KAN-THT (INDIA) PVT. LTD. Pitampura, Delhi

ARC-40H is developed for the purpose of easy, quick and bubble free charging materials after mixed, defoamed and dispersed by THINKY MIXER. Small syringes such as 3ml, 5ml and 10ml can be used. The simple configuration allows for easy cleaning.

Weight : 7.5kg

This mixer can disperse high specific gravity powders, such as LED Phosphor, into base materials without sedimentation.Due to the newly adopted rolling mechanism, the significant power-savings can be realized.Additionally, with both the multilingual interface and the universal power supply, this mixer is available in various area in the world.

This Rotary Tube Furnace comes complete with DC variable speed control and temperature control system. The rotary tube furnace can be for industrial or laboratory use and is cost effective for Research and Development environments.

This Rotary Tube Furnace comes complete with DC variable speed control and temperature control system. The rotary tube furnace can be for industrial or laboratory use and is cost effective for Research and Development environments.

thermal diffusivity and specific heat. The capabilities of TPS 3500 go well beyond that of any other Hot Disk instrument to date, Automatic Temperature series measurements (Isothermal Steps) are easy to perform using either an optional external Furnace or a temperature-controlled Circulating Bath. These external devices can be directly controlled through the Hot Disk Thermal Analyser software to ensure ease of use.The basic TPS 3500 system includes everything to allow you to begin making measurements, including installation and on-site training. The system includes: Hot Disk TPS 3500 instrument; Isotropic, One-dimensional and Structural Probe measurement modules; a Sensor; Insulating Support-Material for Single-Sided testing; Stainless Steel Verification Samples and Room-Temperature Sample Holder.

Thermal Conductivity Meter is a portable instrument for the measurement of thermal conductivity and thermal resistivity in accordance with ASTM D5334 – Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Proce-dure.The TLS 100, designed with ease of use and convenience in mind, is capable of testing soils and other soft materials with an excellent accuracy of 5% and reproducibility of 2%. With the available on-board memory, several measurements can be saved and stored. At any point the transfer of saved measurements to a PC is simple and involves the use of either the SD memory card for direct trans-fer to Microsoft Excel via an available card slot on the PC or by using the included TLS 100 uploading software.

Thermcraft’s Hinged High Temperature Split Tube Furnaces are for applications that need temperatures up to 1530°C (2800°F). We can customize our tube furnaces to be single zone or multiple zone configurations, and design them for vertical or horizontal operation. The furnace pictured has (SiC) silicone carbide heating elements.

This Vertical Split Tube Furnace has three zones with ceramic refractory heating elements capable of temperatures up to 1200°C (2200°F). It is mounted on a portable heavy duty stand that can be relocated as required. Heated chamber: 7″ ID X 36″ high.

The EQP-100 Press can be programmed to apply pressure up to two times in the same process, offering the possibility of digitally regulating the time and the pressure, and the time elapsed in each pressing cycle; this time is necessary, in some cases, for the sample to purge occluded gases – these gases are, generally, the reason for irregularities or cracks the beads-. This capacity makes of it the optimum alternative in the case of difficult samples.

Weight : 75 kg.

Metal particles with high specific gravity such as solder particles settle to the bottom of containers in cold storage and cause differences in material viscosity. The SR-500 regulates the viscosity of solder paste in a short time, with uniform viscosity from top to bottom. Also, because it can remove air bubbles thought to cause spattering of solder balls, it contributes to reducing the defect rate.

The Chemical Processing Industry has been safer from its first availability in 1980! The ARC has specific features and advantages that make it unique and preferable to all other technologies that were available at this time – and today 30 years later this technology is still the number one choice for most people focusing in the area of quantifying exothermic reactions, effect of heat upon materials and simulating runaway reactions.THT has played the major role in ARC technology development and has continuously kept ARC technology in manufacture. THT has produced up-to-date instruments and has extended and enhanced the technology as requested, by users. THT has worked with users worldwide to understand their needs and to develop new products and applications.

The Chemical Processing Industry has been safer from its first availability in 1980! The ARC has specific features and advantages that make it unique and preferable to all other technologies that were available at this time – and today 30 years later this technology is still the number one choice for most people focusing in the area of quantifying exothermic reactions, effect of heat upon materials and simulating runaway reactions.

The acoustic insulation lining the inside helps to achieve a low noise level during the milling process, avoiding thus the exposure of the user to noise.The fixing system of the milling jars, as well as the interlocking system of the door preventing it from opening until the engine is completely still, make of this mill a highly safe unit.The frequency converter in the mill, apart from allowing adjusting the speed of the engine to the most appropriate for each type of sample, enables the unit to reach the working speed as well as go to zero speed using an acceleration or deceleration ramp, avoiding the unit from vibrating in the starting up and stopping process.The grinding of the sample is made inside the jar with the initial hitting of the discs and the subsequent friction resulting between the discs and the jar. The milling times are really short.

Power : 220V

The EV calorimeter is necessary for larger batteries, modules and small packs, power tools, satellite, military and associated applications. The EV calorimeter is used when variation of heat release over surface area (MultiPoint measurement) is to measured and associated thermal management applications. The EV calorimeter is rugged and is sited in a secure Containment Vessel.Within the containment vessel the standard ARC calorimeter (as in ES-ARC) can be used and this is regularly supplied for “Double Systems”. Such a system gives versatility capable of measuring:- small prismatic, coin cell, 18650 and other larger batteries used in power applications.With the EV system all safety tests can be carried out as well as Battery Performance studies.

The well-established TPS technique – today used in more than 600 laboratories – is highly appreciated for its ability to simultaneously and quickly determine thermal conductivity, thermal diffusivity and specific heat capacity from a single measurement, with minimum sample preparation. Utilizing the unique Hot Disk sensors, the TPS 1500 system serves as a robust tool for testing the thermal properties of solids, powders, pastes and foams. If larger samples are available, also highly conducting samples, such as metals, semi-conductors and high-conductivity oxides, can be tested.

The Floor Stand Box Furnace has a double pivoting hinged door that keeps the high temperature interior face of the door away from the operator for safety. This type of box furnace is typically designed for industrial use, but can be used in an R&D or laboratory environment as well.

The Floor Stand Box Furnace has a double pivoting hinged door that keeps the high temperature interior face of the door away from the operator for safety. This type of box furnace is typically designed for industrial use, but can be used in an R&D or laboratory environment as well.The Bench Top Box Furnace with control system is designed for laboratory and industrial use.