Back Back
gsm testing machine
Get Price Quote
Owing to our industrial expertise accumulated over time, we have established ourselves as a leading Manufacturer, Exporter & Supplier in the industry. We offer GSM Testing Machine to our esteemed customers at attractive price. GSM Round Cutter boasts striking features such as light weight, strong built and durability. GSM Balance is used for determining GSM of knitted, woven and non-woven fabrics. It is also ideal for preparation of the sample for calculating the GSM (Gram per Square) of fabric. Specifications Vgotech Gsm Round Cutter With lock system for total safety. with 4Nos Imported Blades and 2Nos. Rubber Pads Vgotech Gsm Round CutterSpecimen Area : 100 Cm2 Specimen Diameter : 113 Mm (Approx) Type Of Cut : Standard [GSM = Specimen Weight in Grams x 100] Vgotech GSM Cut & Fit Cutter Standard Model (Wheel Model ) Pad & Blades are not required. SAY No requirement of GSM Pad and Blade Pay back period 3 – 6 Months Hold Complete Grip on the Fabric with minimal efforts 3 Nos. Imported Metal cutting Wheels perfectly synchronized to get precise 100cm2 Cut & Long Life. With a smooth rotation the GSM sample will be cut. Can be used for Woven, Non Woven or Knitted fabrics, Film, Carpet, Foam Paper and Board Features : Area of Circle : Pie X Redius2 = 22/7 X 5.64 X 5.64 = 3.14 X 5.64 X 5.64 = 100cm2 GSM Balance (Electronic Weighing Balance) Model No. - EK01 Capacity - 600gm
25mm Riffle Sample Divider
Get Price Quote
1 Piece (MOQ)
Best Deals from Material Testing Equipment
Riffle Sample Divider
Get Price Quote
1 Piece (MOQ)
Riffle sampler divider, (Close body) We are offering a wide range of Riffle Sample Divider. Riffle sample dividers are used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates. Slot width 12.5/13mm nos of slot 14: Rs.7500/- Slot width 15mm nos of slot 14: Rs.8500/- Slot width 20mm nos of slot 14: Rs.9500/- Slot width 25mm nos of slot 14: Rs.10500/- Slot width 50mm nos of slot 8: Rs.12500/-
Le Chatelier Mould
Get Price Quote
We are one of the well known Manufacturers and Suppliers of Le-Chatelier Mould, which has been fabricated in accordance with IS: 5514. We produce these Le-Chatelier Moulds using excellent quality raw materials to ensure durability. The Le-Chatelier Mould is used for soundness test of cement. Major Components The apparatus comprises of a small split cylinder thereby making a mould of 30mm internal dia. and 30mm high. On both side of the split cylinder, two parallel indicating arms having pointed ends that are fixed. Further, the mould is supplied with lead weight and two glass plates. A set of six molds is offered in a cardboard box with the unit.
Fatigue Testing Machine
Get Price Quote
1 Piece(s) (MOQ)
We are offering fatigue testing machine. analog & digital
Material Testing Equipment
Get Price Quote
We bring forth a diverse range of optimum quality Material Testing Equipment which is fabricated using high grade metals and by employing advanced technological methods. Utilized for the purpose of testing the various physical properties of different materials, our Construction Material Testing Equipment comprise of Spring Testing Machine, Pendulum Impact Tester, Izod Charpy Testing Machine, Tensile Testing Machine, Universal Testing Machine, Torsion Testing Machine for Rod or wire, Bursting Strength Tester, Hardness Tester, Flex Tester and Abrasion Tester. Aiding in quality assessment, product development as well as other research activities, our Universal Material Testing Equipment is used for testing Rubber, Plastic, Footwear, Leather, Paper and Petroleum products. We are engaged in manufacturing equipments both in standard as well as per customer’s special requirement. This has made us one of the prominent Manufacturers in our domain.
Le Chatelier Mould
1 - 1,600 Per Piece
10 Piece (MOQ)
IS-4031.With two glass plates and lead a transparent disc is screwed. The division of the scale on the rod weights. For indicating soundness of cement and limes. A brass cylinder mould split down one side and provided with two parallel indication arms.
