NARANG SCIENTIFIC WORKS PVT LTD Mayapuri, Delhi

This is triple walled incubator.  Outer wall made of mild steel powder coated; middle wall & inside wall shall be made of stainless steel 304 qlty.  There shall be mineral wool insulation of 50mm between mild steel and second wall of water jacket provides stable temperature uniformity.  Microprocessor control allows to set temp. from 5 deg.c above ambient to 70 deg.c and read out to 0.1 deg.c calibration having PID with 4 ramp & 4 soaks.  Full length toughened glass inside permits visual checks without disturbing thermal condition.  Door and water jacket design eliminate condensation on the incubator walls.  Heating elements are made of copper pipe in water jacket inhibits bacteria growth. Adjustable leveling feet compensate for uneven surface.  Incubator shall be supplied with 3 nos. shelves for having 6 nos. shelves positions to work on 200-220 V AC. 50 Hz.  

Double walled, inside made of Stainless Steel 304 Qlty and outside made of Mild Steel sheet painted in Epoxy Powder Coating. The gap of 25mm between the outer and inner walls insulated with the mineral wool and top of the bath and the concentric rings are made of stainless steel 304 quality. The temperature is controlled by a thermostat from few ºC above ambient to 100 º C with a variation of plus minus 0.5 º C. The bath is provided with two indicating lamps, concentric rings constant water level arrangement ON/OFF Switch & wire and plug but without thermometer.   Option: WBR-1 Stirrer with 1/20 H.P. high speed motor with stainless steel rod and blade provided with speed regulator can be fitted at an extra cost. WBR-2 Digital Temperature Controller Cum Indicator instead of Thermostat to cost extra. WBR 3  Option: Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator, parameter for locking etc. Alarm: It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra. WBR-1 Is compulsory to be attached with WBR-2. WBR-1 Is compulsory to be attached with WBR-3.

Made of Stainless Steel Sheet. Top of the bath and concentric rings are also made of stainless steel 304 quality. Heating elements have an automatic cut Off device when the bath gets dry. Electrically operated on 220/230 volts A.C. with arrangement of 6/12 holes.

A constant temperature as well as uniform shaking bath for a wide varieties of applications not involving memometric measurement such as incubation of Tissue slides and homogenates , protein coagulation, aerobic and anaerobic studies of Tissue Slices and homogenates it atmosphere of various gases or mixture of gases. The bath is double walled inside made of Stainless Steel and outside Mild Steel Sheet and painted in Epoxy Powder Coating. The bath has an oscillating tray riding on ball rollers and oscillated by a Governor controlled variable speed motor, shaking speed range is 40 to 140 cycles per minute. The temperature is controlled by Electronic Digital Temperature Controller cum Indicator from few degree above ambient to 70 º C with maximum temperature 100 º C. sensitivity plus minus 0.5 º C. Unitized controlled panel has individual switches for heater's knob reference dial for repeat thermostat setting, control of shaking speed and two pilot lights which indicate heater cycle as well as mains, with 1000 watts immersion element. The bath is complete with one shaking tray, one large gabble cover made of Stainless Steel for overall bath, connecting cord plug for operation on 220/230 volts but without racks and glassware.   Shaking rack & its Capacity to accommodate as above. Option:Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator, parameter for locking etc. Alarm:It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra.

A constant temperature as well as uniform shaking bath for a wide varieties of applications not involving memo metric measurement such as incubation of Tissue slides and homogenates, protein coagulation, aerobic and anaerobic studies of Tissue Slices and homogenates it atmosphere of various gases or mixture of gases. The bath is double walled inside made of Stainless Steel and outside Mild Steel Sheet and painted in Epoxy Powder Coating. The bath has an oscillating tray riding on ball rollers and oscillated by a Governor controlled variable speed motor, shaking speed range is 40 to 140 cycles per minute. The temperature is controlled by Hydraulic type Thermostat from few ºC above ambient to 70 º C with maximum temperature 100 º C. sensitivity plus minus 0.5º C. A "L" shape thermometer mounted on front panel is calibrated from 0º C to 110º C. in one degree division. Unitized controlled panel has individual switches for heater's knob reference dial for repeat thermostat setting, control of shaking speed and two pilot lights which indicate heater cycle as well as mains, with 1000 watts immersion element. The bath is complete with one shaking tray, one large gabble cover made of Stainless Steel for overall bath, connecting cord plug for operation on 220/230 volts but without racks and glassware.    

