Laser Metal Cutting Machine Dealers in Delhi

• Power Source: Electric
• Automatic Grade: Automatic
• Phase: 3 Phase
• Power: 10Watt
• Application: Industrial
• Power Supply: 3 Phase
• Body Material: MS

HistoryIn 1965, the first Laser cutting machine was manufactured by M/s. Western Electric Engineering Research Center, It used to drill holls in diamond dies.In 1967, the British harnessed the Laser with the help of Co2 for Metal cutting. In early 1970 this process was used to cut Titanium for aerospace application.ProcessLaser beam is generated by simulating a lasing material by electric discharge or lamps within a closed container. As the lasing material is stimulated, the beam is reflected internally by means of partial mirror, until it archives sufficient energy to escape as a stream of coherent light.The parallel rays of coherent light from the Laser source often fall in the range between (1.5-2.0 mm) in diameter. This beam is focused and intensified by a lense or a mirror to a very small spot (0.025 mm) to create a very intense Laser beam.Mirror or fibre optics are used to direct the coherent light to lense, which focuses the light at work zone will the help of different lenses and finally to output Mirror.Solid State YAG LaserA Laser is a device that creates and amplifies a narrow intense beam from coherent Light. This light beam is very intense to vaporize the hardest and the most resistant material. In solid state Laser the active medium is a solid material instead of gas or liquid. The Laser medium is a rod of Yttrium Aluminium Garnet (YAG).Features of YAG Laser Cutting Machine* Solid YAG laser medium is one of the most stable product in Laser field.* It has the features of better Laser mode and thin Cutting Gap.* It is very stable machine with very little periodical maintaince, except changing of Mirror, lenses and Cutting nozzle.* It gives high accuracy and high quality of cutting.* The Servo motors, ball screws, and linear guide rails which are imported not only ensure the good cutting speed, better edge effect, and higher accuracy than similar products, but also ensure the stability and reliability of the machine’s working.* No distortion, negligible thermal input, no secondary operation required.Application of YAG Laser Cutting MachineUsed for precision cutting of Mild Steel, Stainless Steel, Alloy Steel, Spring Steel, Copper and other metals.Widely used for Aerospace, Steamships, Railways, Wagon, Automobile, Textile machinery parts, Elevators, Kitchenware machinery, Electrical parts, Hardware etc.Comparison with Co2 Laser* YAG is specially designed for Metal cutting, where as Co2 is for Metal as well as for non metal like Acrylic, MDF, Wood etc* Operation cost of YAG Laser is just 1/5 to 1/7 times, compare to Co2 Laser cutting machine.*Maintenance cost of YAG Laser is 1/10 to 1/15 times, compare to Co2 Laser cutting machine.Advantages of Laser Cutting Over CNC Plasma Cutting* No Warping even on lower thickness.* Cutting is very precised, as minium line width of Laser beam is 0.2 mm.* No Contamination on the cutting edge.* No heat effect zone.* Laser cutting require less energy for sheet metal cutting.* It can cut hole of as low as 2 mm in diameter

• Automatic Grade: Automatic, Semi-Automatic
• Worktable Size: 1300 x 2500 mm
• Laser Power: 150 W/ 180 W/ 300 W
• Position Accuracy: 0.03 mm
• Cutting Speed: 35 m/min
• Electric Power: 220V/ 50Hz

Applicable materials : Stainless/carbon steel, wood, organic glass, plastic, garments, paper, leather, rubber, and other nonmetal materials. Applicable industries Advertisement, arts and crafts, shoes, toys, computerized embroidery and clipping, garments, model and construction industry.

• Laser Wavelength: 1064nm
• Automatic Grade: Automatic
• Power Source: Electric
• Area of operations: 2500mm x 1300mm
• Thickness: 10mm 
• Frequency: 50 Hz
• Laser power output: 800W
• Model: YC 2513

• Cutting Speed: Depends on Thickness of Material and type of material
• Laser Type: Fiber Laser / CO2 Laser / YAG Laser

our laser cutting machines can be used for all kind of metals like ss, ms, alluminium, copper etc and we supply the machine with all the laser power range for cutting of various thickness i.e. 0.1 mm - 12 mm & more. we also have the options for different cutting bed size like 8'x4', 10'x5' and more. we provide the following laser sources for cutting application : fiber laser co2 laser yag laser

Laser Metal Sheet Cutting Machines, CO2 Laser Tube

• Model: As Per Requirement
• Laser power: 500W、750W、800W（Optional）
• Working area: 3000*1500mm
• Overall power consumption: <12KW
• Transmission mode: gantry driver optional (Gear and Rack Double driver Optional )
• Working voltage (power supply): 380V 50Hz(60Hz)
• Dimension:: 4800*2560*1750mm

Product Features ● Machine structure frame precisely welded by CO2, high-temperature annealing treatment to ensure normally to run without deforming.  ● Imported high precision ball screw transmission and high precision linear guide rail  ● Japanese servo motor and driver system, imported high-rigidly precision gearbox ● Equipped with auto-lubrication device with dust removal and smoke extractor system ● Modular structure laser, High Performance, and free maintenance ● Professional laser cutting software, easy to operate, design all kinds of graphs, texts easily by your will to cut Applicable industry Fiber Laser Cutting Machines are Widely used in wide range of metal products industries for example, sheet metal processing, cookware and lavatory appliance, advertising & signs, lighting & hardware, electrical cabinets, auto parts, machineries & equipments, household appliances, precision parts and many more.

Adopt Advanced Germany Technology Advanced Laser Optical System to Ensure Excellent Laser Beam Quality   Laser Path Pre-view & Pre-position Function Unique Mirrors and Lens Cooling Technology Professional Laser Cutting Software .  

Laser Cutting Machine for Non Metal, Co2 Glass Laser Tube 150w