Neat Cutting Oils Dealers in Delhi

• Type: Pure
• Application: Cutting
• Grade: 15W-40 CH-4
• Form: Liquid
• Packed: In Bucket
• Cooling properties: Excellent

Z Premium Neat Cutting Oil are used in a variety of machining operations e.g. grinding, turning, milling, broaching, drilling, tapping, gear cutting etc. primarily to provide cooling and lubrication which lead to good tool life and appropriate surface finish of the components being machined.

• Application: Industrial
• Packing: 210l, 50l, 20l
• Form: Liquid
• Packed: In Bucket
• Storage: Cool & Dry Place
• Purity (%): 100 %

palkut st these products are high performance neat cutting fluids, designed for a wide range of applications. the product meet the highest demands of operating, cutting conditions, tools & work piece materials. each of these products differ in their viscosity & other characteristics etc. to cover a wide range of applications. these products offer stable oil film, excellent heat dissipation, ep properties & improved surface finish.   palkut st-1,2 non-staining type neat cutting oils containing chlorinated ep additives. these products are recommended for machining operation on mild steel, carbon steel, nickel steel and manganese steel such as thread grinding, form grinding, milling, honing & lapping etc   palkut st-3 non-staining type sulphurised fatty oil based neat cutting oil which covers a wide range of machining operations, aids in obtaining good surface finish & protects tool from excessive wear. recommended for application in high speed automatic machine tools & multispindle lathes where operations like turning, honing etc. are performed. it is also suitable for application as general purpose machine tool lubricant.   palkut st-4 it contains sulpharised & chlorinated additives which provides excellent performance in all machining operations on non-ferrous metals & can also be used for gear hobbling, gear sharing, screw cutting, tapping, milling etc.   palkut st-5 it is an active sulphur-chlorinated type cutting oil which is recommended for deep hole drilling & deep hole boring. it is suitable for cutting of ferrous & ferrous alloys only.   palkut st-6 it is a neat cutting oil containing sulphurised fat besides active sulphur & chlorinated additives. recommended for severe metal cutting operations including gear cutting, broaching, thread cutting, hobbing etc. it is not recommended for use on non-ferrous metals.

These Neat Cutting Oils are deliver Extreme Pressure and Weld Load bearing capability apart from lubricity and cooling to the work piece and tool. Some of these oils contain additives which are active type and corrosive to yellow metal while some are designed for soft yellow metals.Following are the types of Neat Cutting oils:i) NC 103/170: Active type, Low to Medium Viscosity : EXPRESS NC 103/170 are low to medium viscosity dark brown oil containing active sulfur, chlorine and oiliness additives. These products are recommended for gear cutting, hobbing, thread cutting, deep hole drilling operations where temperature between metal surfaces reach equal to weld temperature. These products are not recommended for use on cuprous metals.Performance : IS 3065, Type 3 ii) NC 100: Non Active, Low Viscosity : EXPRESS NC 100 is light red colored highly refined, low viscosity mineral oil compounded with blend of high quality fatty oils. This product provides very good cooling properties under high speed conditions. It is ideally suited for Honing Operations of steel liners and super-finishing operations even on hardened metals and also flat Honing operation. These grades are non staining and non corrosive to Cuprous metals.Performance : IS 3065, Type 2 iii) NC 150 : Non Active, Medium Viscosity : EXPRESS NC 150 contains high oiliness additives and is recommended for general machining on ferrous and non- ferrous metals. It is recommended for use on multi-spindle lathes for a number of operations like turning, chamfering, honing etc.Performance : IS 3065, Type 2 iv) NC 155 : Non Active, Very High Viscosity :Performance : IS 3065, Type 2v) NC 335 : Non Active, Medium High Viscosity : EXPRESS NC 335 contains sulfur, chlorine, oiliness additive and phosphorous and recommendedfor deep hole drilling and precision grinding of all kind of steel, gear hobbing and gear shaving operations on N C machines.Performance : IS 3065, Type 2 vi) NC Super 155 : New generation oil Active, non staining, no fouling smell, Medium Viscosity:Performance : IS 3065, Type 3

• Type: OIl
• Brand Name: SMK Petro
• Color: White

SMKPetro Neat Cutting Oils are deliver Extreme Pressure and Weld Load bearing capability apart from lubricity and cooling to the work piece and tool. Some of these oils contain additives which are active type and corrosive to yellow metal while some are designed for soft yellow metals.   http://www.smkpetro.com/neat-cutting-oils

neat cutting oils, cylinder oil, synthetic grease, dry film lubricants

neat cutting oils, rolling oils, antirust formulations, quenching oils