Laboratory Apparatus Dealers in Kirti Nagar, Delhi

Bituminous surfaces exposed to varying temperature conditions undergo expansion & contraction. So an important characteristic of the binder is its ductility & the degree of ductility has an effect on the cracking bituminous surface due to traffic stress.The ductility of bitumen is expressed as the distance in centimeters to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions.

It is used for determining the workability of concrete . Consist of slump cone 20cm bottom dia. & 10cm top dia. With handle, base plate & tamping rod 16mm dia. & 60cm long.

• Application: Oral Therapy

A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia ¼ lb. Wt. 1 no.Final needle 1/24 inch dia. ¼ lb. Wt. 1 no. Glass base plate.Complete as above.

We offer a wide range of laparoscopic instruments which are especially used in surgeries. The different type of laparoscopic manufactured and supplied by us include dissecting forceps, curved scissors, suction and irrigation tube, clips applicator etc.

Acquisition Mode: 12 leads simultaneously A/D Converter: 24 bits Measurement Range: +-5mVp-p Time Constant: >=3.2s Frequency Response: 0.05Hz~150Hz (+0.4dB~ -3dB) Calibration Voltage: 1Mv+-2% Sensitively: Automatic, 1.25\2.5\5.5\ 10\20\40mm/mv (

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

• Brand Name: RIDHI SIDHI
• Color: Silver
• Material: Stainless Steel
• Shape: Round

• Material: Aluminium Die Cast Nut
• Capacity: Flow Capacity – 0 To 700lpm
• Microns: 63 / 74 / 100 / 125 / 149
• Cap: Steel Cap / Support Tube
• Temperature: Max. Working Temp. 80° C
• Use: Suitable For Hydraulic / Mineral Oil

We are stockiest and suppliers of standard suction strainer of branded make of Jacktech / Hydroline / Hydax etc.   We are offering suction strainer filters are designed for installation into high-pressure suction lines of hydraulic pumps. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Construction: suction strainer filters are manufactured using pleated stainless steel mesh screen and rugged steel core centers that are epoxy bonded to heavy gauge less...

• Weight: Approx 1kg
• Capacity: 30 Minutes or 45 Minutes
• Colour: Black
• Temperature: 90 to 1000 Degree
• Diameter: 110 mm to 170 mm
• Feature: Easy to Use

The Specific Heat of nanofluids decreases as nanoparticle concentration increases. The specific Heat of nanofluids increases with temperature. The Specific Heat of nanofluids decreases as nanoparticle concentration increases. The specific Heat of nanofluids increases with temperature. Thus future research are required to measure thermophysical properties of different nanofluids as a function of temperature and concentration. Our Nanofluid specific Heat Apparatus is a good tool for Research and Laboratory experiment for Nanotech Labs. This apparatus is designed to measure Heat Capacity of nanofluids from RT+5°C to 70°C. The apparatus will consist of following parts- 1. Cooling system like fridge available in the lab. Thermally insulated chamber with heating arrangement and Temperature measurement system as per block diagram. 2. Data logger unit for measurement of Time, voltage, current and temperatures at regular intervals.   The power to system will be provided by D.C. power source with specially designed constant current supply to measure power vs temperature rise. The logged table on computer will be displayed as under. Fluid required-250 ml.   A software will automatically log all parameter, i.e. Power, Temperature vs. time at set interval. Heat capacity within temperature range will be displayed on the apparatus. System will be having USB interface where data can be recorded on a pen drive.

We offer kindly contact for pop and gypsum false ceiling and gypsum partition roll forming machines. price : pop set containing: pop cross, pop main, pop angle inclusive of gear box, rot and decoiler. (7+7+5 roll set assembly) gypsum set containing: ceiling section, intermediate channel, perimeter channel, angle inclusive of gear box, de coiler, rot. (roll set assembly 7+5+5+5).

• Application: Hospital, Clinic
• Condition: New
• Weight: 125g
• Feature: Sharp and Clear Trace
• Battery: 12V (1500 mAH) Ni-MH battery
• Dimensions: 285 x 265 x 72 Unit (mm)

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

• Country of Origin: India
• Type: Blood Pressure Model
• Certification: CE Certified
• Application: Blood Pressure Reading
• Color: Creamy, Light White, Off White
• Feature: Accuracy, Easy To Carry, Highly Competitive
• Condition: New
• Automation Grade: Manual

Product Description   Model: MCP01 ISO, CE & ISI Mark, NSIC Approved, WHO GMP Mercurial Sphygmomanometer is traditional blood pressure measuring instruments with mercury locking facility, Range 0-300 mm Hg packed in lightweight metal case. Features Easy to read with clear tube  Accurate reading Emulsoid Bladder & Soft emulsoid Bulb Mercury lock facility. Measure Scope: 0-300mHg Accuracy: 3mmHg Glass Tube: 3.5 to 4.0mm

• Use: Clinical Use
• Measurement: Upper Arm
• Cuff Size: 18-22 cm
• Brand: Derby

• Machine Type: 12 Channel
• Brand Name: Maestros
• Driven Type: Electric
• Color: Grey
• Condition: New
• Voltage: 220V
• Certificate: CE Certified
• Type: Ecg Machine
• Weight: 5-10kg
• Warranty: 1Year
• Country of Origin: India

• Capacity: 5-20 Liters per hour

Complete made of Stainless Steel 304 qlty.