Level Switches Dealers in Udyog Nagar, Delhi

• Brand Name: LFIA
• Material: Stainless Steel
• Application: Vibrating Levelling
• Certification: CE Certified
• Media Type: Dry Material
• Type: Vibrating Fork Level Limit Switch
• Country of Origin: India
• Fork Material: SS
• Fork Length: Std. : 200mm, upto 3000 mm
• Operating Temperature: 70-150 Deg. C
• Output: 2 C/O SPDT, 5amp, 230V PNP/NPN with DC Mains
• Supply: 230 V AC
• Housing Material: Aluminium, Weather Proof
• Protection: IP 65
• Cable Entry: 2nos. PG16

• Application: Magnetic Use
• Voltage: 200VDC, 230VAC
• Frequency: 50HZ, 60Hz
• Power: 0-5Amp, 10-15Amp, 5-10Amp
• Temperature: 0Dig C To + 60Dig C
• Hole Diameter: 0-20mm, 20-40mm
• Setting Range: 0-1500pF, 1500-3000pF

Malhotra Bros & Co. is a well-known Magnetic Level Switch Manufacturer and Supplier in Delhi. The Magnetic Level Switch goes through several quality-checks, which ensure its top-notch quality. The Magnetic Level Switch is an economical, maintenance free and reliable device used for high, low or intermediate point level switching. The Magnetic Level Switch is for tanks with inaccessible tops or bottoms and where insertion depths of top mounted models are exceeded. Construction & Operation Compact and rugged construction, consisting of a free moving float assembly and a switch enclosure in non-magnetic material to achieve undisturbed magnetic flux. It employs dual magnets- one carried out by the float arm and the other by the contacts carriers, housed in the switch enclosure. A change in the liquid level brings the like poles of the dual magnets opposite to each other, and resulting repulsion force ensures a change-over of contacts, of the switch housing. These Magnetic Level Switches come in various non-magnetic materials and construction styles to suit board range of medias/applications. It is designed to provide high repeatability and to minimize effects of shock, vibration & pressure. Installation Mounted internally or external through a chamber. External mounting is resorted to, where space is a limiting factor or mechanical devices like stirrers operate within the tank. Besides, in applications like boilers, reaction kettles etc., with external mounting, isolation are possible for regular servicing The switch is normally side-mounted; however for applications like slurry, vertical-installation is preferred On no account must a switch be used for the direct starting of burners, heaters, Motor-pumps, alarm, It is essential that the contacts are wired in series with the relay coil (N/V coil) in a contactor starter Applications Manual start & auto off in storage tanks Oil storage tanks to indicate high level, low levels or filling the tanks automatically Condensate receivers to control the operation of an electrically driven condensate pump Main water storage tanks to control the action of the pump used for filling or emptying the tank, automatically In baby boiler auto control of Pump motor & Electric Heater For the control and indication of liquid levels in vessels under vacuum In storage and service tanks on board ship to give indications in the Engine Room when the level in the tank is too high or too low Where a number of level switches are employed they can be supplied together with a suitable indicator and Alarm Panel embodying signal lights and an audible alarm system.