Nova Valves Dealers in Delhi

All valves are 100% hydro tested. Double union valves in PVC-U Antiblock system thereby preventing ball jamming Working pressure: PN 16 Available in all sizes from 20 mm upto 90 mm

• Feature: Anti Blowout design, Fire Safe & Normal Application
• Material of Construction: Forged and Cast Carbon Steel and Stainless Steel

L&T Ball Valves are available in single-piece, two-piece and three-piece constructions. In these valves, line pressure forces the floating ball against the downstream seat to effect bubble-tight sealing. Blowout Proof Stem. The side-entry stem of L&T Ball Valves has a shoulder that bears against a matching shoulder in the body to make it blowout proof - the higher the line pressure, the better the sealing to atmosphere. High Integrity Stem Sealing. Sealing to atmosphere is further enhanced by stem thrust seals and stem packing rings. To compensate for wear and thermal expansions, Belleville springs are used. Mirror-finished Solid Stainless Steel Balls. To obtain bubble-tight sealing and lower operating torques, mirror-finished SS balls are used as a standard. The solid construction of the balls guarantees higher structural strength. Seats with Pressure-relieving Slots. Seats with fine grain structure are used to ensure better strength and longer life. Pressure-relieving slots are a unique feature of L&T Ball Valves. The slots relieve upstream pressure when the valve is in closed position and prevent seat damage. Actuator Mounting Flange. L&T single-piece and two-piece Ball Valves are provided with an integral actuator mounting flange conforming to ISO 5211. Please note that full bore valves in sizes DN 15 to DN 25 would be supplied with mounting arrangement as per L&T's manufacturing standard. Fire-Safe Feature. L&T fire-safe Ball Valves feature secondary metal seats. In the event of a fire, after the soft-seat totally sublimates, the ball moves and abuts the downstream metal seat to form a leak-tight seal. Cavity Pressure Relief Mechanism. A slight increase in temperature of fluid entrapped in ball cavity can cause a rapid increase of pressure and damage the ball and seats. To prevent this, L&T Ball Valves are equipped with automatic cavity relief mechanisms. When the valve is in open position, a hole provided on the ball connects the body cavity to the ball port and thereby ensure that cavity pressure does not build up. In the closed condition, when the cavity pressure rises above a designated level, the seat lip deflects to relieve pressure to the upstream side. Antistatic Feature. Static electricity builds up inside a valve when the ball rubs against non-metallic seats. This is a fire hazard, especially in flammable fluid pipelines. L&T Ball Valves have inbuilt antistatic mechanisms to provide electrical continuity. Stems of full bore valves of size 65 mm and above and regular bore valves of size 80 mm and above are equipped with spring-loaded plungers. In valves of smaller sizes, electrical continuity is achieved by using Carbon-filled PTFE thrust seal and graphite stem packings. On-line Service. Three-piece Ball Valves are designed for easy on-line service. To access the valve internals, remove three connector bolts and swing the body out using the fourth bolt as a pivot.

Ball Valves are considered an ideal substitute of metal or alloys. We bring forth a wide assortment of Ball Valves that are produced from superior quality material. They are solid in construction and offers durable finish and low maintenance. We are a renowned Ball Valves Supplier from Delhi (India). We make them available in varied dimensions to meet the variegated Ball Valve needs of the buyers. Also, our Ball Valves assortment is economically priced.

• Application: Gas Fitting, Oil Fitting, Water Fitting, Etc.
• Pressure: High
• Feature: Casting Approved, Durable
• Color: Red
• Size: All Sizes
• Material: Brass
• Condition: New

We are offering wide range of ball valves.

• Material: Metal
• Application: Gas Fitting, Water Fitting
• Pattern: Plain
• Pressure: High Pressure
• Feature: Easy Maintenance.
• Operation: Manual
• Control model: Cut type, adjustable type
• Connection: Welded
• Specifications: Standard

Fabricated out of superior-grade metals with the help of the latest hydraulic presses, our Valves are structurally stable, dimensionally accurate and excellently finished. We make the available in different specifications to cater to varied requirements of customers. Since, we practice Quick Response Manufacturing, we provide Valves in bulk, at market leading prices, as per requirements of buyers. Hence, we are trusted Manufacturer and Supplier of Valves suitable for commercial and residential usage.

• Media: Water
• Connector Type: Threaded
• Material: Brass
• Brand Name: True Bath Fittings

• Structure: Full Port, Standard Port
• Pressure: 0.6, 1.0, 1.6, 2.5 MPa
• Body: WCB Steel, Stainless Steel with epoxy coated
• Ball: WCB steel, Stainless Steel, PTFE Lined Steel
• Seat: Reinforced PTFE
• Nominal diameter: DN 15 to 250 mm
• Temperature range: -80
• Connection: Flange (DIN or ANSI Class 150 & Class 300)
• Operator: Lever, Pneumatic, Electric
• Inspection: 20 KV Spark Testing
• Optional: Drain Ball Valve

We supply with cold storage doors, lock set, door hinges, door gasket, temperature meter & other accessiories.

The ball valves GS CIM312 are certified in accordance with the European standard EN 331:1998. They are approved in accordance with the European standard for gas appliances (90/396/EEC). Manufactured in accordance with EN 29000 - ISO 9000 are suitable for gas at low pressure. Available in the following sizes: 15mm, 22mm, 28mm, 35mm 42mm, 54mm and 76mm and 108mm sizes.  

