Laboratory Apparatus Dealers in Karampura, Delhi

he fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,’U’ tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube – 30cm long with rubber bulb. Optional AccessoriesAt extra cost Balance with 0.001 gm resolution Stop Watch with 0.5-second resolution Manometer Liquid Whatman Filter Paper Filter Punch

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

• Machine Type: 12 Channel
• Brand Name: Maestros
• Driven Type: Electric
• Color: Grey
• Condition: New
• Voltage: 220V
• Certificate: CE Certified
• Type: Ecg Machine
• Weight: 5-10kg
• Warranty: 1Year
• Country of Origin: India

• Display: 7" Adjustable Touchscreen LCD.
• Output: 200 Test Programs and Over 100,000 Test Results.
• Temperature: Greater than 40 Degree
• Product Code: RS-232
• Detector: Silicon Photo Diode
• System Type: Windows Operation System

• Brand Name: Bionet
• Application: Resting & Diagnostic
• Minimum Order Quantity: 01 Piece

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

• Dial Gauge: .002mm x 12mm
• SIZE: 15cms. Dia and 30cms high
• Carrying Case Material: wooden

The CBR method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. It meets the requirements of BIS-2720 Part XVI and consists of Load frame. Our California Bearing Ratio Test Apparatus is designed with precision keeping in mind the needs of the clients, and are widely used for laboratories activities. The California Bearing Ratio Test Apparatus is made using high quality raw material, and is incorporated with many advantageous features. We make available California Bearing Ratio Test Apparatus with different speeds, and cater to the needs of the clients. Features Precision engineeredCustom manufacturedHigh performance rateHigh speed Available in Three speedSix speedTwelve speedThirty speed Specifications Hand operated Capacity 5000 kg.One CBR Mould 150 mm diameter and 175 mm high complete with base plate and collar 150 mm diameter and 50 mm high.One penetration Piston faces 50 mm diameter. Bracket.Displacer Block 148 mm diameter and 47.7 mm long.Surcharge Weight 5 kg and 2.5 kg with central hole and also slotted. Tripod Cutting collar.Proving ring, capacity 1000 kg.One diameterl gauge with least count .01 mm.California Bearing Ratio Apparatus Motorized Complete as above, but supplied with a motorized load frame with rates of travel of lead screw 0.025 mm/min.; 0.05 mm/min.; 0.0625 mm/min.; 0.125 mm/min.; 0.25 mm/min.; 0.5 mm/min.; 0.625 mm/min.; and 1.25 mm/min.Available in-Hand Operated, three speed, six speed, twelve speed and thirty speed.

• Driven Type: Electric
• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC. The Apparatus Consists Of : A loading unit motorized with capacity 5000 kgf with two telescopic pillars and an adjustable cross head Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.08cm per minute, operated on 230 volts A.C. 1 no. compaction pedal with specimen mold holder 2 nos. compaction rammers, 4.5kg weight and free fall 45.7cm 1 no. breaking head assembly with provision to fix flow meter 3 nos. specimen mold 10.16cm i.d. x 7.6cm high with base plate and extension collar 1 no. kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate Accessories : Integral type proving ring capacity 3000 kg A dial gauge 0.01 x 25mm

We are offering distillation apparatus. manufacturing high quality products with competitive prices.

Heat of Hydration apparatus is used for determining heat of hydration of cements by measuring difference between heat of solution of dry cement and heat of solution of a separate sample partially hydrated for 7 days & 28 days. Constant-speed stirrer maintains uniform temperature throughout liquid and supplies sufficient agitation to keep solid reactant suspended in the acid mixture. This equipment consists of insulated wood case, vacuum jar with stopper; thermometer plus holder, glass funnel; stirring paddle and chuck.

