KND Steel Syndicate Naraina, Delhi

UNION BALL JOINT  

TUBE TO HOSE CONNECTOR  

Our Twin Ferrule compression tube fittings accessories have been carefully manufactured to withstand the demands made of high performance tube fittings, such as high pressure, vacuum, vibration, temperature and impulse. The compression tube fittings are manufactured to exacting tolerances using the most modern and advanced computerised automation.   Our compression tube fittings are composed of four parts: Body, Front Ferrule, Back Ferrule, Nut. This compression tube fitting is a mechanism used both to seal and to grip tubing. The mechanical advantage and geometry of this kind of fitting produces a leak-tight assembly. To assemble, simply insert the tube into the complete assembly until the tube bottoms-out against the shoulder of the fitting body. The two ferrules are driven forward between the nut and fitting body using the mechanical force created by rotating the nut clockwise. The back ferrule is driven against the tapered rear of the front ferrule and the front ferrule is driven by force into the tapered mouth of the body. The rear ferrule is swaged radially inwards on the tube while lifting the front ferrule out to form a full-faced seal on the tapered surface of the body. The 1 1/4 turn of the nut from the hand tight position assures consistent drive of the sealing members. This ensures an effective seal against high pressure as well as ultra clean conditions.

STREET ELBOW  

Product description: knd steel syndicate serves a wide range of the steel industry. Our cold rolled carbon steel strips and coils are fit for demanding automobile & industrial applications. We cater to auto component manufacturers, electrical switchgears, cutting tools, pen clip, hair clip, hanger clip, chain link manufacturers among others. Available strip & coil grades - c-40 en-8 mc 11 c-55 en-9 mc 12 c-60 en-43 d c-80 en-42 j c-98 en-44 d 50crv4 en-47 strip & coil sizes - width from 5 mm to 400 mm thickness range - 0.10 mm to 5.0 mm hardness range - fully annealed, annealed, as rolled surface finish - bright mirror finish

Certification : BIS Certified

Specifications Pressure : 125WSP @ 350°F Max End Connection : Threaded Application : Steam

Material : Spring Steel

Thickness : 0.25 Mm

Grade : C55

Pressure : 300 psi 600 WOG 300 WSP End Connection : Threaded Application : Water/Steam/Oil/Gas

REDUCING HEX NIPPLE

REDUCING BUSHING  

PIPE PLUG  

PIPE CAP  

NEEDLE VALVE NEEDLE VALVE   VALVELE VALVENEEDLE VALVE

Description The Series VXL100 mini flow valves are designed to provide a constant fixed flow rate of non-corrosive gases and mixtures from disposable cylinders which are applicable for aerosol type Aluminum Canisters for Calibration Gases. These valves are used with 20L canisters. They offer a low cost and convenient method of gas flow regulation between 0.5 – 1.5 l/min by adjusting a knob on top of the valve.   Features Used with 20L canisters flow regulation between 0.5 – 1.5 l/min

MALE TEE  

MALE ELBOW  

LONG HEX NIPPLE

HOLLOW HEX PLUG  

Thickness : 0.25 to 5.00 mm

HEX NIPPLE

HEX COUPLING

  Description The Series VXL105 fixed flow regulators are designed to provide a constant fixed flow rate of non-corrosive gases and mixtures from disposable cylinders fitted with a C-10 connection.   Features Built-in on/off valve. Integral inlet and outlet connections provide convenient compact size. Outlet orifice and preset delivery pressure provide specific flow rate when on/off valve is opened. Pressure gauge monitors cylinder pressure. 50 micron inlet filter.  

FEMALE TEE

FEMALE ELBOW