Jointing Kit Dealers in Bhagirath Palace, Delhi

• Type: Flexible
• Material: Polyolefin
• Application: Electrical

• Material: Silicone Rubber
• Application: Electrical Industry
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger
• Protection Level: High Level
• Frequency: 50hz
• Tensile Strength: 1-5mpa

 An 11 kV cable joint kit is a specialized set of components used for joining or terminating medium voltage (MV) power cables rated at 11 kilovolts (kV). These kits are essential in electrical distribution networks where medium voltage cables are used to transmit and distribute electricity. Here’s a detailed explanation of the components, purpose, installation process, and considerations for 11 kV cable joint kits: Components of an 11 kV Cable Joint Kit Cable Preparation Materials: Semi-conductive Tape: Used for cable insulation shielding. Scotch Tape or PVC Tape: Used for wrapping and insulation. Cleaners and Degreasers: Used to clean cable surfaces before installation. Joint Components: Heat Shrink Tubes: Provide insulation and environmental sealing. Resin or Gel Filling: Used for moisture protection and mechanical strength. Connector Kits: Including connectors, lugs, or terminals for cable ends. Armor Clamps: Provide mechanical protection for armored cables. Installation Accessories: Cable Ties and Fixings: Secure components during installation. Gloves and Safety Equipment: Personal protective equipment for installers. Installation Instructions and Documentation: Guidelines for proper installation. Purpose of 11 kV Cable Joint Kit Electrical Continuity: Ensures a continuous electrical path between cables or cable ends. Mechanical Strength: Provides robust mechanical support to the joint, protecting against physical stresses. Insulation and Sealing: Prevents moisture ingress, which can lead to cable deterioration and electrical faults. Safety: Ensures that joints meet safety standards and regulations to prevent hazards like short circuits or electrical shocks. Installation Process Cable Preparation: Stripping: Remove cable insulation to expose conductor cores. Cleaning: Use cleaners to remove dirt, grease, or contaminants from the cable surface. Semi-Conductive Layer: Apply semi-conductive tape to shield the cable insulation. Joint Assembly: Connector Assembly: Attach connectors or lugs to the cable ends. Positioning Components: Arrange heat shrink tubes, resin packs, and other components as per manufacturer instructions. Sealing and Insulating: Heat Shrink Application: Apply heat to shrink tubes, providing insulation and sealing against moisture. Resin or Gel Filling: Pour resin or gel into the joint to fill voids and provide additional insulation and mechanical support. Armor Clamping (if applicable): Secure armor clamps around armored cables to protect against mechanical damage. Testing and Commissioning: Continuity Testing: Ensure electrical continuity across the joint. Insulation Resistance Testing: Verify insulation integrity using appropriate testing equipment. Visual Inspection: Check for any signs of damage or improper installation. Considerations for 11 kV Cable Joint Kit Regulatory Compliance: Follow local regulations, standards (such as IEC, IEEE), and manufacturer guidelines for proper installation and safety

heat shrink indoor and outdoor termination [11kv/22kv/33 kv]heat shrink straight through jointing kits[11kv/22kv/33kv]BRAND AVAILABLE – 3M, RAYCHEM RPG, DENSON

After Preparation of cable, the Cable outer conductor/ Jointing Sleeve is tighten and blocked on 360 degree between the cone of the connector body and the flexible rear clamp, resulting in high grade mechanical retention and a perfect electrical continuity and complete shielding. All inner contacts are captivated, thus avoiding any risk of damage during coupling of male to female connectors.   We recommend three Grounding Kits per feeder run. One kit is required at the top, one at the bottom of the run, (plus one at 50 meters interval wherever applicable) and one at entrance to the equipment shelter.   Grounding Kit that have been specially tailored to each cable size can be installed very easily and rapidly, once the jacket is stripped at the required dimensions, one kit can be installed in less than three minutes. Kits are provided all hardware necessary to connect the ground wire to the tower ground bar.

• Material: Mild Steel
• Feature: Excellent functionality, Compact design, Easy to use
• Usage/Application: Electrical Industry
• Packaging Type: Box
• Automation Grade: Manual
• Flame Retardant: Yes

• Feature: Reliable, Less maintenance

• Type: Outdoor
• Power: 11kv
• Number of Cores: 3 Core
• Core Type: Single Core
• Conductor Size: 150 and 185 sq. mm.
• Brands: 3M

• Feature: Excellent functionality ,Compact design ,Easy to use
• Material: Mild Steel
• Usage/Application: Electrical Industry
• Packaging Type: Box
• Automation Grade: Manual
• Flame Retardant: Yes

• Type: Indoor
• Country of Origin: Made in India
• Usage/Application: CABLE JOINT
• Cable Joint: HEAT SHRINKABLE
• Conductor Size: 50 MM TO 630 MM
• Voltage Type: High Voltage
• Core Type: 3 Core
• Brand: 3M

Jointing Kits, Connectors, Switch Gears, lt transformers, HT Transformers

Cable Jointing Kits, smc junction box, Thimbles, Copper Plates

Electrical Jointing Kit, domestic light, Electrical Cable

Cable Jointing Kits, cable jointing systems, cable modem termination system

Cable Jointing Kits, Cable

Cable Jointing Kits, Electrical Products, hardwares accessories

Jointing Kits, Cable Trays, godo switches, Wires, Electrodes, PLATES

Jointing Kits, NFC Type AB Cable Accessories, Tinned Copper Fuse Wire