Moisture Instruments Dealers in Delhi

Moisture content of soil is generally measured as a ratio of the weight of water to the weight of solids, expressed in percentage. As soil behavior depends on its moisture content, it is one of the basic parameters defining the soil condition. The 'Moisture' content of soil, can be obtained quickly with reasonable accuracy by using a Speedy Moisture Meter. The test technique is based on the fact that water will react with calcium carbide to form acetylene gas. The quantity of acetylene gas produced is indicated on a built- in pressure gauge. A conversation formula gives the corresponding moisture content based on dry weight. Each soil test equipment is supplied complete in a wooden carrying case consisting of pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge in percentage moisture content 0- 25% or 0-50% on the wet weight basis (6 gm) counter poised balance for weighing samples, scoop for measuring calcium carbide, bottle of calcium carbide (500gm), a set of 4 steel balls and a cleaning brush. Specifications :ENTEK-028 Rapid Moisture Meter, IS: 2720 (P-II), IS: 12175. BS 812,ASTM D4944 AASHTO T217 Consists of counterpoised balance for weighing the sample, scoop for Measuring carbide reagent, A set of steel balls, Calcium carbide reagent 500 gram bottle & a cleaning brush in a nice wooden carrying case. 0-25% or 0-50%.   ENTEK-029 In-fra red Moisture meter, IS: 2720 (P-II). Cap 5 gram approx. Cap. 5 gram approx., Sen: 10 mg approx. Range: 0-100% moisture. Content on wet weight basis. Reading accuracy: +_ 0.25%. It is portable. Supplied complete with one In-fra red Lamp and L shaped thermometer. 220V, 1 Ph, 50 cycles, AC supply.

• Type: Grain Moisture Meter
• Certification: CE Certified, ISO 9001:2008
• Voltage: 3-6VDC, 6-9VDC
• Display Type: Digital
• Automatic Grade: Automatic
• Body Material: Aluminum, Brass, Copper, Plastic
• Power Source: Battery
• Weight: 0-250 gm, 250-500
• Warranty: 1 yr, 2 yrs, 5 yrs

Using a speedy moisture meter, the moisture content of soils, sand and other fine-grained material can be obtained quickly with reasonable accuracy. The test technique is based on the fact that water will react with calcium carbide to form acetylene gas and the quantity of gas formed is directly proportional to the water present, leaving a surplus of the chemical used in the test. The quantity of acetylene gas produced is indicated on a built-in pressure gauge, which is calibrated in percentage of moisture on wet weight basis.   Speedy Moisture Meter Range: 0 - 25%, Accuracy Division: 1% Speedy Moisture Meter Range: 0 - 50%, Accuracy Division: 1%

• Type: Slim Type
• Application: Clinical Use, Hospital Use
• Installation: Manual
• Watch Type: Long Double Die Watch
• Feature: Light Weight

We make sure  our products are produced using top grade materials sourced from reliable vendors only. The offered array of products is examined on the basis of quality of raw material and other inputs used for the manufacturing. Rest assured us for the raw material used, as we have most updated technologies to examine the quality.   Details : Meets  - IS - 2720 (Part 2) - 1973 IS - 12175-1987 Speedy Moisture Meter Range - 0 - 25%, Accuracy Division - 1% Speedy Moisture MeterRange - 0 - 50%, Accuracy Division - 1% Each instrument is supplied complete in a carrying case fitted with counterpoised balance for weighing the sample, Scoop for measuring carbide reagent, a set of steel balls and a cleaning brush. Extra Calcium Carbide Reagent, in a container of 500 gm

• Type: Air Quality Monitors
• Application: Industrial Use
• Color: Black
• Condition: New
• Warranty: 6 Months
• Country of Origin: India
• Color: Black
• DrivenType: Battery

• Application: Laboratory, Industrial
• Frequency: 50 Hz
• Input Voltage: 220 Volt 50 Hz
• Readability: 0.2%
• Finish: Powder Coated
• Temperature: 40-199℃
• Capacities: 25gm, 10gm, 50gm.

We bring forward high precision Infrared Moisture Balance for the clients in domestic as well as international fronts. The Infrared Moisture Balance manufactured by us is largely used for laboratory purposes. Our Infrared Moisture Balance is widely acknowledged by the clients for its performance and cost effectiveness. Attributes Accuracy Advanced infrared technology User friendliness Durability

• Type: Moisture Meter
• Certification: CE Certified
• Weight: 300-400gm, 400-500g
• Color: Available in Many Colors
• Application: Moisture Measurement
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic

The definitive general purpose molsture meter for builcllng surveying, timber inspection and a very broad range oi other applitions. The Mini moisture meter series has been the choice for theusands of users across the world for more than 30 years. The enduring popularity and success oi these instruments is attributable to their versetilly, simple design. robust on-nslructinn and ease of use.Typical users include: Wood product manufacturers and lraders Carpet manufacturer Cormgated box manufaciurer Jute bags manuiaclurer Packing industlies Mini & Digital Mini Protimeter Moisture MetersThe definitive gemerai purpose moisture meters for building surveying, timber inspeciton and very broad range of other applications such as corrugated boxes and carpet etc.

