Material Testing Equipment Dealers in Anand Parbat, Delhi

Riffle Sample Divider is generally used for for sampling aggregates ores refractory materials, pigments powdered coal, soap, cement etc. Riffle Sample Divider Manufactured by us Consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop. 

• Brand Name: Steco
• Material: Steel
• Application: Cement Testing
• Thickness: 0.5 mm
• Pack Type: Box

water bath for le-chatelier testwater bath capable of containing immersed le-chatlier moulds with specimens and of raising their temperature from 27' deg _ 2'deg c to boiling in 27 /- 3 minutes. made of double walled, outer made of crc sheet - powder coated or stainless steel and inside made of stainless steel. gap between the wall filled by glass wool to avoid heat losses. temperature is controlled by sensitive thermostat and temp. read on glass thermometer or digital temp. indicator cum controller with timer programmed to achieve boiling temp. in prescribed time. the bath is suitable to accommodate six moulds at a time. complete with stand to hold le-chatlier moulds in prescribed method. complete with three core wire and 15 amp. three pin top,weighing balance accurate up to 0.1gm measuring cylinder stop watch trowel tray

We keep a stern check while the product is being developed to make sure that we deliver only flawless range. Located in Delhi(India), we ensure safe and secure deliveries, throughout the country, within the agreed time frame. We manufacture Riffle Sample Divider with high grade steel metal to classify materials liek aggregates, sand, rock etc.

It consists of a small split cylinder forming a mould. On either side of the split cylinder. Two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.

It consists of a small split cylinder forming a mould on either side of the split cylinder, two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and lead weight.

• Certification: ISO-9001:2008
• Power: Manual
• Usage: cement Le Chatelier mould for expansion test
• ProductType: Le Chatelier Mould
• Packaging Type: Corrugated Box

• Voltage: 220V
• Features: Easy to operate , Requires minimum maintenance , Longer functional life
• Capacity: 300 inch lbs
• Motor: 0.5 H.P, 3 Phase A.C.
• Speed: 2850 rpm
• Length: 55”
• Width: 25“

Product Code: EKE 400Standrad: IS:5514   It consists of a small split cylinder forming a mould 30 mm internal dia. and 30 mm high. On either side of the split cylinder, two parallel indicating arms with pointed ends are fixed.   Two loops of suitable material and strength soldered to the upper half of the mould on each side of the central split is provided to facilitate demoulding of the hardened paste specimen after test. The resilience of the mould shall be such that the action of a mass of 300g applied shall increase the distance between the indicator ends of the needle by 17.5mm ± 2.5mm without permanent deformation. The mould is supplied complete with two glass plates and lead weight.

We offer portable surface roughness tester. These are packed with powerful functions for convenient operations. Powerful functions and ease at on-site measurements. All functions for convenient operations complies with major international standards such as iso, din,cnomo,jis,asme data memorybattery operation : ten complete data records can be stored. Rechargeable battery operation provides versatile us of the line independent of the line supply. measuring in different positions: the small and light handy surf measures not only flat, horizontal, but also vertical and overhead surfaces. direct data transfer to the pc- the rs 232 serial interface is used to transfer measured data,parameters and profile curves directly to the pc. specifications: measuring range: z axis +- 160 um, x axis 12.5 mm resolution : 0.01 um standards: jis 2001, jis-1994,jis 1982,iso-1984,din-1990,asme-1995,cnomo parameters: pt, ra, rq, rz, rzmax, rp, rt, r3z, rsm, pc, rk, rpk, rvk, mr1, mr2, vo, k, rmr, r, rx, ar, w, wx, aw, wte evaluation curves: section profile curve,roughness curve,iso 13565.

Riffle Sample Divider, IZOD IMPACT TESTING MACHINE

Material Testing Machines, Mortar Mixer, Vibrating table, Beam Moulds

We deals in supplying of wide range of Rubber Hardness Tester.

Material Testing Machines, erichsen testing machines

Material Testing Machine, laborating testing machine, Testing Equipment

Fatigue Testing Machine, subsonic wind tunnel, Colour Matching Cabinet

Material Testing Machines, scientific testing machines, Testing Equipment

Petroleum & Paint Testing Equipment, automatic soil compactor

Material Testing Equipment, Scientific Instruments, Survey Equipment