NSK Ball Bearings Dealers in Connaught Place, Delhi

• Features: Obtainable in two designs: single direction and double direction., High-Grade Balls — Silent and smooth process even at high speed., Optional seating rings take early misalignment.
• Size: According To Requirement
• Product Code: TBB

Angular contact bearings have one ring shoulder removed, either from the inner or outer ring. This allows a larger ball complement than is found in comparable deep groove bearings, giving a greater load capacity. Speed capacity is also greater. Barden's angular contact bearings have a nominal contact angle ranging from 10° to 25°. they can be used in pre-loaded duplex sets, back to back (DB), face to face (DF) for supporting thrust loads in both directions, or in tandem (DT) for additional capacity. Angular contact bearings support thrust loads or combinations of radial and thrust loading. They cannot accept radial loads alone. A single angular contact bearing can be loaded in one thrust direction only, this may be an operating load or pre-load. Separable and non-separable types are both available. Separable bearings are useful where bearings must be installed in blind holes or where press fits are required on the shaft and in the housing. The separable feature also permits dynamic balancing of the rotating components with the inner ring mounted in place without the outer ring and housing.

• Material: Bearing Steel
• Shape: Round
• Corrosion Resistance: Yes
• Tensile Strength: 505 MPa
• Hardness: 70 HRC
• Material Grade: 52100

• Brand Name: SKF,FAG,NTN ,KOYO & NSK

A ball bearing is a common type of rolling element bearing, ball bearings typically support both axial and radial loads and can tolerate some misalignment of the inner and outer races. Also, balls are relatively easy to make cheaply compared to other kinds of rolling elements. Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area that spherical shapes provide.

We are offering deep groove ball bearings. The deep groove ball bearings from dcdc have deep and continuous raceway grooves. They are various, self-retaining bearings with solid outer rings, inner rings, ball and cage assemblies. These products are made of simple design, easy-to- maintain, durable in operation. They are available in single and double row designs in both open and sealed variants. Due to the production technology used, the open bearings can still have turned breaks up on the outer ring for shields or seals. On the other end due to their frictional torque they are meant for high speeds.

• Material: Stainless Steel
• Shape: Round
• Bore Size: Upto 60 Mm
• Surface Finish: Polished
• Outer Diameter : Upto 180 mm
• Material Grade: SS304

• Material: Stainless Steel
• Color: Silver
• Surface Finishing: Chrome Plated
• Bore Size: 1 - 10 Mm
• Outside Diameter: 10 - 24 Mm
• Surface Treatment: Galvanized
• Price Range: 100 rs - 100000 rs

We supply an exclusive array of Ball Bearings including Single Row Ball Bearings that find application in a number of automobile industries. Known for their superior quality and durability, our Double Row Angular Contact Ball Bearings are manufactured as per the international norms and standard using high grade raw materials. Showcasing high performance, the Double Row Ball Bearings supplied by us effectively reduces the friction between moving parts. As one of the leading Suppliers, we extend our capability in offering these bearings in different sizes, weights, and dimensions etc as per the specified needs of our clients Click Here For Single Row Ball Bearing Click Here For Single Row Angular Contact Ball Bearing Click Here For Double Row Self Alighing Ball Bearing Click Here For Double Row Ball Bearing Click Here For Double Row Angular Contact Ball Bearing

• Material: SS
• Packing Type: Carton Box
• Pack Size: 1 Piece
• Brand: SKF, FAG, NFK, Nachi

• Bore Size: 70 mm
• Number of Row: Single Row
• Material: Bearing steel chrome steel
• Type: Bearing
• Application: Motor, Power tools, House hold appliances

Application : Paper industry Sugar industry Textile industry Cement industry Fertilizer industry Chemical industry Steel plants Thermal power plants etc.

High rotating speed High precision Low noise, small vibration Can take radial and axial load concurrently Can be used in pairs

Deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accomodate radial and axial loads in both directions. These bearings are particularly versatile and are:simple in designnon separablesuitable for high and even very high speedsrobust in operation, requiring little maintenanceDeep groove ball bearings are the most widely used bearing type. Consequently, they are available from SKF in many designs, variants, series and sizes.

• Number of Row: Double Row
• Hardness: 70 HRC

Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. The raceways of the inner and outer rings are offset in relation to each other in the direction of the bearing axis. The bearings are available in open and sealed versions. Their self-alignment capacity is very small. X-life Many sizes of angular contact ball bearings are supplied in X-life design. These bearings are indicated in the dimension tables. Bearings of X-life quality have an improved raceway geometry as well as optimised surfaces. This gives a significant increase in the fatigue limit load of the bearings. In calculation of the expanded adjusted rating life, values up to 50% higher are achieved. In certain applications, a smaller design of bearing arrangement can therefore be used if necessary.

• Feature: dimensional accuracy, optimum performance, high tensile strength, less maintenance, sturdy construction, durability, high functionality

• Brand Name: HCH
• Bearing Number: 626 2RS
• Material: Chrome Steel
• Application: Machinery
• Quantity Per Pack: 125 Pcs
• Steel Grade: SAE-52100
• Number Of Rows: Single Row

Ball Bearings A ball bearing is a common type of rolling element bearing, Ball bearings typically support both axial and radial loads and can tolerate some misalignment of the inner and outer races. Also, balls are relatively easy to make cheaply compared to other kinds of rolling elements. Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area that spherical shapes provide.

A ball bearing is a common type of rolling element bearing, Ball bearings typically support both  axial and radial  loads and can tolerate some misalignment of the inner and outer races. Also, balls are relatively easy to make cheaply compared to other kinds of rolling elements. Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area that spherical shapes provide.

We are offering ball bearings.

Self Aligning Ball Bearing, Spherical Roller Bearing

high dynamic load rating , optimal for applications with low to medium speeds and high external load.

ball bearing, Spherical plain bearings, Injection Moulded Plastic Bearing

Self Aligning Ball Bearing, ball bearing, Insert Ball Bearing, ball bearing

ball bearing, chemical equipment

Deep Groove Ball Bearings, Angular Contact Bearing, Thrust Bearings

ball bearing, Angular Contact Ball Bearings, Spherical Roller Bearings

ball bearing, WELDING CABLES, steel grip tapes, Grinding Wheel

ball bearing, Cylindrical Roller Bearings, Bushes