Jolting Apparatus Dealers in Delhi

For making standard rectangular specimens of 40 x 40 x 160mm. Of port land and pozzolana cement mortar for determining the transverse strength. Salient Features Specifications : The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800mm from the centre of the table. There is a projecting lug with a plane face on the lower face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gear box through a V-belt and pulleys. The cam rotates at a rate of 60 rev./min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, single phase. A.C.supply. Spares and Accessories :- (1) Steel mould with base plate having three compartments each having 40mm x 40mm x 160mm. internal dimensions. (2) Apparatus for demoulding the specimen.

The jolting apparatus consists of a rectangular table, rigidly connected by two support arms to spindle at a horizontal distance of 800 mm from the center of the table. The table can be raised and allowed to fall freely by a cam, which is connected to a motor.

Jolting Apparatus, Supplied complete with mould and hopper. Suitable for operation with 220 V, 50 cycles, single phase, AC Supply

It is used to design special kind of moulds at the rate of 60 jolts per minute.

• size: 40mm x 40mm x 160mm.

The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table. There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V-belt an pulleys. The cam rotates at a rate of 60 RevMin. A stroke counter fitted with micro-switch is provided which stops the machine after 60 Jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be supplied at an extra cost.

The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table. There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V-belt an pulleys. The cam rotates at a rate of 60 Rev/Min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 Jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be supplied at an extra cost. Spares and Accessories : (1) Steel mould with base plate having three compartments each having 40 x 40 x 160 mm, internal dimensions. (2) Apparatus for de-moulding the specimen.

• Model: 40 x 40 x 160mm.
• Model: ASI-542
• Power supply: n 230 Volts, single phase, A.C. supply.

The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table. There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V-belt an pulleys. The cam rotates at a rate of 60 RevMin. A stroke counter fitted with micro-switch is provided which stops the machine after 60 Jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be supplied at an extra cost.

Our company is a leading Manufacturer, Exporter and Supplier of the Jolting Apparatus. The Jolting Apparatus is used for making standard rectangular specimens of 40 x 40 x 160mm. of Portland and Pozzolana Cement Mortar for determining the transverse strength. The Jolting apparatus is suitable for operation on 230 Volts, Single Phase, A.C. Supply. Technical Specifications Consists of a rectangular table connected to a spindle by two support arms (distance of 800 mm from the centre)Projecting Lug with a plane face on the upper face of the tableA stop with a rounded upper surface below the Projection LugA cam connected to motor and gearbox through V-belt pulleys (Rotates at a rate of 60 Rev/Min) Stroke counter fitted with micro-switch is provided to stop the machine after 60 JoltsLocating pins for mounting the mould compartments on the tableSupplied complete with mould and hopper

Jolting Apparatus, subsonic wind tunnel, Colour Matching Cabinet