Acquisition Mode: 12 leads simultaneously A/D Converter: 24 bits Measurement Range: +-5mVp-p Time Constant: >=3.2s Frequency Response: 0.05Hz~150Hz (+0.4dB~ -3dB) Calibration Voltage: 1Mv+-2% Sensitively: Automatic, 1.25\2.5\5.5\ 10\20\40mm/mv (

Our team of quality examiners conducts stringent tests for ensuring the product quality.We team makes sure that all the trade transactions are made keeping all the details of the clients confidential.   Salient Features : High sensitivity compression proving ring cap of 200 kg Consolidation dia gauge 0.01 mm x 25 mm One strain dial gauge 0.01 mm x 25 mm One strain dia gauge 0.01mm x 25 mm Optional : Additional set of weights for normal stress of 5 kgcm2 Soil sampler for 60 mm x 60 mm specimen and test form pad of 50 Spares like porous stone for 60 mm x 60 mm size sample in pairs

According to the Chinese Traditional Medicine (CTM) theory, the body has vital energy called 'Chi' or 'Qi' that flows along main and collateral channels connecting our organs with other parts of the body. According to the CTM theory ?Block causes pain, no block no pain?.A pain on the body always indicates a blocked channel or a shortage of blood and Qi.As per CTM, better blood circulation serves as the key to the rheumatism treatment, as it removes blockages of channels and restores the circulation of blood, thereby relieving pain. Tiens Acu-Life Electro Acupuncture Apparatus uses pain-free method to clear the body channels to relieve pain, heal chronic ailments and prevent diseases.Based on the theories of the CTM main and collateral channels, Acu-Life adopts the electromagnetic wave to acupuncture body acupoints to adjust the channels and clear blockages. As a result, blood, Qi and internal organs stimulate free circulation of blood. While correcting the abnormal conditions of the organs, Acu-Life does not impact the normal physiological functions of the body. This product is easy to operate and safe to use.Product Advantages : Compared with other similar mono-functioning products in the market, Acu-Life has many advantages - Acu-Life effectively focuses on the hand acupoints and adopts the acupuncture treatment principles. Without piercing the skin, Acu-Life uses the electromagnetic wave to bring a healthy and safe effect. With an advanced technology, fashionable look of high quality, Acu-Life is very easy to use. Product Functions and Features? Acupoint probe - Easily and accurately probes the acupoints. (Always use specialized hand point diagram) Channel invigoration - by using electromagnetic wave to stimulate the acupoint and clearing the channels, this product improves blood circulation and metabolism and strengthens the immunity through magnetizing the body fluid. Health care effect - improves the blood circulation, strengthens immune system and prevents diseases. Adjustment - through hand point stimulation, those who are weak will be replenished while those who are over-nurtured will excrete. Easy to use - proper understanding and usage of hand-points diagram makes this product easy to use for a family. Portability - Portable size makes it easy to carry, convenient and saves space. Power saver - Uses less power for longer duration. Tiens Acu-Life Electro Acupuncture Apparatus MRP 38589.

• Weight: Approx 1kg
• Capacity: 30 Minutes or 45 Minutes
• Colour: Black
• Temperature: 90 to 1000 Degree
• Diameter: 110 mm to 170 mm
• Feature: Easy to Use

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

• Machine Type: Digital
• Number Of Channels: 6 Channels
• Battery Type: 2AA Li-Ion
• Operating Mode: Automatic
• Digital Display: Yes

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

The Specific Heat of nanofluids decreases as nanoparticle concentration increases. The specific Heat of nanofluids increases with temperature. The Specific Heat of nanofluids decreases as nanoparticle concentration increases. The specific Heat of nanofluids increases with temperature. Thus future research are required to measure thermophysical properties of different nanofluids as a function of temperature and concentration. Our Nanofluid specific Heat Apparatus is a good tool for Research and Laboratory experiment for Nanotech Labs. This apparatus is designed to measure Heat Capacity of nanofluids from RT+5°C to 70°C. The apparatus will consist of following parts- 1. Cooling system like fridge available in the lab. Thermally insulated chamber with heating arrangement and Temperature measurement system as per block diagram. 2. Data logger unit for measurement of Time, voltage, current and temperatures at regular intervals.   The power to system will be provided by D.C. power source with specially designed constant current supply to measure power vs temperature rise. The logged table on computer will be displayed as under. Fluid required-250 ml.   A software will automatically log all parameter, i.e. Power, Temperature vs. time at set interval. Heat capacity within temperature range will be displayed on the apparatus. System will be having USB interface where data can be recorded on a pen drive.

