Lab Incubator Dealers in Delhi

Double walled inside made of Aluminium/ Stainless Steel Sheet. The outer body is made of thick Mild Steel Sheet and painted in Epoxy Powder Coating. Having thick mineral wool insulation between the two walls. Synthetic Rubber Gasket is provided on the door for better grip. The temperature is controlled by a Precision thermostat variable upto 60 º C with a sensitivity of plus minus 1 º C. To work on 220/230 Volts A.C. only. Supplied complete with shelves, indicators, wire and plug but without thermometer. This incubator has double door outer is metal door and inside is glass door in stainless steel frame. There will be no glass window outside. If, you require glass window outside please specify while placing order. In this Case we shall not provide inside glass door.   Electronic digital temperature controller-cum-indicator can not be fitted in incubator

M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with mineral wool to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss. Temperature Range: Few degrees above ambient 70°C with temperature accuracy of ±1°C. Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating. Ventilator: Placed on the middle of both side. Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion. Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug. Safety Feature: Thermostat based safety device Shelves: Stainless steel perforated/wire road shelves adjustable and sliding. Door: Door with synthetic rubber gasket & Door has a glass viewer window. Heater : Tubular U type air heater

Temperature Thermostatically controlled by hydraulic thermostat 5ºC above ambient to 70ºC with a sensitivity of + 0.5C in Bare Incubator. Beaded heating elements are placed in ribs at the bottom and sides, Double walled, inside Aluminum or Stainless steel & outside mild steel sheet painted with attractive stove enamel. Door has double glass viewing, built in horizontal L-shape glass thermometer with wire mesh Nichol plated adjustable trays, Rocker Switch with Indicator & Thermostat Indicator, to work on 220/230 Volts A.C. Stainless steel Chamber.Optional Accessories : 1)  Air circulating fan can 2)   Mechanical timer of 2 hours Digital Timer of 99.59 Hours  4) PID Micro Processor Controller Dual Display with safety alarm with air circulating fan without T.M. & Thermostat 5)  PID Micro Processor Controller Dual Display with Air Circulating fan with Direct Printer Port cable

• Material: Metal
• Application: Industrial
• Brand Name: Rebico
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

We are a celebrated Manufacturer and Supplier of Water Bath Incubator Shaker in Delhi. The Water Bath Incubator Shaker (Metabolic Shaker), offered by us, is a desktop model, especially brought forth for studies and research. It is tested on all crucial parameters such as performance, lifespan, efficiency, etc. It is doled out in varying sizes and specifications, as per the client’s requirement.   Details Desktop model designed for studies on tissue metabolism, Enzymes and protein coagulation or other experiments required shaking of subject matter at constant speed under controlled Temperature environment. It is  a walled unit inside made of thick S.S. Sheet and outer of M.S. Sheet Duly powder coated. The paramedical lid of S.S. Prevents falling of Condensed water droplets on the Specimens. Heating is achieved through an immersion type heater and the temperature is controlled By DIGITAL TEMP. Indicator cum controller with an accuracy of ± 0.5° C, the bath has an oscillating. Tray riding on ball rollers oscillated through a geared variable speed motor shaking speed range is is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flasks Of 25 ml or 50 ml or 100 ml or 250 ml or 500 ml or 1000 ml. As per ordered by the users. (Kindly the Capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, co and plug, to work on 220/230 volts A.C. Supply Available with heating arrangement only (having Temperature range from ambient to 100°C,) or with both heating and cooling arrangements (having Temperature range from 5°C, to 100°C,)   Size 275 x 275 x 75 mm        275 x 275 x 150 mm        405 x 300 x 150 mm 

• Chamber Volume: 400 Litre, 350 Litre, 500 Litre, 250 Litre
• Number Of Shelves: 3 Shelves, 4 Shelves, 2 Shelves
• Temperature Range: 5 to 75 Degree Celsius
• Condition: New
• Material: SS / MS
• With Interior Light: Yes
• Brand: SRI

We are enlisted among the preeminent Manufacturers, Suppliers and Exporters of Orbital Shaker Incubator. The incubators we make available undergo numerous quality-test based on different parameters before the final dispatch. When it comes to bulk orders of the incubators, we make use of the fastest modes of transport in order to avoid any delay at the buyer’s end. Buyers can obtain these at reasonable rates from us.