NSW walk in chamber are designed for simulating, monitoring to control environmental conditions. These chambers are double walled and modular in construction, easy to assumable at site. Size of chamber can be made as per customer requirement. Air circulation is made to create uniform temperature under RH inside. Construction:Double wall prefabricated modular panels with PUF insulation. In GIMP model we shall provide inside 316 qlty. stainless steel cuter 304 qlty. Refrigeration system with spit type condensing Unit having (CFC free refrigerant) are placed outside the laboratory area Heating system consists of SS tubular heaters. Humidity inside the chamber is created by steam injection - Boiler and water reservoir made of stainless steel with heater with low water cut off. These chambers are designed as per ICH guidelines to meet WHO and USFD A specifications. Capacity 4500 Liters Capacity 20000 Liters  

Complete made of Stainless Steel (304 Qlty.) Wtih Acrylic glass door & U.V. Light with cock for gas or vacuum line & exhaust fan. RATES FOR BIOLOGICAL SAFETY CABINETS OF DIFFERENT CLASS SHALL BE GIVEN ON REQUEST.

These are designed to provide an atmosphere free from air borne particles with Laminar air flowing downward the work table. An exhaust system may be fitted at bottom and back to throw the air outside the room. The cabinets are mostly used in Medical, Scientific and Industrial applications where very clean environment is required.   1. Satin finish S.S. table top in place of Mica Top at an extra cost:       VLF-2      VLF-3      VLF-4      VLF-6    

Most suitable for sterilization of surgical Instruments, dressing material, linen, rubber, plastic material by means of saturated steam under pressure of 15 to 22 PSI (adjustable).   Sturdy double wall construction with boiler made of Stainless Steel 16 gauge sheet. Outer shall is also made of Stainless Steel Sheet/ Mild Steel. Boiler and outer shell is provided with air insulation. Lid is made of Stainless Steel Sheet and tightened alround by radial locking . Joint less gaskets are made of Neoprene rubber. These sterilizers are hydraulically tested upto 40 PSI.   Sterilizers are fitted with water level arrangement to indicate water position inside the boiler. Pressure gauge, Air/Steam release cock two safety valve are also provided. The autoclave is fitted with indfoss pizzostat and can be set between 10 to 20 PSI. Immersion type heating element heats the water and steam to desired temp. and pressure are attained. We have provided all autoclaves to cut-off automatically when the autoclave is dry. Supplied complete with S.S. basket, cord and plug to work on 220 Volts 50 cycles A.C. supply   Fully automatic by PID Controller having facility for: Auto purging:          Set Temp. Purging Stop:         Set Temp. Auto Exhaust:         Cool Elapse Time Set Temperature:   Could be set Facility for temp. control Auto cycle stop Buzzer At cycle over Automatic timer electronic 999 mts to extra cost

Rotator shaker used in Blood Bank and hematology laboratories or blood typing, cross matching and mixing of donor blood with anti-coagulant, V.D.R.L. test and other test. Operates at 180 R.P.M.Rotates specimen in horizontal plane in ¾” circle. The 30 x 30 cm platform can accommodate slides, blood bottles, flasks and beakers by use of spring bottle holder furnished with each unit. Durable all steel construction, painted in epoxy powder coating. Turned up edges and rubber sheeting on platform to prevent slipping of specimen containers. Platform rigidly supported by steel legs for smooth silent rotation and support of heavy loads. Shaker mounted on four rubber suction feet to prevent creeping. 1/35 H.P. Motor operates on 220/230 volts A.C only Rotator shaker is complete with brass ring maker for 12 rings, indicator , ON-OFF switch , cord & plug but without glass parts . The shaker can be supplied with adjustable 0 to 30/60 minutes timer with arrangement for continuous operation at an extra cost.   Operators at 180 R.P.M. (Fixed)

