Muskaan Safety Solutions Pvt. Ltd. Jangpura, Delhi

Lane delineation, diversion of traffic etc. Sidewalk detour Sports, crowd control etc Parking lots Terminals - ferry, freight, airport Toll booths Police and other security purpose Temporary hazards, Closures Traffic Barricades Portable plastic traffic barricades are more effective, safe and stable than drums, posts, cones and other types of temporary barricades. High visibility alerts drivers to safety hazards ahead. It can be aligned in a straight or in twisting roads. Linear design makes a positive visual separation between vehicles, bicycles and pedestrians. Custom sianage and flashers can be easily attatched on it.   Traffic Barricades Application Lane delineation, diversion of traffic etc. Sidewalk detour Sports, crowd control etc Parking lots Terminals - ferry, freight, airport Toll booths Police and other security purpose Temporary hazards, closurs Joiner is to join two (Barricade Da 817) with each other

The Safety Light is an essential piece of equipment for police firefighters and rescue teams. This compact light emits 362 degrees of ultra bright light from an array of 163 LEDs, visible for up to 10 miles away. It is waterproof and so tough that a vehicle can be easily run over it.The safety light has 10 flash patterns and it runs up to 100 hours on the replaceable batteries.

Made of special Pliant material, it can quickly restore to its original state without damaging the vehicle and itself in case of a high-speed collision. Highly reflective heat transfer sheet is pasted on specially designed grooves, make it highly visible from distance at night or in bad weather.

New Spring Post has in- built circular Upper Portion to Highly Reflective PC (Poly Carbonate) Reflector/ Highly Reflective circle of reflective tape of 100mm dia. Highly Flexible re-boundable New Spring post is made out of special flexible material PU (Poly Urethane). No damage to the post and no damage to the vehicle even after severe Hits. It rebounds to its original shape. Two highly Reflective Tape bands are provided to enhance the night time visibility for fast moving vehicles. Circular Reflector/ Reflective Tape fitted on the upper portion works as delineator to guide the vehicular traffic from a long distance. Excellent mechanical and chemical composition to withstand impact strength in severe hot and cold conditions. UV stabilized for color durability. Color does not get faded even after years. 3 Nos. In built holes for fixing of the spring post with nails. It does not deviate by strong hitting impact after installation. Made of special Pliant material, it can quickly restore to its original state without damaging the vehicle and itself in case of a high-speed collision.Highly reflective heat transfer sheet is pasted on specially designed grooves, make it highly visible from distance at night or in bad weather.Its tensile strength and UV stabilizers enables it withstand the harshest of weather conditions. It is easy to install with a epoxy and other strong adhesives without damage to roads or bridges.   Usage Areas: Center Lane Dividing for narrow roads Multi lanes for broad roads Sharp Curves Traffic Islands At the start of central verge (where single road becomes double road) No Stop Zone at T Shape road traffic signals Parking lots Construction Zones No Entry Zone Dangerous medians and 'U' Turn etc. Usage Installation Procedure: Clean the area where spring post is to be installed. Mark the nail points, grout the holes and clean the surface again. Pour some good quality of epoxy then place the spring post and fix the bolts with hammer.  Dimensions: A - 77 MM DIA  |  B - 80 MM  |  C - 975 MM  |  D - 200 MM  |  E - 440 MM DIA  |  Weight: 2300 gms

 MODEL NO: DA 1001 . Speed Bump 3" HeightDesign Patent No. 211500 Made of Sturdy Plastic, Dark Eye speed bumps are high resistance to severe impacts and harsh weather conditions. Its dovetail interlocking subunits make it bind perfectly into a one firm bump. The pre-colored material (Black/Yellow) and UV stabilizers keep them perpetually colorful, Studded with reflectors on either side, they are clearly visible to the motorists during night hours. These bumps are ideal for private colonies, hospitals, schools, colleges, universities, security check posts, parking areas, loading sites, etc.

Made of sturdy plastic, dark eye speed bumps are high resistance to severe impacts and harsh weather conditions. Its dovetail interlocking subunits make it bind perfectly into a one firm bump.

Key Features:Environment friendly Lithium iron battery with more than 2000 charge & discharge circles.Round & smooth surface design not only looks elegant, but also can relieve the impact of vehicles.Special designed with aluminum shell Against subsidence design, preventing the stud from being lower than the ground and losing its effect.    

Power Supply : Mono Crystalline Solar Cell (5V 60MA)

Weight : 950g approx

Safety light bar has been designed with electronic chip, equipped with rechargeable battery. Four way micro switch is used for flashing red, green & White light. The body of light bar is made of polycarbonate material. Florescent cast Vinyl film is used inside the bar to emit highly visible signals.