Agro Equipment Industries is one of the reliable Egg Incubator Manufacturers and Suppliers. Our Egg Incubator is equipped with Double pressure fan. Specifications for Electric Automatic Incubators and Hatchers : Designed to operate on 220 Volts AC either single/three phase as specified by the customer.The exterior body is of fiber glass whereas the inside body is of galvanized sheets and high quality insulation.The front door provided is wide for easy access and maintenance, with a see through glass for observation.A slot is provided at the top for water supply which flows in the water pipes sealed beneath the insulation for effective humidity. Also, a control system is provided for maintaining the desired humidity.Control Panel – Separate switches for the following functions areprovided.HumidityPrimary heaterSecondary heaterAuto turningManual turningElectric motor for turningSealed heater with double element.Double pressure fan.Water cooling system for summer season.Double temperature switch for primary and secondary setting.Two thermometers for dry temperature and humidity are provided for effective mechanism of the Incubator/Hatcher.Heavy duty fans provided to eliminate air pockets and maintain uniform air drift at the temperature required. The Built in cooling central device works to eliminate excess heat.Capacities available - 1000/2500/5000/10000/15000/30000 eggsIn 1000 and 2500 eggs capacity the hatcher is in the same body as incubator. For higher capacities a separate hatcher is provided for easy operation and maintenance.

• Brand Name: REW

We provide an exclusive array of incubator. This range is developed using the double wall along with a thick aluminum & stainless steel sheet which has been placed inside the chamber. Also, the outer body of this machine is manufactured using m.s. Which is duly finished with the help of powdered coating. Additionally, the thermostat controls the temperature from 5°c to above room temperature 90°c with an accuracy of ± 1°c

Details : Specially designed to meet the requirement for incubation of bacteria to decompose organics matter in waster water. It is used for biology, botany, Virology and Oceanoloraphy. Water pollution, sewage, agriculture, food and research departments also use it. In addition to this, it helps in preservation of vaccines. It provides a wide range of conditions for study of synthesizing organisms under tropical or temperature and summer or winter conditions. Temperature is controlled with an electronic digital temperature controller cum indicator with an accuracy of 0.5C or better. Switch and set the desired temperature (between 5 C to 50 C) with the help of digital temperature controller cum indicator. This controller has a dual display i.e. both the set temperature is displayed at the same time. The indicator has a controlling accuracy of 0.5 C or better.

We are offering laboratory incubator.laboratory incubator is a device used to grow and maintain microbiological cultures or cell cultures. The laboratory incubator maintains optimal temperature, humidity and other conditions such as the carbon dioxide (co2) and oxygen content of the atmosphere inside. Laboratory incubator are essential for a lot of experimental work in cell biology, microbiology and molecular biology and are used to culture both bacterial as well as eukaryotic cells. We are leading manufacturer of laboratory incubators in india. laboratory incubator construction : the unit is a double walled chamber, with glass wool / puf insulation. The interior of laboratory incubator is made of stainless steel and exterior is either made of mild steel finished in powder coating paint (powder coating on both sides of the mild steel) or stainless steel. The unit has full-length inner glass door and outside metal door with magnetic gasket and lock. The incubator is provided with perforated stainless steel trays. Forced air circulation for uniform temperature. Pu wheels for easy move ability.

• Application: Industrial Use
• Temperature range: Ambient+10°C to 60°C
• Temperature accuracy: ±0.2°C @37°C
• Temperature controller: Dual display PID controller Display SV & PV Auto tuning feature
• Temperature sensor: PT100
• Inner chamber: SS 304
• External cabinet: Powder coated GI sheet
• Insulation: Glass wool
• Door: Insulated door Mechanical latch / clamp Glass window
• Heaters: Resistance wire heaters
• Shelves: SS wire mesh (removable)
• Air circulation: Motorized blower / Axial fan
• Standard fittings: Mains on/off switch, Load Indicator, Fan on/off switch.
• Power supply: 220 Volts 50Hz
• Optional: GMP construction (Inner & outer SS 304), PLC + HMI controller w/, USB interface, 21 CFR Part 11 software Data logger w/ USB interface, Thermal printer, Inner chamber LED light .

