Manometers Dealers in Delhi

• Material: Plastic
• Application: Industrial Use
• Color: Grey, Yellow
• Feature: Accuracy, Measure Fast Reading
• Display Type: Digital
• Automatic Grade: Automatic

• Type: Manometers
• Material: Mild Steel, Stainless Steel
• Diameter: 80-100mm
• Application: Industrial Use
• Color: Grey, Silver
• Condition: New
• Display Type: Digital
• Automatic Grade: Automatic
• Pressure: 0-5000psi, 10000-15000psi, 15000-20000psi, 5000-10000psi
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof

• Brand Name: RESQ

Manometer -Made Of Heigh Density Material  

• C.V.P. MANOMETER: WHITE

Suitable for continuous or intermittent monitoring of central venous pressure during infusion, Moulded clamps with latex free rubber strings are provided for easy fixation on the I.V stand.

HYDRONIC DIFFERENTIAL PRESSURE MANOMETER Series 490A Hydronic Differential Pressure Manometer Liquid & Gas Pressure Measurement, ±0.5% FS Accuracy The SERIES 490A Hydronic Differential Pressure Manometers are versatile, handheld, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A new feature added to the Series 490A is a field adjustable damping, which allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications. Hydronic meter kit includes: (2) six foot high-pressure rated tubing with shut off valves, high pressure 3-way valve, 8 ft poly tubing for purges, hard travel case, handheld carrying strap, 116" x 1 12", 18" x 3" and 18" x 1-12" pairs of pressure probes, 90° Flare to 14" NPT fittings, adjustable 8" wrench, PTFE Tape, and magnetic protective rubber boot. NIST Calibration Certificate comes standard. California Residents: Click Here for Proposition 65 WARNING. Product Applications Chiller to coils for freeze protection Hydronic valve balancing Measure pressure drop across pumps Valves to determine valve position

• Diameter: 20-40mm
• Automatic Grade: Automatic
• Pressure: 0-5000psi
• Feature: Accuracy, Measure Fast Reading, Robust Construction, Rust Proof
• Accuracy: +/- 0.5 % of FS
• Test Pressure: 1.5 time of Operating pressure

• Display: Dual LCD
• Features: Gauge/differential pressure, 11 selectable units of measurement, Data hold and backlit, auto power off, low battery indication, High accuracy and sensitivity
• Accuracy: + 0.3% FSO (25 º C)
• Repeatability: +0.2% (Max+/-0.5%FSO)
• Linearity/Hysteresis: +0.29% FSO
• Maximum Pressure: 150psi
• Response Time: 0.5Second.s Typical
• Low Range Indicator: Err.1.
• Under Range Indicator: Err.2.
• Operating Conditions: 32 º F to 122 º CF(0 to 50 º C).
• Storage Conditions: 14 º F to 140 º F (-1 to 60 º CC).

• Material: Metal
• Diameter: 20-40mm
• Application: Industrial Use
• Display Type: Analog
• Pressure: 0-5000psi
• Feature: Accuracy, Easy To Fit, Measure Fast Reading

We are into manufacturing and exporting of Industrial Grade Manometer, which is specially designed to measure pressure. Industrial Grade Manometers offered by us, are manufactured from Aluminum casing from three sides with transparent acrylic front. Moreover, this Industrial Grade Manometer has uniform bore, thick -walled Borosilicate glass and is powder coated. Features : Scale is Aluminum Anodized with PVC/PP/SS304 wetted parts The end connections may be ¼" BSP, ½" BSP OR Nozzle type Mounting available in wall/Panel/Stand type. All manometers are supplied with zero adjusting knob and drain plug Instrument accuracy is better than +/-0.5% of F.S.D.   Specifications U Tube Type Scale Length Resolution 1000 - 0 - 1000 2000 mm 1 mm 750 - 0 - 750 1500 mm 1 mm 600 - 0 - 600 1200 mm 1 mm 500 - 0 - 500 1000 mm 1 mm 400 - 0 - 400 800 mm 1 mm 250 - 0 - 250 500 mm 1 mm 200 - 0 - 200 400 mm 1 mm 150 - 0 - 150 300 mm 1 mm 100 - 0 - 100 200 mm 1 mm Single Limb 0 - 200 200 mm 1 mm 0 - 300 300 mm 1 mm 0 - 500 500 mm 1 mm 0 - 760 760 mm 1 mm 0 - 1000 1000 mm 1 mm 0 - 1500 1500 mm 1 mm 0 - 2000 2000 mm 1 mm

For determining the pressure exerted by the sap flowing from a stem stump. Manometer graduated 0 to 200 x 1mm, for attachment by means of rubber tube or tape to the cut stem of a plant growing vigorously in wet soil.

