Iron Pipes Dealers in Delhi

We bring forth a wide gamut of Ductile Iron Pipes. We manufacture, export and supply outstanding range of Ductile Iron Pipes to our valuable customers. The Ductile Iron Pipes, offered by us, are widely appreciated for durability, longer service life, rust free nature and dimensional accuracy. Used for transportation of water and sewage, Ductile Iron Pipes are known for threading and bending ability. Features : Dimensional accuracyRust free propertiesDurableLonger service life

• Material: Ductile Iron
• Hardness: 60-70HRC
• Section Shape: Round
• Class of Pipe: C20,C35,C30,C40,C50,C64 and C100
• Size Range: DN 80mm to DN 1200mm
• Standard Length: 5.5m/ 6.0m
• Outside Onsite Protection: Polyethylene Sleeving
• Coating: Bitumen/Eposy/Polyurethane or as per customer requirement.

• Country of Origin: India
• Material: Iron
• Shape: Round
• Feature: Anti Corrosive, Eco-Friendly, High Quality, Shiny Look
• Finishing: Polished
• Thicknessa: 0.5-1mm

• Type: Aluminum Mixing Tubes
• Material: Aluminum
• Shape: Round
• Finshing: Non Polished, Polished

We are the leading manufacturers, exporters and supplier of this products.

• Material: Ductile Iron
• Diameter: 100 Mm - 1200 Mm
• Length: 4 Meter - 6 Meter
• Standard: IS:8329 And ISO:2531

Ductile Iron Spun Pipe involve a normal pipe end, the spigot, being inserted into the socket or bell of another pipe or fitting with a seal being made between the two within the socket. Normal spigot and socket joints do not allow direct metal to metal contact with all forces being transmitted through the electrometric seal. They can consequently flex and allow some degree of rotation, allowing pipes to shift and relieve stresses imposed by soilmovement. The corollary is that unrestrained spigot and socket joints transmitessentially no compression or tension along the axis of the pipe and little shear. Any bends, tees or valves therefore require either a restrained joint or, more commonly, thrust blocks, which transmit the forces as compression into the surrounding soil. Thus, Spun Pipes have higher tensile strength, yield strength, ductility and impact resistance which are the reasons why the use of Ductile Iron Pipes has grown up at a rapid rate. We deal in this product at an all India Level having tie ups with the major manufacturers. Also to meet the demands of customers, we keep stock of the same at all the time so that we can give a faster service so that customers do not have to wait for the material to come from the plant.

• Type: Ductile Iron Pipe
• Diameter: 100-1200mm
• Shape: Round
• Application: Supplying Water
• Grade: K7,K9
• Color: Black
• Finishing: Polished

We have become a preferred choice of the patrons owing to our timeliness and client centric approach. To easily organize and stack the entire lot of products in our warehouse, we have installed an automated warehousing system. It is supervised by our warehousing experts.

• Type: Flexible
• Material: Galvanized Iron
• Diameter: 50 mm
• Shape: Round
• Thickness: 5 mm
• Length: 105 Meter
• Color: Grey
• Certification: Electrical Cable

• Application: Concrete Use
• Finishing: Non Polished
• Thickness: 4.5mm
• Size: DN 125
• Section Shape: Round

• Material: Galvanized Iron
• Shape: Round
• Length: 5-10Mtr
• Application: Industrial
• Feature: Rust Proof, Perfect Shape
• Finishing: Polished

• Length: 3m
• Thickness: 3-5mm
• Brand Name: Neeco
• Standard: IS-15905
• Usage/Application: Utilities Water
• Size: >3 inch
• Unit Length: 3m
• Single Piece Length: 3 meter

• Type: Concrete Pump Pipeline

The Ductile Iron Spun Pipes are made from ductile iron known for their high tensile strength, ductility, corrosion resistance and impact resistance.High alumina (calcium aluminate) cement mortar.

Ductile Iron Spun Pipe involve a normal pipe end, the spigot, being inserted into the socket or bell of another pipe or fitting with a seal being made between the two within the socket. Normal spigot and socket joints do not allow direct metal to metal contact with all forces being transmitted through the electrometric seal. They can consequently flex and allow some degree of rotation, allowing pipes to shift and relieve stresses imposed by soilmovement. The corollary is that unrestrained spigot and socket joints transmitessentially no compression or tension along the axis of the pipe and little shear. Any bends, tees or valves therefore require either a restrained joint or, more commonly, thrust blocks, which transmit the forces as compression into the surrounding soil. Thus, Spun Pipes have higher tensile strength, yield strength, ductility and impact resistance which are the reasons why the use of Ductile Iron Pipes has grown up at a rapid rate. We deal in this product at an all India Level having tie ups with the major manufacturers. Also to meet the demands of customers, we keep stock of the same at all the time so that we can give a faster service so that customers do not have to wait for the material to come from the plant.

• Quality :: ST52 - API 5 L/B - ST37
• Wall thickness :: from 2 mm to 10 mm or more

Steel pipes, complete with weld-on collars at the end, may be straight or curved and are used both for booms and for ground pipeline. They can be supplied in various types and quality:

We offer erw balck & gi pipes upto 350 nb.

• ERW Steel Tubes: 150 mm to 400 mm NB.4.

G.I. Pipes (Galvanized Iron pipes) are steel pipes that have been covered with a layer of zinc metal by a process called 'Galvanizing'. During galvanizing, steel is immersed in a molten zinc bath to ensure a hard, smooth barrier of Zinc coating on it. Zinc's natural corrosion resistance provides long-term protection against water corrosion in indoor and outdoor environments, G.I. pipes and tubes are used in building and structural materials all over the world. Users seeking long term structural performance in humid outdoor applications have turned to Galvanized steel pipes as they protect against the attack of water, humid or dry winds and road salts.

• Diameter: 8 mm
• Color: Black
• Material: PVC
• Shape: Round
• Surface Finish: Paint Coated
• Size: 18 Inch (L)
• Usage/Application: Gas Handling

We are authorieds dealer and supplier of Jindal Saw Di Pipe. 

• Material: Concrete
• Thickness: 10-20mm
• Condition: New
• Length: 2000mm, 1000mm, 3000mm etc.
• Weight: 40kg
• Hardness: HRC 58-62

• Thickness: 4mm
• Shape: Round
• Material: Galvanized Iron
• Features: Rustproof
• Usage/Application: Industrial
• Size: 1.5 inch

• Application: Structure Pipe
• Color: Yellow
• Material: MS
• Length: 1-6 meter
• Finish Type: Paint Coated

ductile iron spun pipes a firm position in the market of Ductile Iron Pipes, which makes the organization the leader in the area of water and waste water transportation.

• Shape: Round
• Country of Origin: Made in India
• Connection: Flange
• Material: Cast Iron
• Thickness: 12 mm
• Size/Diameter: 200 mm
• Usage/Application: Utilities Water
• Brand: Neel

• Shape: Round
• Material: Galvanized iron
• Color: Silver
• Size: 3/4
• Unit Pipe Length: 6-12 m

as per IS:8329/2000 grade k-7 & k-9

CI Pipes, Pvc Pipe Fittings, PVC Pipes, Cast Iron Pipes

Galvanized Iron Pipes, mild steel black pipe, Mild Steel Hollow Section

• Country of Origin: India
• Type: Cast Iron Pipes
• Material: Cast Iron
• Shape: Round
• Thickness: 10.5-11mm, 14.5-15mm, 6.5-7mm
• Application: Gas, Sewage

branded or non branded