Nipping Press Dealers in Delhi

• Country of Origin: DELHI
• Brand Name: BEST

We are offering Nipping Press that is special purpose system for book binding for finishing of hard-cover/perfect-bound books, diaries, dictionaries & directories, etc. The PLC based control panel of Nipping Press is for the best reliability and simplified diagnostics. The high speed blower/exhaust fan of Nipping Press ensures that the ambient temperature in the power pack area is maintained. The latest hydraulic technology and controls of the Nipping Press makes it possible to process 700/800 books (single book-block upto 30mm spine thickness) per hour. Nipping Press A process of reducing/knocking out the swell in the spine of thread-sewn book-blocks or gathered folded-forms (signatures) being prepared for hard-case or soft cover/perfect binding. Ensures the book-blocks are rectangular in shape and free from extreme gradients in the folded/sewn area for quality and enhanced life of the book. Other Operator Features Selection of Manual or Semi-auto mode Counter for number of Book-blocks processed Dedicated switches for Clamping and Nipping functions in Manual Mode Emergency Switch and Recycle Push Buttons are easily located on the Top Cover. Emergency Switch ends the cycle and resets the machine to starting position. For Operator's Safety Both the push buttons are required to be pressed simultaneously for initiating the cycle. An intricate safety device is incorporated as further protection in case of failure of recycle switches once operator's hands are in the way of the clamping area.

NIPPING-the process of reducing / knocking out the Swell in the spine of: Thread-sewn Book-Block or gathered/collated folded-forms (signatures) being pressed for Hard-case or Soft Cover / Perfect Binding. SMASHING-the process of removing the air from the folds and flattening the overall area of the Book-Blocks. BOOK-BLOCK should be rectangular in shape and free from extreme gradients in the folded sewn area for quality and enhanced life of-the BOOK. Nipping Press and Smashing & Nipping Press, these offline semi-automatic machines for producing rectangular & compact Book-Blocks have become an important part of the Binding industry. To meet the need for faster system with maximum safety and operator efficiency, the ONLINE System was launched. The unit consists of two independent pressing stations for Nipping and Smashing respectively to process sectionsewn book blocks. The machine can be used as an offline or in conjunction with another Book-block preparing system. Book-block is dropped manually at the feeding station on the conveyor. A simple mechanism ensures the same travels the correct distance to position itself in the centre of the Nipping and Smashing stations respectively. Conveyor enables the Book-block to be delivered to the Chute whilst Nipping & Smashing of the subsequent blocks are being processed at 15/20 cycles per minute. PLC based control panel ensures optimum reliability and simple diagnostics with sensors ensuring no damage is caused to any Book-Block. Centerlised Lubrication System incorporated to ensure maximum life of the phosphor bronze bush/s and smooth functioning. Power saving feature ensures the motor switches off automatically after pre-set delay time. Ambient temperature in the Power- Pack area is maintained for consistent productivity and extended life of rubber parts.

Smashing is the process of compressing and removing the air from the folds and flattening of the Overall area of the Book-Blocks. Smashing strokes can be set in multiples to suit the compacting requirement for the desired rectangular shape. After the Smashing cycle the Book-Block is held firmly and Nipping operation follows for knocking out the excessive swell in the spine. Book-Block should be rectangular in shape and free from extreme gradients in the folded sewn area for quality & enhanced life of the BOOK. Smashing strokes (adjustable) � from one to nine with two Nipping strokes, timing set in increments of 0.1 Seconds through the PLC (Programmable Logic Controller). The Smashing and Nipping hydraulic pressure is adjustable. Production speed of 600 to 700 Books (single Book of 30mm spine thickness) per hour can be achieved. Some of the other operator friendly features on the PLC are Manual & Semi-Auto option &Counter for number of Books processed. Dedicated Switches for Clamping (Smashing) and Nipping functions provided on the control Panel. Emergency and Recycle Push-buttons are located conveniently on the Top Cover. For operator�s safety: both the Push- Buttons need to be pressed simultaneously and Emergency Switch aborts the cycle immediately in case of an accident. Safety Curtain (sensor-based) is incorporated for operator�s protection. The Smashing (Clamping) Nipping operation is instantly aborted on breach of the Safety Curtain. This feature is a foolproof measure to protect the operator from any accident etc.

Every body who tries their hands in bookbinding wants a real Book Nipping Press Hydraulic Pressure. There are many styles of book press that one can use but there are certain technical requirements that make some presses better than others. Basically a press used in bookbinding process consisits of a press screw which moves a floating platen up and down against a fixed platen.The platen faces screw to distribute the pressure from bottom point of contact with the press screw.

Nipping Presses - 2 Units, Christmas Card