  MODEL NO: DA 605 Safety Cross Belts Reflective Tape Colours - White or LemonHeat Reflective Tape - 3M

  MODEL NO: DA 601 Reflective Safety Jackets Colours - Orange, Red or GreenHeat Reflective Tape - 3M

  MODEL NO: DA52 Road Stud Two way / One way reflectiveDimensions : 100 x 100 x 20mmPlastic Body Reflective panel Amber, Red or White

Road safety cones meet world-class quality standards. Made up of high quality Flexible plastic, using UV stabilizers, these cones remain constant in all weather conditions. Their bright hues make them visible from distance.Fitted with highly reflective sleeve, these cones can be used for traffic monitoring. Quite versatile, these Cones are compatible with various types of road safety accessories such as barricade tape, Plastic chain, safety light bar, message plates, Flags etc.Provided with In built heavy rubber base at the bottom, these cones remain intact in heavy wind pressure.   Main Features: 950 MM Height Use With Other Accessories Like Light Bar, Reflector, Message Plat Improved Designed Heavy Base

Main features: 950 mm height use with other accessories like light bar, reflector, message plat improved designed heavy base.

Reflectors are skillfully designed to give the maximum reflection and enhance visibility of vehicles during night or bad light conditions. The high reflection gives the drivers early warning. The reflectors are fixed to the base plate using ultrasonic welding method which protects the inner reflecting surface from dust, water and humidity giving them long life. They never get discoloured because of the UV stabilizer user in their making, Available in different sizes, these reflectors can be used on rear and front side of all types of vehicles, road barriers and roadsides etc.

Reflector lense is made of PMMA, bottom & top cover is made of PP material. Weight of road lamp is 760 gms (without battery)Security key is provided to switch on / off, blink or steady the flash lamp. It is also use to install \ uninstall the road lamp on any type of construction site, hence making it vandalism proof.Road Lamps are widely used road safety devices. It services caution signals to the motorists and pedestrians to avoid accidents during road construction, vehicle break down, at sharp curves on highways etc.Fully charged battery keeps it blinking for five consecutive days. Light sensor diodes switches off the lamp automatically during the daytime. Its durable and shock proof battery box, built-in automatic light sensor switch, rust-free body, security key feature and portability make it last long.

model no: da 607 reflective gloves colour - orange, red or greenheat reflective tape - 3m .

Material : Plastic

Height : 750 mm

Material : Plastic

Color : Yellow, Blue, Red, Green, White

Technical Specifications Led -3w Powerful Black Color Weight – 740 gms Approx Range 300m Approx Rechargeable Maint. Free battery In built Battery charger Input Voltage 220 Water Resistant 3 Step Light 8 to 12 hrs continues Operation Charging Time 14 hrs Approx Adjustable Shoulder Strap 

model no: da 962 industrial safety helmets industrial safety helmets are moulded in hdpe plastic material. Fully adjustable six point harness and sweatband is provided at inner side.it is very comfortable and useful for the people working at construction sites, mines, factories etc.available in different colors.

Capacity: 12V, 8Ah Lead Add Rated Voltage: 110-220V/12V 35W Xenon HID Bulb Irradiation Distance: 1.5-2km Average Lifetime: 2000 Hours Luminous: 3500 Lm Working Time: 2 Hours Ac 110-200V Wall Adaptor DC 12V Car Charger IC, with Function Of Over Charger, Over discharger Shoulder Belt High Impact Engineering Plastic Dia.127* length 280mm Black color

The product is also known as: ▪ Dragon Light ▪ Spot Light ▪ Hunters Light ▪ Hand Held Light ▪ Army Light ▪ Commando LightPhysical Features:Made from super tough Nylon Glass filled Heavy duty body with avg. wall thickness 2.5 mm. Suitable for all temperature conditions from - 50 deg C to 85 deg C. Water resistant, shock resistant, crack resistant body. Long life Halogen Bulb with Deep Parabolic reflector. This reflector does not crack when droplets of water fall on it when search lights is on.Re-chargeable Sealed Maintenance Free Lead Acid Battery of high performance Integrated handle with Nylon Strap for shoulder resting pad. Integrated Electronic Circuits with inbuilt charger. The HHSL is light in weight, easy to carry with multiple charging options. Beam of light Reaches upto 1 Km in clear weather conditions.

Safety Light Bar us electronically controlled safety device which helps in controlling traffic during night time, Visible from distance in the dark, it provides signal to the distant motorists. Led and fluorescent cast vinyl film in the bar emits highly visible signals. Fitted with flashlight, Light Bar is powered by two battery cells, it can be operated by two-way switch for blinking as well as flash light. Made of polycarbonate material it is exceedingly durable and crystal clear transparent.     MODEL NO: DA 107 . Safety light bar has been designed with electronic chip, equipped with rechargeable battery. Four way micro switch is used for flashing red, green & White light. The body of light bar is made of polycarbonate material. Florescent cast Vinyl film is used inside the bar to emit highly visible signals.   Suitable for:Traffic Police, Highway Petrol, Emergency Services, Firefighters, Army, Security Forces, Air Traffic Control, Person Parking guide and Construction Sites.