Ngp Industries Ltd. Kalkaji, Delhi

XLPE foam specially designed for applications that require enhanced sound absorption properties. This non-fibrous, tri-dimensional chemically cross linked fire-retardant foam provides excellent sound absorption characteristics ideally suited in duct lining application. INSU sound-xlo does not disintegrate or particulate unlike conventional products. Features : Long-lasting, non-deteriorating and also does not particulate hence; provides consistent performance throughout its life span Ease of handling, application and installation Low adhesive consumption Inert to most chemicals CFCHCFC free production - environment friendly Recommended Applications Duct internal lining Plenum area lining Pipe lagging Gaskets AC equipment insulation Room acousticS.

Rockloyd Slabs are conforming to IS - 8183 : 1993, ASTM C612, C553 and equivalent BS 3958-5 are designed for thermal and acoustic insulation of flat or slightly curved surfaces operating at temperatures up to 750º C. The robust fibers combine high levels of thermal efficiency. Approved for A - 60 class insulation.

Rockloyd Preformed Rockwool Pipe Section conforming ASTM - C547, IS - 9842 : 1994 and equivalent BS 3958 Part 4 is intended for the thermo-acoustic insulation and fire protection of pipe works operating at temperatures up to 750ºC. The pipe insulation is manufactured from long non-combustible rock fibers with a high performance binder.

Rockloyd Lightly Resin Bonded Rockwool Mattress conforming to IS - 8183, ASTM - C553, C592 and equivalent BS-3958 part -3 is a lightly resin bonded insulating material available with or without facing. Mattresses can be faced on one side or both sides to form a firm but flexible multi-purpose insulating materials.

Rockloyd Slabs are designed for thermal and acoustic insulation of flat or slightly curved surfaces operating at temperatures up to 750º C. The robust fibers combine high levels of thermal efficiency. Approved for A - 60 class insulation. Suitable for acoustical insulation.

Rockloyd Preformed Rockwool Pipe Section is intended for the thermo-acoustic insulation and fire protection of pipe works operating at temperatures up to 750ºC. The pipe insulation is manufactured from long non-combustible rock fibers with a high performance binder.

Rockloyd-Nodulated Rockwool is a premium quality engineered mineral fibre. A specific combination of different types of volcanic rocks and well-defined bio-soluble.

Rockloyd Inhibited Rockwool is specially developed to provide excellent corrosion resistent properties. It is preferred on SS surface, where stress corrosoin needs to be stoped like in ship building industries, offshore, refineries, petrochemical plants & humid regions.

UF materials are suitable for temperature range between -200°C to +110°C. PIR Slabs & Pipe Sections are suitable for use between -200°C to +145°C. It has low thermal conductivity value of maximum 0.021 wmk at 10°C. It is not easily ignitable and has negligible water permeability. It is suitable for cold chilled pipelines, building roof & wall insulation, equipment insulation and horton sphere insulation.

Temperature Range : -200°C to +110°C

PUF materials are suitable for temperature range between -200°C to +110°C. PIR Slabs & Pipe Sections are suitable for use between -200°C to +145°C. It has low thermal conductivity value of maximum 0.021 wmk at 10°C. It is not easily ignitable and has negligible water permeability. It is suitable for cold chilled pipelines, building roof & wall insulation, equipment insulation and horton sphere insulation. PUF PIR is available in boards, pipe sections, radiused and beveled lags, with or without factory laminated facings.

A heavy duty easy to install prefabricated pipe support system of truly revolutionary proportions. Pipe Supports are made from specially formulated chemical systems that results inn high density rigid polyurethane foam.

Rockwool insulation products are thermaly efficient insulation materials and are fully safe to use under all conditions. Rockwool is asbestos free. Rockwool materials has been used world wide for over 70 years, and during that time, their manufacture and use have been extensively monitored and researched.

Country of Origin : India

Size : 72x36inch

Type : Rockwool Mattress

Rockloyd Lightly Resin Bonded Rockwool Mattress conforming to IS - 8183, ASTM - C553, C592 and equivalent BS-3958 part -3 is a lightly resin bonded insulating material available with or without facing. Mattresses can be faced on one side or both sides to form a firm but flexible multi-purpose insulating materials. Service temperature of Rockloyd Mattress is upto 7500 C.Rockloyd Mattress are specially developed to use in large process pipe-work, tanks, vessels boilers and ducts to provide unrivalled combination of matchless thermal insulation, fire protection, sound attenuation, high performance and flexibility of use.

Thickness : 40, 50, 65, 75 mm

The product range comprise of profile sheet of various types developed to provide scientific solutions for roof and side walls of industrial as well as commercial buildings. The product provides with a precisely engineered wide "Rib and Flute" design to ensure wide spanning and quick recovery after being subjected to excessive loads. This product offers new dimensions to architectural aesthetics and frees the designer of monotonous standard Trapezoidal design.To meet the most stringent architectural design requirements, products are being made available in the following base material and external finish combinations.

Thickness : 0.42 mm

The product range comprise of profile sheet of various types developed to provide scientific solutions for roof and side walls of industrial as well as commercial buildings. The product provides with a precisely engineered wide "Rib and Flute" design to ensure wide spanning and quick recovery after being subjected to excessive loads. This product offers new dimensions to architectural aesthetics and frees the designer of monotonous standard Trapezoidal design.

Supercera Blanket is a refractory fibre needled mat made without binder from Supercera fibres the only super-spun double needled fibre in the country today. Supercera RTZ and HTZ blankets zirconica stabilized and are suitable for use upto 1260°C and 1425°C respectively. Both blankets have excellent resistance to most chemicals. If wet by oil or water, their thermal and physical properties are fully restored upon drying. It is available in density of 64, 96 & 128 kgm3. size 7620x610mm, thickness: 6,12, 20,25, 50 mm. They confirm to IS 15402 & ASTM C892.Temporary repair of refractory furnace linings and roofs.

This Cold Storage panel meets every single requirement of today's modern cold Storage, Controlled Atmosphere Storage, Pack House, Shelters & Clean Room Enclosure, backed by NGP Industries Ltd the acknowledged leader in Thermal Insulation

Thickness : 60mm

Loid Coal Tar Enamel is widely used for Corrosion protection, Resistance to Bacteria & Marine Organism, Resistant to Catholic Disbanding, Resistant to Root Growth Penetration, High Electrical Resistivity, and Chemical Stability, High resistant to Petroleum Products etc. and provides long term protection to applicant areas and taking its full advantage unrivaled properties are being preferred to use in subterranean pipe lines, submarine cross country pipe lines, underground pipe lines, penstock, inclined piping etc. There are no special requirements for storage of solid enamel, although storage in shaded area is helpful when breaking up the enamel into smaller pieces.

Loid Pitch is black solid material at room temperature, consists of a complex mixture of predominantly aromatic hydrocarbons and exhibits excellent properties as binder for anode use for Aluminium smelting industry.Coal Tar Pitch is black solid material at room temperature, consists of a complex mixture of predominantly aromatic hydrocarbons and exhibits excellent properties as binder.

Loid T-11 (Coal Tar Enamel) is widely accepted as one of the most effective & economical anti-corrosion protection material. It serves as the most protective measure against corrosion and deterioration due to rusting. Loid T-11 (Coal Tar Enamel) is manufactured in accordance with standards BS: 4164, AWWA: C203 and IS: 10221.

Ceramic Paper is manufactured from high temperature Supercera Ceramic Fibre product containing 20-25% organic material to give it an extra ordinary pliability. If wet by water, steam or oil, its thermal and physical properties are restored up on drying.

Thickness : 1 to 6 mm