Vacuum Oven Temperature Range 50 °C To 130 °C   The Outer case is Mild Steel painted in Epoxy Powder Coating. The Vacuum chamber is robust Stainless Steel supplied with two stainless steel shelves. The chamber is heated by large area heaters strapped to its outer surface and insulated with super fine mineral wool .The chamber is closed by a thick toughned glass plate sealing into a  neoprene rubber gasket. The door closure is single screw threaded catch. This system provides excellent vacuum performance, a low outer surface temperature and operator safety in the unlikely event of the glass inner door breaking.   Vacuum Controls: One diaphragm valve and a vacuum gauge are provided. The valve which are intended for vacuum connection and the admission of either dry air or inert atmosphere have their nozzel conveniently located. The Oven can be operated at any pressure less than atmospheric. Oven temperature is controlled by Electronic Digital Temperature Indicator-Cum-Controller  in the range 50 °C to 130 °C +/- 1 °C . An indicator lamp shows the operation of the heater.   SIZE INSIDE CHAMBER (STAINLESS STEEL)   A. 22.5 Cm Dia  X  30 Cm Depth                  12 Ltrs. Without Vacuum Pump, With Glass Door.   B. This Vacuum Oven without Glass Door will have stainless steel door and temp. can be maintained from 70 ° C to 300 ° C Size: 300mm Dia X 600mm Depth              43 Ltrs.  Option:Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator, parameter for locking etc.   Alarm: It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra. Timer:Automatic timer electronic 999 mts to extra cost

Vacuum Oven "B" Temperature Range 50 °C To 300 °C   The outer case is made of mild steel duty powder coated and inside chamber made of stainless steel 304 qlty. Insulation between the two walls are filled with mineral wool.  It is widely used in cosmetic, food clock, books or PCBS and other electronic components with unparalleled gentleness when drying Heating elements produce gentle heat throughout the chamber.  Temperature could be achieved from 50 °C to 300 °C +/- 1 °C through microprocessed digital temperature controller cum indicator.  It has option to control temperature precise +/- 0. °C by fitting microporocessed PID Controller having 4 ramp & 4 soak programming. It has two valves one for achieving vacuum 760hg/mm and other of feeding any inert gas or else.  The door of the oven is made of stainless steel 304 qlty.  without any glass windows. With two stainless steel perforated shelves Other size of oven may be manufactured as per customers requirement.  Rates on request. Option: Microprocessed PID Controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator, parameter for locking etc.  Alarm:It is possible to provide electronic alarm if, temperature deviates more than +/- 1 °C to cost extra. Automatic timer electronic 999 mts. To extra cost

These Freezers are fitted with Non CFC Compressors and superior Digital Controller system for precise temperature control to provide secure storage of biological  chemicals, Viruses, vaccines and tissue samples. Also ideal for use in both low ambient temperature and flexibility testing. Maintain reliable storage temperature from minus 60 °C. To (– 86 °C. in AC Room) cabinet temperature set point Temperature and under temperature alarm limit adjust in 1 °C. increments insulation by high density non CFC foamed insulation maintains desired operating temperature System insures efficient freezer performance by protecting the integrated comprises. Electrical components from terminal overload insulation with servo Voltage Stabilizer to work on 220 V AC 50 Hz. VERTICAL FREEZER (UPRIGHT CABINET) Eye level control are mounted in the door with a minimum 20 cm high density CFC free door insulation. Convenient positive open can latch release Vacuum for earlier open and includes built in keyed lock for security. With one magnetic help eliminate frost build up. All upright models come with three adjustable stainless steel interior shelves for inventory storage. FLV-1       3.3 CU.FT             W 410 x D. 410 x H 585mm         95 Ltrs. FLV-2       6.1 CU.FT             W 505 x D 415 x H 830mm          171 Ltrs HORIZONTAL FREEZER (CHEST CABINET) Heavy Duty counter balanced lid has keyed lid lock built in for security. Double seal lid gasket and sub lids eliminate frost build up. FLH-1  3.3 CU.FT      L 585 x W. 410 x D 410mm        95 Ltrs. FLH-2   6.1 CUFT.     L 830 x W 505 x D  415mm        171 Ltrs. Alarm:It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra.