• Port: MUNDRA

• Structure: Full Port, Standard Port
• Pressure: 0.6, 1.0, 1.6, 2.5 MPa
• Body: WCB Steel, Stainless Steel with epoxy coated
• Ball: WCB steel, Stainless Steel, PTFE Lined Steel
• Seat: Reinforced PTFE
• Nominal diameter: DN 15 to 250 mm
• Temperature range: -80
• Connection: Flange (DIN or ANSI Class 150 & Class 300)
• Operator: Lever, Pneumatic, Electric
• Inspection: 20 KV Spark Testing
• Optional: Drain Ball Valve

We are considered as the trusted supplier and trader of Standard Flow Ball Valves. Ball valve is also known with other name flow valves….

• Media: Water, Air
• Color: Silver
• Condition: New
• Temperature Of Media: Medium Temperature, High Temperature, Low Temperature
• Pressure: Medium Pressure, Low Pressure, High Pressure
• Material: Forged Brass Body, Brass
• Size: 1.25 INCH
• Fire Safe: Yes
• Suitable for: Water, Gas, Steam and Oil
• Model No.: MV - 101
• Handle Material: MS
• Place Of Origin: INDIA
• Valve Size: 1-1/4 INCH
• Working Temperature: -10 to 100 deg C

We Offer Ball Valve Pprc. available Size 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm.

• Material: Carbon Steeel
• Certification: ISO 9001:2008
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pressure: High
• Feature: Blow-Out-Proof, Casting Approved
• Finishing: Polished
• Sizes: From 15 mm to 250 mm

• Type: Ball Valves
• Material: Carbon Steeel, Metal, PP, PVC, Stainless Steel, UPVC
• Color: Black, Blue, Red, Sky Blue, White
• Condition: New, Used
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Casting Approved, Durable, Easy Maintenance., Investment Casting
• Color: Blue, Red, Sky Blue, White
• Automation Grade: Automatic, Manual

Technical Standard   Normal pressure: 2.0MPa Working medium: water,gas Working temperature: -20°C

Anti-fire design makes this Ball Valve stand apart from the rest. These Ball Valves are manufactured in confirmation to the set industrial norms and standards. Excellent forging material is used in the construction of these Ball Valves, thereby, making them rigid. We are among the reliable names to get Premium Ball Valves.

• Material: Bronze Brass
• Size: 15 Mm
• Feature: Provided with Stainless Steel Ball., Full Bore, Two Piece Design.
• Brand Name: Zoloto
• Model Number: 1008
• Valve Size: Shell : 25 kg/cm2g (350 psig)
• Working Temperature: 220 Degree C (Max)

• Size Range: 15NB – 600NB,

As we know the definition of valve is to make available the flow from one way to another way. It is completely one way supply system and that too can be controllable. In the system of ball valve the supply system is either allowed or stopped with the ball inside the body of this valve and that is why this is known as ball valve. YASH” make Ball Valves are quarter-turn, straight through flow valves that have a round closure element with matching rounded seats that permit uniform sealing stress. Ball Valves are available in a variety of body styles, including one-piece, two-piece, three-piece and flanged body construction. They are used in situations where tight shut-off is required. The type of seat can vary with the valve pressure rating and materials of construction.

• Range :: 1/2'' to 12''
• Pressure Class :: ANSI 150# to 600
• End Connections :: Flanged, Screwed, Butt and Socket Welded
• Manufacturing Standards :: BS-5351
• Face to Face:: as per ANSI B 16.10
• End Flanges :: as per ANSI/BS/DIN
• Body Type:: Single/Two/Three piece design
• Ball :: Full/Reduced Bore

Ball valves are of soft seated, Floating Ball.  The Stem Flange, on entire part of the stem, prevents the stem from blowing out pressure within the body cavity.  This feature also allows replacement of stem packing while the valve is under pressure. These ball valves are used generally for quick shut off.  

• Material: Brass
• Size: 1/4" to 4"
• Application: Water
• Design: Single Piece Design
• Connector Type: Screwed
• Brand Name: CIM
•  :  

• Diameter: 18 mm
• Media: Air
• Brand Name: Hyva
• Material: Stainless Steel
• Product Code: 14780985
• Product Size: 1.5 Inch
• Surface Finish: Polished
• End Connection Type: Screwed

• Material: BRASS
• Brand Name: EUROBRASS
• Application: Water
• Valve Size: 1.1/2" INCH
• Place Of Origin: Delhi

We are offering ball valve. BRASS BODY STEEL HANDLE SIZES:- 14" TO 4"

SALIENT FEATURES:     Full Port   Blow Our Proof Stem   Low Torque   Floating Ball   Mirror Finish Ball   Quarter Turn Shut Off   100% Interchangeability   Variety of Material of:   S.S.ASTM, A 351, GR CF8 (304), CF3 (304L), CF 8M (316), CF3M (316L), CF8C (321)   CN7M (ALLOY 20)   ASTM 216, GR WCB (CAST STEEL)     APPLICATION STANDARDS     Mfg. Std. - BS 5351 Testing Std. - BS 5146 Product Range - 15 to 50 mm End Connection - BSP Female End / BSPT / NPT / BSP Female Ends