Metal Testing Equipment Dealers in Rajendra Place, Delhi

Torsion Testing Machine is a simple and accurate way for conducting torsion and twist tests on various materials. Clients from all over the world prefer our machine for its excellent testing methods and various customized functions. We stand as a distinguished Manufacturer, Supplier and Exporter of Torsion Testing Machine from Delhi, India. Features : Unique "Talon -Claw" Grips for Round and flat specimens (optional at extra cost) Torsional Speed of 0.1/0.2 RPM (optional at extra cost) Torque Compensated Motors Maintenance Free gear Box Auto Range selection with Range selector wheel (optional at extra cost) 3 or 4 Torque Ranges for higher Accuracy (optional at extra cost) Highlights : Designed for conducting torsion and twist tests on various materials Torque measurement is by an electronic torque transducer for direct display of torque Torque is applied to specimen by geared motor through gear box The accuracy of the torque indication is ±1% of the true torque The complete system is hydraulically damped for vibration free loading. Able to retrieve or print testing results after the test Mainly suitable for materials labs of scientific research, department, Colleges or universities and industrial enterprises to test the mechanical properties under torsion condition   Main applications : Testing machine is used for the torsion test for all kinds of materials, by imposing a torque. There are two testing methods: Automatic Testing : Turn the hand wheel until the test rod breaks. The testing machine will automatically test the yield M1 and the maximum torque M2. Manual testing : Choose the test angles and tropes of any 9 points during the testing period and records them. Main Technical Specification : Max. test torque : (N.m) 200 Min. reading of torque : (n.m) 0.02 Torque measurement angle : (N.m) 20-200 Max. reading of torsion angle : 9999.95 Min. reading of torsion angle : (o) 0.5 Relative error of torque indications

Main Application:This testing machine uses computer controlled japanese AC servo system and is loaded through the active clamping head driven by the AC servo motor and cycloidal pinwheel redution motor.The torque and torsion angle are measured with high precision torque transducer and photoelectric encoder.computer will dynamically display the test torsion curve,loading speed peak value and so on.It is mainly used for the torsion test of mental and non mental materisls as well as the torsion test for parts and components.. It is an essential instrument to measure torsion properties of materials for mechanic laboratories of aviation industry.construction industry scientific resarch dept universities or industrial enterprises.Main Functions and Features Loading mode :- we use imorted AC servo motor and driver testing of torque and torsion angle High precision symmetrical torque transducer for torque testing and high precision photoelectric encoder for angle testing Operation :- Manual control and computer control WINDOWS based software to calculate mechanical indexes of materials.Auto process test data Dynamically display testing curve,store andd print the testing results. Operator can intervene in the analysis process and thus improve the accuracy of test results.

We are offering metal testing equipments.

Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by pendulum dyanometer system. Torque ranges can be adjusted by auto torque selector. Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist.

• Brand Name: Steco
• Capacity: 0 to 50 kgm
• Rod to Be Tested: 8 to 20 Mm
• Load of Measurement: Torque and Twist will be read directly
• Other Provisions: Automatic Stop in Case of Failure of Specimen

Automatic metallography specimen mounting press is a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.   Technical specifications: Diameter of specimen: Ø25mm, Ø30mm, Ø40mm, Ø50mm 2. Power supply: 220V, 50Hz 3. Max. power consumption: 1800W 4. Setting range of system pressure intensity: 0-2MPa (corresponding preparing pressure intensity: 0-72MPa) 5. Temperature setting range: 0-300 ºC 6. Heat preserving time: 0-99m99s 7. Dimensions: 615 × 510 × 500 cm 8. Net weight: 110Kg 9. Cooling method: water cooling

We at Veekay Industries, offers you the best quality Erichsen Cupping Testing Machine. Our Erichsen Cupping Testing Machine is highly capable of undertaking cupping tests on metals. Our Erichsen Cupping Testing Machine is manually operated and gives the output very promptly and accurately because of the fitted clamps. In addition, we are the reliable Manufacturer, Exporter and Supplier of Erichsen Cupping Testing Machine, based in New Delhi, India.   Technical Specifications Least count : 0.01 mmNet weight (approx) : 20 kgWidth of sample : 70-90 mmThickness of sample : 0.1-2 mmOverall Dimensions (approx) : 450x500x500 mm

• Power Type: Electric
• Automatic Grade: Automatic

• Power: 220 V 50 Hz
• Features: Cost-effective,Highly durable,Optimality,High performance,Seamless finish,Competitive price
• Pattern specimen: 25 mm, 30 mm, 40 mm, 50 mm
• Maximum consumption: 1800 W
• Out line dimension: 615 x 510 x 500 mm
• Weight: 100 Kg
• Cooling: Water cooling

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

KEWIL Tensile Testing Machine Tensile Testing Machines for universal application, in substantial two column construction, especially designed for metallurgical and research laboratories.

We manufacture, Exporter & supplier of Torsion Testing Machine. We manufacture Torsion Testing Machine as per the set industry Standards. Torsion testing machine is designed for conducting torsion and twist tests on various metal wires, tubes and steel materials.

IZOD IMPACT TESTING MACHINE, TENSILE BRIQUETTE TESTING MACHINE

Erichsen Cupping Testing Machine, subsonic wind tunnel

Laser Marker

xrf gold testing machine, portable gold testing machine

Optical Emission Spectrometer, Automatic Spectro Polishing Machine

Wax Injector Machines, cad cam software, CCTV Cameras, DVR Systems

computerized engraving machine, Engraving Machine

laser marker machine

metal testing equipment

portable gold testing machine

metal testing equipment, automatic soil compactor