 Corrugated Flexible Hose with SS Spring having SS 304 Nut / Nipple on both sides. These are ideal for connecting Gas Manifold System with Gas Cylinders.   Key Features:   # High physical strength combined with light weight. # Overcomes all the limitations of Copper Tailpipes and Teflon Hoses. # Good corrosion resistance. # Resistance to fire, moisture, abrasion and penetration. # Compensates for intermittent or constant movement # A flexible and quick alternative for rigid piping in difficult location. # Compensates for thermal expansion or contraction of piping. # Available in sizes: 1000 mm, 2000 mm, 3000 mm, 6000 mm. # Size can be customised as per requirement.    Technical Specifications –   # Maximum Working Pressure – 240 Bar. # Operating Temperature Range: -40˚C to 74˚C # Inlet and Outlet Connection – As per Requirement. # Hydraulic Test Pressure – 300 Bar. # Pneumatic Tested Pressure – He gas at 240 Bar.   Main Component Details –   # Inner Coil – SS 316 Grade. # Outer Coil – SS 304 Grade. # Spring – SS 304 Grade. # Connectors – SS 304 Grade.  

• Grade: One loose flange, one fixed flange; Two fixed flanges or two loose flanges are on request.
• Pipe: ASTM A106 grade B, in compliance with ANSI B36.10
• Flange: ASTMA105, in compliance with ANSI B16.5/Class 150lbs; JIS 10K or DIN is also available on request.
• Lining: Pure PTFE in compliance with ASTM F1545-97

Material Rubber Reinforced Lined (RRL) Hoses Size 63 mm x 15 mts (Standard) (Length as per client requirement) Couplings Gun Metal (LTB-II), Aluminium, Stainless Steel (wound at the end of Hose Pipe) Binding Wire Copper or G.I Wire Specification IS: 636 Hyd Pressure Tested at Hydraulic Pressure 21.4 Kgcm2 with Burst pressure 35.7 kgcm2 Note: - Above said Delivery Couplings bear SUPEREX make and ISI mark conforming to IS: 903

• Brand Name: TSB LIVPURE PVC GARDEN PIPE

Quality : go green (single color, double decor, transparent), gold, diamond size : 1", 34", 1", 1.14", 1.12".

• Length: 6000
• Shape: Round
• Thickness (mm): 20 to 150
• Width: As per round size
• Surface Finish: As rolled
• Edge Conditions: Trimmed

We are offering stainless steel shower tube.

• Material: PVC
• Color: Grey

SOLAR WATER HEATER Solar Water Heater Evacuated Tube Collector is made of double layer borosilicate glass tubes evacuated for providing insulation. The outer wall of the inner tube is coated with selective absorbing material. This helps absorption of solar radiation and transfers the heat to the water which flows through the inner tube. Advantages When comparing peak efficiency levels it may seem that there is little difference between flat plate andevacuated tubes, in fact flat plate may actually be higher, but this is during minimal heat loss conditions.When averaged over a year evacuated tube collector have a clear advantage. The key points are:

• Color: Blue, Green, Transparent, Black
• Brand Name: KBL
• Size: 1/2 inch, 3/4 inch, 1 inch, 2 inch
• Single Hose Length: 6m-12m, 12m-20m, 20m-30m
• Outer Diameter: 12 mm
• Working Pressure: 25 Kg/cm2
• Standard Length: 30 Meter,50 Meter,100 Meter
• Types Available: AAA and AA
• Burst Pressure: App. 2.5 times of W.P.

• Material: Nitrile Rubber
• Color: Orange
• Brand Name: Suraksha,Suvidha,Kwality
• Supply Ability: 300000 Meter/Meters per Month
• Lead Time: Shipped in 14 days after payment

• Color: Yellow
• Brand Name: KBL
• Outer Diameter: 20 mm
• Internal Diameter: 10 mm

• Type: Lpg Gas Hose
• Material: Plastic, Pvc, Rubber
• Certification: ISO 9001:2008
• Length: 1mtr, 2mtr, 3mtr, 4mtr
• Application: LPG Gas Use
• Color: Blue, Red, Transparent, White
• Feature: Anti-UV, Eco Friendly, Flexible, Good Quality, Heat Resistance, Leak Proof, Long Life

We deal in a comprehensive range of lpg pigtail hose that is used for connecting the adaptor on the cylinder/burner valves to allow the gas flow. Designed by experts, the quality and performance of this hose has placed us amidst the leading lpg pigtail hose manufacturers and suppliers in india. types available : cylinder pigtailburner pigtailburner + cylinder pigtail why our lpg pigtail hose? leak proof structurepromotes safe usageflexible designinglong service lifefire resistant required for : domestic sectorcommercial sectorindustrial sector

• Material: Plastic
• Color: White
• Country of Origin: Made in India
• Dimension: 1.5m Length
• Usage/Application: For filling water in the machine.

• Size: All sizes are available
• Features: Elegant look,Perfect finish,Skin friendly
• Appearance: Attractive

FEATURES Excellent resistance to abrasion and to intensive professional use. Highly resistant to both contact and radiant heat. Lightweight and Heavy duty hose, remaining flexible even at low temperatures (-10°C). Easy to handle and wind up, great flexibility. High breaking resistance special textile construction. No maintenance or drying required. Binding Available in Galvanized Iron (GI) Copper (CU) Stainless Steel (SS) Coupling available in GM, SS & AL.   APPLICATIONS   Ideal Use: Fire Squad RRL Hose with couplings are suitable for fire fighting purposes. The delivery hose couplings are of instantaneous pattern, pull release type with ribbed tail and are manufactured to comply to IS: 903-1993 standards. The RRL hoses  are suitable for use at working pressure upto 14 bar.

Paint Spray Hose, Air Hoses

Rugged construction hot melt heated hoses include a Teflon® core, a reinforced stainless steel braid and enhanced high temperature insulation with a durable polyester braid cover for abrasion resistance. 115 VAC hoses are suitable for HM044-115 Tank Controllers only. 5 Steps in selecting a hose The electrical connection for a manu...