CVG solid acrylic body portable manometers are fabricated from 1 inch. Thick acrylic plastic solid block, vertially unbreakable stable and free of distortion. PVC plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes provide with manometer. Ranges : 10 mm wg to 200 mm wg.

• Feature: Zero adjustment scale,Available in Acrylic Body

U-Tube Manometers are versatile, economical instruments for the measurement of pressure, vacuums or differential pressures. Pressure measurements are accomplished by balancing a vertical head of indicating fluid with the pressure to be measured. As there are no cams, gears or levers to operate in the manometer, the readings obtained are always accurate.The U Tube Manometer, have “U” shaped tube, half filled with liquid (Water Mercury SP Gr. 0.81). When both the tubes are open, the liquid is at the same height in each leg (Tube Limbs). When positive pressure is applied to one leg which is the sum of the reading above and below zero, tells you the pressure. When vacuum is applied to one leg, the liquid rises in that leg and falls in the other. The difference in the height indicates the amount of vacuum.

Model: MCP BS-08 ISO, CE Mark, WHO GMP       ·      The dial runs from 0 mmHg up to about 300 mmHg. ·   You shouldn’t need numbers much past 200, as even systolic pressures over 180 constitute an emergency. ·     When you look at the dial, make sure it is at the zero base line before starting. ·     If it isn’t, you need to calibrate it using a mercury manometer.   ·      Connect it with a Y connector, and once you move the dial over, check the pressure at several readings on both meters to make sure the aneroid manometer matches the mercury manometer..

Zero adjustment scale Excellent Borosilicate glass tube Accurate readings for differential pressure Industrial grade printed scales

• Range: -1 to +5 mmWc , -1 to +10 mmWc

Inclined Tube Manometer utilize expanded scales for unusual sensitivity for fast, easy reading of low pressures, draft of small differential pressure. Solid acrylic body portable manometers are fabricated from 1" thick, clear acrylic block. Unbreakable, stable and free of distortion, consisting of drilled-in indicating limbs & tanks with high precision & accuracy. An acrylicaluminium scale is provided which is calibrated in the specified range. Mounting: Wall Mounting, Table Mounting Plush Or Panel Mounting Available

• Accuracy: +/- 2 Percent of FS
• Measuring Range: 100 mm H2O
• Connection Type: Nozzle Type
• Tube: Acrylic
• Mounting: Wall
• Manometer Fluid: Red Gauge Oil
• Casing Material: Acrylic
• Working Temperature: Maximum 80 Degree Celsius

With our cutting edge technology, we offer in the market Master Gauge Manometer. The Master Gauge Manometer is widely used for measuring positive and negative and different pressure, flow, vacuum etc. It can be customized as per the specified pressure range. Types : Inclined Tube Manometer Single Limb Well Type Manometer U-Tube Manometer PU Tube (Portable Manometer)

We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss. We have our own storage unit wherein we keep a large stock for meeting urgent and massive requirements of the clients. Laced with modern amenities, this unit keeps the lot free from the damaging factors.   Model No : BHI 690 BHI 725

•  Model:   : LEO2
•  Temperature:  : 0 to 50°C
•  Range: : -1 to 700 bar
•  Battery Life:  : 1000 hours
•  Accuracy:  : ± 0.1% of F.S
•  Output:  : NIL
•  Pressure Range:  : -1…3 bar
•  Resolution:  : 1 mbar
•  Overpressure:  : 10 bar
•  Number of Digits:  : 5 Digit
•  Accuracy RT (room temperature) *:  : < 0,1 %FS
•  Total Error Band (0…50 °C) *:  : < 0,2 %FS
•  Storage- / Operating Temperature:  : -20…70 °C / 0…50 °C
•  Compensated Temperature Range:  : 0…50 °C
•  Supply:  : 3 V battery, type CR 2430
•  Battery Life:  : 1’000 hours continuous operation
•  Pressure Connection:  : 7/16”-20 UNF (adapter G 1/4” included)
•  Protection, CEI 529:  : IP 65
•  Diameter x Height x Depth:  : 59 x 95 x 32 mm
•  Weight:  : 125 g

Digital Manometer (Pressure Meter), Digital Micrometer Head

Manometer, pelvis model, Electric Burner, Laboratory Pumps

Manometer, WBC Pipette, Bunsen Burners, Sims Veginal Dilators - Glass

Single Limb Manometer, Sight Glass Flow Indicators