Riffle Sample Divider
Get Price Quote
Used for sampling aggregates ores refr actory materials, pigments powdered coal, soap, cement etc. Salient Features Specifications : It consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. 13 mm 14 Chutes 25 mm 16 Chutes 38 mm 12 Chutes 50 mm 12 Chutes 63 mm 12 Chutes
Irhd Rubber Hardness Tester
Get Price Quote
First specimen to come in contact, first with the pressure foot and later with the indenting tip under the specified contact load. Further movement of the platform causes the indenting load to act on the test specimen. Penetration of the indenting tip into the test specimen is determined with the help of a dial gauge fitted at the top of the pressure foot assembly. The contact between the dial gauge and the top of the plunger rod is made through an electrical arrangement to ensure that the weight of the stem of the dial gauge does not act on the test specimen. An electric buzzer is provided to slight vibrations to the plunger rod to eliminate friction. The dial gauge gives the depth of indentation in units of 0.01 mm which can be converted into IRHD hardness value.
surface resistivity tester
19,500 Per Piece
1 Piece (MOQ)
standard compaction test
Get Price Quote
Laser Surface Profilometer
Get Price Quote
Serving the clientele with finest assortment of products, we are a high-flying organization operating from New Delhi(India). We are the most promising name when it comes to Laser Surface Profilometer.
Flexo Meter
Get Price Quote
The flexometer is the internationally-accepted method for the assessment of the flexing endurance of light leathers and their surface finishes. The tendency for cracks to form in the creases caused by walking can also be determined. The Bally flexer has a different flexing mechanism to the vamp flexer and is complementary to it. It is also used to precondition samples prior to determining water vapour permeability - particularly in assessing uppers for protective footwear. The Ability of light leathers and leather–cloth used in manufacture of shoe uppers. Gloves, and garments to withstand repeated flexing without cracking is determined with the help of a flexing endurance test in this test specimens in shape of rectangular pieces are folded and clamped at each end to maintain them in a folded position in a set of grip s, one of which is fixed while the other is able to oscillate. The movement of the oscillating grip causes the fold in the test specimen to run along its center. This operation is carried out repeatedly and the test specimens inspected periodically to assess the damage produced. The equipment used for this is called as Flex-o-meter. Core advantages: The twelve stations are conveniently arranged for user access and the mounting of samples. A predetermined counter is fitted to the machine, allowing it to be operated without continuous attendance as the machine stops automatically once the set count is reached. Relevant Specification IS 5914-1970 : Methods of physical testing of leather , LP19: Flexing endurance IUP/20-1963 : Official methods of international union of leather chemist Society IS 15298 (Part – 1) : 2002 , ISO: 8782 – 1 : 1998 EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351 Dauer-Faltverhalten, UNE/I.U.P.20
Le Chatelier Mould
850 - 950 Per 1
Cement of good quality does not contain the impurities like free lime, magnesia and sulphates, so this should be checked before use. When it contains the impurities named above, it can expand after reacted with the water, which will result in the unwanted results like, cracking, unwanted expansion of the dimensions and lower strength. Le-Ch-atelier's Apparatus is the standard apparatus prescribed as per IS:5514 -1969 to check the presence of the impurities in cement. Cement is said to be sound when the expansion is below 10 mm.
ndt equipment
Get Price Quote
Bluesteel Make Rubber Hardness Tester
5,800 Per Piece
1 Piece (MOQ)
geotechnical equipment
Get Price Quote
GGPL also offers services for ground improvementslope protection work. The ground improvement slope protection work is performed either for natural landslide or manmade vertical steep excavation for underground basement work, where there is no space for excavation in stabilized slope. Such services are performed using appropriate techniques like SoilRock Nailing, Piling, Shotcreting and Grouting.
standard compaction test
2,500 - 4,500 Per Piece
Standard proctor and mould
Corona Dyne Test surface tension tester
450 - 550 Per Nos
10 Piece (MOQ)
Treetment Checking pen And surface tension tester
gsm testing machine
2,900 Per Piece
gsm testing machine
7,200 Per Piece
1 Piece (MOQ)
Fatigue Testing Machine
55,000 Per Piece
Riffle Sample Divider
Get Price Quote
We keep a stern check while the product is being developed to make sure that we deliver only flawless range. Located in Delhi(India), we ensure safe and secure deliveries, throughout the country, within the agreed time frame. We manufacture Riffle Sample Divider with high grade steel metal to classify materials liek aggregates, sand, rock etc.
Sample Riffle Divider
Get Price Quote
Material Testing Equipment
Get Price Quote
Flexo Meter
70,000 Per Piece
1 Piece(s) (MOQ)
Fatigue Testing Machine
Get Price Quote
For metals: Reverse Bending, supplied complete with jigs and fixtures mounted anelegant table with motor, weights, etc. An electronic Digital Revolution Counter registers the number of revolutions taken by the sample to break. The machine automatically stops after the rupture of the specimen
Material Testing Equipment
65,000 Per Piece
Riffle Sample Dividers
Get Price Quote
Riffle sample dividers are used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm up to a maximum of 10 mm. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers. It is fitted with a series of channels or slots of equal width that discharge the material alternatively in opposite directions into separate pans.
Rubber Hardness Tester
3,900 Per Piece
1 Piece (MOQ)
Filter by Localities
