Manoj Cables Limited Shalimar Bagh, Delhi

We are offering railway signaling cable, railway control cable. dazzolite brand railway signalling cables is a well established brand in indian railways for more than 2 decades. Railway signalling cables are manufactured as per irs-s- 63/2007 with latest amendments & railway signalling quad cable manufactured as per irs – tc- 30/2005 with latest amendments. Dazzolite signaling cables are manufactured as per rdso requirement & specifications. Our range of railway cables includes railway u/g quad indoor cables, control & signalling indoor cable, railway u/g quad outdoor cables, control & signalling outdoor cable etc.

We are offering lt power cables. lt power cables with pvc/xlpe insulation for power transmission. Voltage grade 650/1100 volts (uo/u) provided with isi marking is:1554(pt-1),with or without hr/frls properties. Screening can be provided if desired. Conforming to standard specifications like: is 1554 (pt.1),iec 502,bs 6436/87.

We are offering lt control cables. we manufacture lt power & control cables that are used in industries like telecom and electrical. These heavy duty cables are an indispensable part of electrical fittings and cable fixtures and are available in armored and unarmored types.the cables are manufactured in accordance with the is specifications and are suitable for operation for up to 1100 volts. Core identification is useful for distinguishing different colors of the cores like single core red, black, yellow, or blue. Our range of lt power & control cables includes control cable and power cables.

We are offering lt aerial bunched cables. with the growing need for long term economy, safety and reliablity overhead conductors are now being replaced by aerial bunched cables both in l.t. & h.t. Distribution network with limited space for clearance. Aerial bunched cables are basically a compromise between power cables and overhead conductors. aluminum conductor xlpe insulation aluminum (lightning) conductor mesenger the basic construction is as follows: 3 power cores consisting of standard aluminium conductors, insulated with xlpe insulation. one shealth lighting aluminium conductor with xlpe insulation (optional). one messenger al-alloy conductor (base or insulated).

We are offering instrumentation cables. instrumentation cables annealed bare/ uniform coated with tinned/silver platted, high conductivity, and electrolytic grade solid/stranded/flexible conductor. dielectric conductor are insulated with general purpose/hr pvc compound/solid/cellular pe/pp/or any other dielectric material as per customers specification. colour of dielectric :- cores are identified with different type of color scheme as per requirement as below:- i) as per is:1554[pt-i]:88, 694:90. ii) as per iec, itd or number printing. iii) as per customers scheme. pair/triad/quad :- two/three/four cores are uniformly twisted together to form a pair/triad/quad with maximum lay length 80 mm/as per requirement of customer. The lay shall be so chosen as to minimize cross talk in the cable. individual shielding :- if required, individual shielding may be of poly aluminum [thin layer of aluminum foil bonded to polyester film] tape with annealed tinned copper drain wire. It prevents the shorting of adjacent shield and minimizes the cross talk and ground loops. A tinned copper drain wire is installed to provide continuous contact with the shield and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and shield. laying of pairs/triad/quad. :- pair/triad/quad are laid up with suitable lay. The outer most layers are right hand lay and successive layers are laid up with opposite lay. Then, a melinex tape is provided to bind up laid up pair/triad/quad. instrumention cables are used in normal or hazardous area, with or without flame retardant properties, suitable for process control, a/d converters and other modern microprocessor based instrumentation circuits.these cables are designed to offer excellent resistance to noise and induction phenomena encountered in instrumentation circuits.voltage grade 650/1 I oovolts (u0/u). Conforming to standard specifications like is 1554 (pt-i), bs 5308 (pt-i & 2), iec 189 (pt-l&2),vde08l5&08l6etc. Configuration multi-core/multi-pair/multi-quad laid up concentrically or in units. Construction conductor solid/stranded, tinned/bare/silver-plated annealed high conductivity ec grade copper, sizes ranging from 0.5 sq. Mm to 2.5sq.mm. Insulation pvc/ solid pe/ special thermoplastic materials, heat resistant pvc-85°c/105°c operation. Halogen free polymeric or elastomeric insulation can be provided. Core identification by color-coding or printed numerals/letters. Core- wrap one or more plastictape. Screen cores/pairs/quads can be individually or overall screened or both.screening by cu/ai-mylartape or copper braid or aluminium wire for reinforced armour types. Drain wire drain-wire of solid/stranded, bare/tinned copper wire normally provided with both individual and overall screen. Mechanical protection cables can be armoured with galvanized steel wires & strips or double helical steel tape. Inner and outer sheath pvc black/grey. Hr/frls pvc sheathing or halogen free polymeric/elastomeric sheathing also available.

We are offering flexible cables. flexible single / multi core cables manoj cable has developed an extensive range of pvc flexible cables to meet the requirement of customers. “dazzolite” pvc single and multi-core flexible cables make a big difference wherever they are installed. They don't merely deliver power, they do so with maximum efficiency and safety. With standardized material, conductor and insulation, manoj cable has minimized loss while improving electricity transfer. All the products are manufactured as per is: 694:1990. conductor construction : electrolytic grade, high conductivity, solid / stranded / flexible / plain / tinned copper conductor as per is: 694/1990. insulation : the pvc covering over conductor is called insulation and provided by extrusion process. The insulated conductor is called a core. As per is-694 the insulation should be of type - a pvc compound as per is-5831 and it is suitable for 70°c continuous operation. Fr / frls insulation is also provided. sheath : the pvc coating on core and on laid up cores in case of multicore flexible cables is called sheath. As per is-694 it should be of type st-1pvc compound as per is-5831. Cables can be supplied with fr/frls properties also.