• Colour of Cuff: Brown, Black, Dark Green, Dark Blue, Beige

Die cast body gauge with epoxy powder coated, Easy to read round dial, calibrated upto 300mmHg ±3mmHg, Extra wide Velcro fasteners with extra long cuff.High quality rubber inflating bag and latex free bulb, Precision air release valve

Using Reverse Osmosis, Deionization and Distillation, we design and manufacture both readymade and custom built laboratory water purification systems for generating reagent water that may exceed specifications of CLSI, ASTM and USP. Our product range includes Lab Scale Reverse Osmosis Systems, DI Water Systems and RO + DI Water Systems. To know, which product is best suitable for your application, please talk to one of our executives. We need a water test report and end use of water, helping us to decide, which water purification system is suitable for your particular application. We guarantee of product performance and reasonable price all over India and overseas.

It is used for soil testing. It consist of sand pouring cylinder fitted with conical funnel, cylindrical calibrating container 10cm dia. & square tray of 30x30cms with central hole of 10cm dia. Also other size of 15cm dia. & 20cm dia. are available.

The company is the well-recognized Manufacturer, Exporter & Supplier of durable Bulk Density Apparatus. Our Digital Automatic Tap Density or Bulk Density Test Apparatus is designed to meet the requirements of the USP Standards. It can easily hold two cylinders. Our Bulk Density Apparatus provides a simultaneous rotating and tapping motion to the cylinders for the packing of the sample under test evenly and uniformly together. Made using M.S., the Bulk Density Apparatus is duly powder coated or has S.S. body (as per GMP requirement). Operation : The user has to select the number of stokes in the counter & after selecting, simply press the start button which will start the strokes & the digital display will show the number of strokes.  Cylinder Capacity : 100 ml

GLOW WIRE TEST APPARATUS  is intended for testing the flammability and ignitability of components and materials. This equipment is designed as per requirement of IEC:60695-2-10, IEC:60950-1, IEC:60335-1, IEC:60884-1, IEC:60238, IEC:60695-2-11, IEC:60695-2-12, IEC:60745-1, IEC:60400, IEC 60730-1, IEC:60598-1, IEC:61050, IEC:60320-1, IEC:61058-1, IEC:60742, IEC:60669-1, UL 746A, BS EN 60695-2-1, BS 6458, NF C20-921-1, IS:11000, ASTM D 6194-03 ‘Fire” hazard testing- part – 2 test method section 1, Glow wire test and Guidance.Nickel / Chromium (80: 20) Glow Wire, 4 m.m. in diameter, as per standard. Apparatus Glow Wire Test Apparatus consists of fine wire thermocouple, 0.5 mm diameter Cr/Al OR 1.0 mm Sensing Thermocouple. Sensing Thermocouple is also being supplied as per ASTM D 6194 for measuring the temperature of the Glow Wire. The equipment is simulated thermal stresses that are produced by sources of heat or ignition for short periods. When insulation is subjected to abnormal condition & can become a fire hazard. Fully Automatic Glow Wire Tester Besides the Conventional Glow Wire Test Apparatus a new model with complete automated Glow Wire Tester having touch screen and complete PLC control and monitoring for Time, Flame time, Force, Current and Exhaust time etc is also designed by Sensors India. The testing device consists of a loop of resistance wire, electrically heated to the for high temperature specified for the relevant standards and maintained under specified pressure & time. A PID digital temperature indicator with controller. The range of this control is 1000 Deg C. An auto current source use also provided with a CT operated ammeter, which is capable of delivering up to 150A for heating in loop. Besides that moving specimen holder trolley is pre-loaded with a force of 0.8 to 1.2 N against Glow Wire. Mechanical stopper limits movement of the tip of The Glow Wire in to the specimen to maximum permitted with scale to measure penetration depth. Digital timer for application and flame time adjustable clamp for holding the specimen under test & Scale for measuring flame height is also provided. Our apparatus provides excellent temperature control.