• Country of Origin: India
• Type: Bacteriological Incubator
• Material: Stainless Steel, M.S Power Coated
• Certification: CE Certified
• Application: Laboratory
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Warranty: 1 Year
• No of Shelves: 2 Shelves
• Brand Name: Saiclave
• Usage: Lab Testing
• Shape: Rectangular
• Capacity: 45 L, 95L,224L, 336L
• Temperature Range: Few Degrees Above Ambient - 70 +/- 10 Deg C
• Automation Type: Automatic
• Phase: Single Phase
• Operating Voltage: 220 V AC

Jindal Hybridization incubators are designed to fulfill the requirements of day-to-day laboratory work. The durable high precision rotating convection oven is used for blot hybridization & other applications. Construction The inner chamber is made of heavy gauge Stainless steel sheet & the outer body is made of Mild steel sheet duly powder coated. The chamber is insulated from outer body with glass wool insulation to prevent thermal losses. The double pane glass door is duly insulated to prevent loss of temperature. The door consists of a mechanical door latch for locking purposes.    Temperature & Speed Control: The chamber consists of a motor blower assembly to maintain uniform temperature distribution throughout the chamber. A digital microprocessor based PID temperature indicator cum controller controls the temperature with a temperature range of Ambient +50C to 1000C.A speed regulator linked to DC motor controls the speed from 2 to 20 RPM. The digital speed indicator indicates the actual speed. The instrument is designed to operate on 220V 50Hz Single Phase AC Supply.  

• Type: Lab Incubator
• Material: Metal
• Application: Medical Use
• Voltage: 220V
• Condition: New
• Automation Grade: Fully Automatic

• Type: Lab Incubator
• Material: Aluminum, Metal, Mild Steel, Stainless Steel, Steel
• Application: Industrial Use, Medical Use
• Color: Black, Blue, Green, Purple, White
• Voltage: 110V, 220V
• Condition: New, Used
• Frequency: 50Hz, 60Hz
• Temperature: 0-50Deg C, 100-150Deg C, 50-100Deg C
• Volume: 100-150ltr, 150-200ltr, 200-250ltr, 250-300ltr, 300-350ltr
• Automation Grade: Fully Automatic, Semi Automatic
• No of Shelves: 2 Shelves, 3 Shelves

• Material: Stainless Steel
• Certification: CE Certified
• Application: Medical Use
• Voltage: 110V
• Temperature: 100-150Deg C
• Volume: 100-150ltr
• Automation Grade: Fully Automatic

• Brand Name: Indian Machine Mart
• Material: SS
• Frequency: 50 Hz
• Warranty: Warranty
• Voltage: 220-240v
• Hatching Ratio: 91-95%
• Spares: Yes
• Minimum Order Quantity: 1 Piece

• Country of Origin: India
• Type: Platelet Incubator & Agitator
• Material: Mild Steel
• Application: Medical Use
• Color: Grey
• Voltage: 220V
• Condition: New
• Automation Grade: Fully Automatic

G.B.ENTERPRISES‘ Platelet incubator and Agitator is designed for storage blood and blood components like platelet's rich platelet concentrate. It is ideal for blood banks and hospitals. CONSTRUCTION SPEC|FlCATlONS:Outer Body M.S. with power coated & inner Chamber stainless steel with 304 grade easy to clean. Proper individual insulated door and inner chamber. Solid rust-free cabinet to preventcorrosion. Heavy duty CFC Free Refrigeration system. Maintenance free, with hermetically sealed refrigeration compressor and reliable refrigeration to minimize noise and vibration, air cooled condensing system. The Incubator has continuous duty. 60 mm insulation high density polyurethane CFC free or equivalent Gaskets- Double seal silicon and automatic vaporizing system.TECHNICAL SPEClFlCATIONS:- Temperature Range: +22°C,: 2°C. Bags Capacity: 48Bag,64Bag,96 Bags oscillation 65 i 10% cycle/min. Power Supply: 180-220 AC V single phase. Transparent Glass door. Alarm for Power fail, High & Low temperature, Door open Low battery, High ambient temperature with indication.  Microprocessor controls LED Display. Temperature recorder with 7days chart recorder.

• Brand Name: U-Tech
• Temperature Range: 5 to 75 Degree Celsius
• Voltage: 220-240v Single Phase
• Material: MS
• Weight: 80-150 kg

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stove powder coated paint. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°Cand is controlled by electronically controlled by PID Microprocessor Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of + 0.5°C. Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near the cooling coils. Air is circulated by 2-nos. ISI mark Silicon bind motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.