This is triple walled, inside made of stainless steel and outside made of mild steel  painted in dark chocolate colour.  Insulation between the two walls is filled with mineral wool.  It is fitted with Electronic Digital temperature indicator cum controller and circulation fan also to get uniform temperature form plus/minus 3 deg. C. above ambient to 250 deg. C.  These dryer are available in capacity of 3, 4, 6 & 9 trays with one No. M.S. drip tray.   Option: Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator , parameter for locking etc.     Timer: Automatic timer electronic 999 mts to extra cost. Alarm:It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra.

Double walled, inside made of aluminum and outside of Mild Steel sheet painted with Epoxy Powder Coating. Thermostatic control from few ºC above ambient temp. to 80 º C plus minus 0.5 º C Complete with indicator, wire & plug. To work on 220/230 Volts A.C. without thermometer.

Made of heavy duty Mild Steel pipe and powder coated each shelf size 1200 x 400mm and distance between each shelf is 400mm top of shelf shall be made of nylon sheet. Each shelf is fitted with 4 nos. 40 watts fluorescent light. Nylon wheels provided for easy movement without any scratch on the floor with Photoporiodic time and 3, 4 and 5 U V light in each unit.                                                        No.of Shelves                                                                  4                                                                  5                                                                  6

The temperature range of the water bath is from few degree C. above room temperature to 100 deg. C with an accuracy of 0.5 deg. C. This bath is suitable for the Washer man, Kolmer and Khan Test inactivation, Paraffin Embedding and many other applications in the laboratories. The bath is constructed double walled inside, made of Stainless Steel and outside of Mild Steel Sheet duly painted with epoxy powder coated provided with 25 mm mineral wool insulation on five sides. The Temperature is controlled by a Hydraulic type thermostat from few ºC above ambient to 100 deg. C sensitivity of plus minus 0.5 Heating element are made of copper Nickel plated tabular type and approximately extend the full length of the bath. Control panel is provided at lower portion of the bath consisting of two neon pilot lights which indicates control cycles as well as the mains heater switch, temperature control knob. The bath is complete with perforated and removable diffuser shelves. Stainless Steel cover, brass drain plug, cord with plug to work on 220/230 volts A.C. but without rack and thermometer.   Option:SBO-1  Stirrer with 1/20 H.P. High Speed motor with stainless steel stirring rod and blade provided with speed regulator can be fitted at an extra cost.    

Table Top Steam Sterilizer (Pre & Post Vacuum Facility)   “NSW” pleased to introduce table top steam sterilizer for today’s growing demand for more sophisticated sterilization technologies. Any private or dental clinic can enjoy the benefit of this technology right in their office. Outpatient clinics, which have increased significantly in recent years, perform highly skilled invasive surgery on their own premises. They rely on advanced sterilization technology. In addition, the increasing tendency towards modular space design in the clinic makes our pre & post vacuum tabletop autoclaves the perfect solution. Construction: This autoclave is made of complete stainless steel 304 Qlty having outer & inner wall & has capacity of 22 liters chamber has compact outer dimensions making it a perfect fit for today’s contemporary clinic. There is mineral wool insulation between the two walls .Designed to sterilize class B cycles. A common application is in the medical or (operating room) as an independent sterilization unit or in dental and private clinics that need to sterilize narrow and hollow instruments and wrapped packs. It has 2 nos. perforated shelves. The water reservoir has capacity of 6 liters of distilled or low quality deionized water. This sterilizer are designed to perform class B cycle that meet the strictest EN 13060 European standards.  Pre Vacuum Air Removal: Porous and packed load types as well as fabrics have one thing in common: Air is trapped inside these instruments and fabrics, resulting in air pockets that prevent the full penetration of steam. It is known that spores and bacteria can survive at 134 Deg.C in air pockets.  Therefore, pre vacuum air removal eliminates air pockets from all load types and maximizes steam penetration to instrument components. Post Vacuum Drying: When hot steam comes in contact with the cooler instruments, condensation can form. Condensation becomes even more serious with packaged loads, when moisture can remain after the cycle ends. A moist load does not provide sufficient SAL (Sterility Assurance Level). Post vacuum drying provides complete drying of porous loads and hollow instruments at the end of the sterilization process. Temperature Control: Temperature shall be controlled by Microprocessed PID Controller which will have following features: Auto purging: Set Temp. Purging Stop: - Set Temp. Auto Exhaust:- Cool Elapse Time Set Temperature:- Could be set Facility for temp. control Auto cycle stop Buzzer at cycle over Operating Temp. 121 Deg.C to 135 Deg.C Sterilizing Pressure 1.2 to 2.3 kg /Cm2 Pressure can be achieved upto 760mm/ hg approx. This sterilizer work on 200/ 220 volts A.C 50 Hz. Option:PC connection port for direct PC access enables direct software updates and remote maintenance or data can be collected through USB port.  