• 5.7: Touch Screen
• 120 Patient Records: Spline Filter

12-channel ECG for printing and recording from 12 leads with colour touch screen Touch screen display 5.7" (120x89mm) showing 3, 4, 6 or 12 leads Screen resolution (dots): 320x240 Combined alphanumeric and functional keyboard and touch screen buttons Indication of contact of each electrode Paper width: 210mm / A4 Paper type: roll, fax or A5 z-folded thermal paper Print type: thermal / external laser or ink printer Direct connection of the ECG to your printer (via USB port, independent of PC, print on A4 office paper) Compatible printers: HP LaserJet HP LJ 1015, HP LJ 1160, HP LJ 1320, HP LJ 3020, HP LJ P2015, HP Color LaserJet HP CLJ 2550 L, HP CLJ 2605, HP CLJ CP1515n, HP CLJ CM1017 MFP, HP OfficeJet HP OJ 6110 (ink), HP OJ Pro L7590 All-in-One (ink), HP OJ Pro K5400 (ink), HP DeskJet HP DJ 6540, HP DJ 6620, HP DJ 6840, HP DJ 6940 Sensitivity: 2.5, 5, 10, 20mm/mV Paper speed: 5, 10, 25, 50mm/s Adaptable mains filter: 50-60Hz Muscle tremor filters: 25, 35Hz Baseline filters: 0.05 (3.2sec), 0.11 (1.5sec), 0.25 (0.6sec), 0.50 (0.3sec), 1.50 (0.1sec), splines Automatic filters: auto-adaptive Printed leads: 3, 4, 6, 12, 3x4+1, 3x4+2, 3x4+3, 4x3+1, 6x2+1, 6x2+2 Storing of 100 ECG records (10-sec long strips) Unlimited number of user-defined profiles Manual and automatic mode Long ECG recording Real time and synchronic transmission in automatic mode Backward ECG recording Defibrillation protection Pacemaker detection Built-in accumulator Mains or battery operation Full ECG analysis and interpretation in words (model with diagnostics) Averaging of ECG curves (model with diagnostics) Connection to PC data management and diagnostic software: BTL-08 Win - optional Connection to cardiac stress-test system: BTL-08 Win Ergo - optional

• Brand Name: ThermoIndia
• Condition: New

We feel proud to introduce themselves as a leading manufacturer, supplier and trader of Laboratory Muffle Furnace 1000 Deg. C. In New Delhi, Delhi, India. * temperature max 1000 °c * working temperature max 900° c. * accuracy ± 1% or better * outer body made by mild steel with epoxy powder coated. * (optional outer body made by stainless steel) * heating from four sides * the furnace can run continuously trouble free. * the furnace is insulated with ceramic fiber blanket of high density for better insulation. * the furnace is quick heating type, light in weight, table mounting type, compact elegant in design. * temperature controlled by digital temperature controller to avoid over heating for long life and trouble free working. * a viewing cap is also provided on the door. * solid state relays provide for low-noise operation * the swing door insulated with ceramic fiber to avoid heat losses from the door. * the control panel is fitted at the top or bottom of the furnace * the apparatus complete with thermocouple, main lead, with power plug. * defined application within the constraints of the operating instructions * to work on 220230volts or 400 440 volts a.c. 3 phase supply. Size : w100 x h100 x d225mm (4x4x9), w125 x h125 x d250mm (5x5x10), w150 x h150 x d300mm (6x6x12), w200 x h200 x d300mm (8x8x12)

• Application: Oral Therapy

• Weight: 2.500kg
• Color: Black And Blue
• Material: M.S Steel Body
• Usage/Application: Cement Tesing
• Accessories: Brass Mould, Needle And Plunger, Glass
• Standard: AS PER IS

The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould. Split type and glass base plate and one set of needles one each initial needles, final