• Country of Origin: India
• Type: Automatic
• Certification: ISI Certified
• Application: Industrial Use
• Power Source: Electric
• Warrenty: 1 Year

For quick determination of moisture content of materials in powder from i.e. soil sand, coal, pottery, ganister, cement etc. A weighed quantity of the substance under test is placed in the body of the tester together with a measured quantity of absorbent and the tester is then sealed and shaken vigorously thereby bringing the sample and the absorbent into intimate contact. The pressure of gas liberated by interaction of moisture in the sample and absorbent actuates the gauge which is directly graduated in percentage moisture on the wet weight basis. A conversion chart is provided for converting percentage moisture content on the wet weight basis to percentage moisture on the dry weight basis.The unit consists of a pressure vessel with clamp for sealing cap rubber sealing gasket, dial gauge calibrated in percentage moisture content to 25 % on the wet weight basis, counter poised balance for weighing sample, scoop for measuring absorbent, bottle of absorbent, cleaning brush.Complete in wooden carrying case with handle.The Unit can be used to determine percentage moisture contents on the wet weight basis up to 25% which is equal to 33.3% moisture content on the dry weight basis.

• Model: TDR 300

Designed for quick and easy measuring. Monitor and record soil moisture accurately with TDR technology and Spectrum's GPS-compatible data logging equipment, Records 3,250 measurements.

Detail description : rtek instruments multifunctional grain moisture meter is engaged in producing and providing a wide range of measuring instruments that are available in varied sizes, shapes and specification to suits the various requirements of our valued customers. These are perfectly designed as per the various industrial requirements. Technical specification : rtek instruments product names multifunctional grain moisture meter measuring mode needle type way of calibration automatic calibration at startup operating conditions temperature: -10°c-60°c humidity: 0-70%rh measuring range for moisture 2%-31% tolerance ± (1%rh+0.5), ±2°c (±4ºf) resolution 0.50%, 1°c (2ºf) measuring range for temperature -10°c-60°c (14ºf--140ºf) power supply 4x 1.5v aaa (um-4) battery size of handle host165×58×33mm, handle380×42×27mm weight host 90g (without battery); handle180g features technology of micro-computer ensures precision; auto temperature compensation lowers the influence of temperature drift on precision; large-sized lcd screen with backlight illumination and unambiguous reading; backlight turned on and off smoothly to save power; prompt for lower voltage; machine turned off when there is no operation after 5 minutes; good appearance and high-quality electronic parts; shell made of durable abs plastics. application applicable to rapidly and precisely measuring the moisture and temperature of grain during allocation and transfer, requisition by purchase, store and process etc. Of the packaged grain. rtek instruments enlarge view rtek instruments request a quote.

• • Capacity : 120 g• Reading unit : 1 mg: • Capacity : 120 g
• • Humidity Readout Precision : 1% (sample 0,02÷0,5g) 0,1% (sample 0,5÷5g) 0,01% (sample >5g): • Humidity Measurement Repeatability :+/- 0,1% (sample 2g)+/- 0,04% (sample 5g)
• • Working Temperature : 1-180 s: • Drying Temperature :50 g
• • Sampling Time : 0.001 %: • Device Weight :3,9 kg
• • Pan Size : Dia 90 mm: • Dimensions :380x480x340 mm

Features :   Moisture analyzers is used for quick and precise determination of material humidity upon the basis of weight loss during drying of its small sample Halogen radiators ensure efective sample drying

Owing to our rich domain expertise, we have been able to offer optimum quality Laboratory Scales at nominal prices. These scales of unparalleled quality are manufactured with intense care under the supervision of skilled professionals at our vendor’s end. Offered scales are appreciated around the nation for their easy to read VFD display, accurate measurement and a longer functional life.

Timely delivery is our forte as we have up-to-date transit facilities and logistic services. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit. Our Rapid Moisture Meter has excellent dimensional accuracy for high resistance against any mechanical impacts. 

• Accuracy: 0.2% By Direct Reading & 0.1% By Estimation.
• Parameters: Values
• Capacity: 5gm,10gm, 25gm, 50gm.
• Electric Supply Work On: 220/230 Volts, 50/60 Hz AC

The infra red moisture balance is used to determine the moisture content in sample present in different weights like 5gm, 10gm, 25gm, 50gm