Sterilizer Pressure Cooker Type (Electrically Operated)   This Sterilizer is made of Aluminium for quick transfer of heat, which generates steam under pressure.  As soon as it reaches the right temperature the sterilizer are subjected to saturated steam environment for preset specified time.  It has double protection for safety Sterilizer pressure cooker type complete made of aluminum bowl. Electrically operated.  

The purpose of stability testing is to provide evidence on how the quality of a drug substance or drug product varies with time under the influence of a variety of environmental factors such as temperature, humidity, and light, and to establish a re – test period for the drug substance or product under recommended storage conditions. Hence, Pharmaceutical Stability Chamber serves as an important quality attribute for the product. "Calibration / Validation" Calibration   Temperature sensor probe calibration with traceability to ERTL Temperature controller calibration with traceability to ERTL    Validation   IQ, OQ, PQ and DQ documentation and protocols shall be provided with equipment. Documentation shall be given after supply & Installation. Performance Qualification with Temperature Mapping. The performance Validation Test consists of one cycle at any one temperature point for an 8- hour period.

Country of Origin : India

Type : Stability Chamber

Certification : CE Certified, ISO 9001:2008

Color : White

Voltage : 220V, 440V

Condition : New

Automatic Grade : Automatic, Fully Automatic

Power : 1-3kw, 3-6kw

Driven Type : Electric

Warranty : 1year

Warranty : 1 YEAR (WITHIN INDIA)

MLTI USE VERTICAL OR HORIZONTAL The NSW Split Tube Furnace comprise a furnace body which is mounted on vertical stand and is hinged so as to split into two halves along its length. The free standing vertical design is ideal 900 deg.c  for warp around heating applications such as extension test rings or vertical reaction tubes.  The NSW is also available as a lower temperature version with 900 deg.c maximum operating temperature.  Usually required but does not include an appropriate accessory worktube 2 ½ inch.   Standard Features   900 deg.c maximum operating temperature heated tube length of 455mm furnace split into two halves to accommodate reator vessels, large wrokpieces or samples fixed into a test rig suplied in near hinge configuration complete with stand over temperature protection from secondary controller Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator, parameter for locking etc.

Double walled inside made of Stainless Steel 304 qlty. and outside of mild steel sheet.  The gap of 75mm between two walls is filled with pure mineral wool.  See through lid provides complete visibility minimizing the need to open the chamber.  Rapid air circulation produces quick temperature equilibration and recovery when needed.  The temperature is controlled by microprocessor electronic digital temperature indicator cum controller form 5 °C above ambient to 60 °C +/- 0.5 °C .  It has maximum orbital shaking speed up to 220 RPM with electronic digital timer having settable range upto 999 minutes.  RPM Meter is also fitted in the control panel to check the speed of rotation.  This shaker has clamp of 500 ml conical flask for 4 nos 250 ml. conical flask for 8 nos and 100ml. conical flask to accommodate 4 nos in a shaking tray size: 455 x 455mm. This shaker Incubator works on 220 V.A.C. 50 hz.  This is supplied with connecting cord. & plug. Option:Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator , parameter for locking etc. Alarm:It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra

The temperature range of the water bath is from few degree C. above room temperature to 100 deg. C with an accuracy of 0.5 deg. C . This bath is suitable for the Washerman, Kolmer and Khan Test inactivation's, Paraffin Embedding and many other applications in the laboratories. The bath is constructed double walled inside, made of Stainless Steel and outside of Mild Steel Sheet duly painted with epoxy powder coated provided with 25 mm mineral wool insulation on five sides . The Temperature is controlled by Electronic Digital Temperature Controller-cum-Indicator a from few ºC above ambient to 100 deg. C sensitivity of plus minus 0.5 Heating element are made of copper Nickel plated tabular type and approximately extend the full length of the bath. Control panel is provided at lower portion of the bath consisting of two neon pilot lights which indicates control cycles as well as the mains heater switch, temperature control knob. The bath is complete with perforated and removable diffuser shelves. Stainless Steel cover, brass drain plug, cord with plug to work on 220/230 volts A.C. but without rack and thermometer. Stirrer with 1/20 H.P. High Speed motor with stainless steel stirring rod and blade provided with speed regulator. Lid of water bath is made of Stainless steel 304 quality.   Option:Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator , parameter for locking etc. Alarm:It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra.. Timer:Automatic timer electronic 999 mts to extra cost.

Uses:   Seed Testing                         Biological Studies Veterinary Science Forestry Research   Pathology   Construction:   This is double walled cabinet insulated with 75 mm by puff  between interior and exterior walls.  Outer chamber made of mild steel and furnished in durable white enamel paint.  The inner chamber made of anodized aluminum with shelf supports allowing wide range of shelf positions and spacing.    Diamension of Each Working Chamber Height 910mm x width 555mm x Depth 605mm   Chamber has 14 trays. The distance between the tray is 4 CM.  chamber have full view acrylic door which allows inspections of sample without disturbing temp. of working chamber.  Outer double walled metel door with lock and key.  A push type switch for illumination lamp is provided in chamber of inspection of the samples during high condensation cabinet is mounted on caster.    Water Reservoir For Humidity:-Chamber has stainless steel water reservoir at the bottom and water is heated by low wattage immersion heater which assures to maintain.  The humidity from 90 to 95% +/- 3% ( non- adjustable) and to be maintained at this level. Humidity shall be controlled by Micro processed temp. & RH controller temp. accuracy± 1 °C & RH Accuracy ± 5 °C. water reservoir has constant water level arrangement with two no. brass nozzle, one for inlet and other for outlet and a brass drain plug is also provided.   Temperature:-Temp. in chambers is controlled by a Digital Indicator Cum Controller from in the variation of plus minus 1 deg.c. at any temp. between 5 to 60 deg,c at normal ambient temp.  The cooling chamber is provided with a selected switch to operate the unit either above or below ambient temp. desired.   Cooling System:-Chamber has cooling system by a heavy duty sealed compressor with all accessories and also a fan cooled condenser are fitted at the bottom exactly below the working chamber.  Copper cooling coil is fitted at the back of inside chamber.   Air Circulating:-Chamber has separate air circulation by FH Motor with ample provision for an even distribution of air by a fan which assures uniformity of temp. throughout the chamber.   Control Panel:-Control Panel is given at the top of chamber having ON-OFF switch three indicators for main cooling and heating , temp. setting knob which is graduated in the centigrade from 5 to 50 deg.c volt meter in cooling chamber prismatic Digital Temp. Indicator graduated from 0-50 deg.c., to work on 220/230 Volt 50 cycles A.C only.   SGA-8D Seed Germinator (Without lighting arrangement) inside made of anodized aluminum.  Dimension of working chamber H.910x W.555xD.605MM with 14 trays.  Fitted with cooling and heating arrangements.  Temp. from 5 to 50 deg.c +/- 1 deg.c..  Humidity range 90 to 95% plus minus 3%.( non- adjustable) 308 Ltrs.   SGA-8LT Seed Germinator SGA-8D provided with lighting arrangement and 0-24 hours time switch for regulating cyclic illumination condition with electronic digital voltmenter in super deluxe model.   Optional:-   Interior chamber and shelf made of stainless steel. 304 Qlty can be supplied, instead of Anodized aluminum.  Alarm:It is possible to provide electronic alarm if, temperature deviates more than ± 2 °C and RH ± 5% to cost extra.