NSK Bearings Dealers in Mori Gate, Delhi

We introduce ourselves as an eminent trader and distributor of Needle Bearings. These products are manufactured at our vendorsa end with the best quality raw materials under the supervision of skilled technicians. This range of Needle Bearings is acknowledged for its high performance, corrosion resistance, high tensile strength, easy installation and enhanced durability. These are available in different specifications as per the precise needs of clients. In order to meet the international standards, these bearing are stringently tested on various parameters.  

• Material: Bearing Steel
• Shape: Round
• Corrosion Resistance: Yes
• Tensile Strength: 505 MPa
• Hardness: 70 HRC
• Material Grade: 52100

• Material: Stainless Steel
• Shape: Round
• Bore Size: Upto 60 Mm
• Surface Finish: Polished
• Outer Diameter : Upto 180 mm
• Material Grade: SS304

Dcdc is the distributor of pillow block bearings, industrial bearings including pillow block bearings. A pillow block bearing is also known as plummer block or bearing housing. It is a pedestal which is used to provide support for a rotating shaft with the help of compatible bearings and various accessories. The housing material for a pillow block is typically made of cast steel or cast iron. The pillow block bearings, flange bearings units and take-up bearing units all comprise of housing with a bearing mounted on it. They are available in variety of materials, bearing features and mounting configurations. Each mounted unit acts like a system to position the bearing securely for a reliable operation.

Backed by our team of dexterous professionals, we have emerged as trusted Suppliers and Exporters of Crossed Roller Bearings. The Bearings we make available are procured from known vendors in the market.  Bulk orders of these are processed by us as pre the specific requirements of the buyers. One can obtain these at nominal rates from us.

• Type: Radial Deep Groove
• Material: Stainless Steels
• Feature: High Dimensional Accuracy, Honing Raceways, Smooth Runnig, etc.
• Bore Size: 0.6mm, 2.5mm, 10mm
• Outside Diameter: 50mm
• Color: Silver

Buy excellence in the form of Ball Bearing at coffer-friendly prices, from us! We understand that high-quality standards should be maintained throughout the offerings. And, for attaining this objective, we make use of superior-grade raw material for manufacturing the same.

We are main supplier of this product.

Proven and renowned for offering greater reliability and durable performance, the comprehensive range of Spherical Bearings supplied by us is a consequence of advanced manufacturing capabilities of our reliable manufacturers. Capable of withstanding high radical load, our premium quality Spherical Roller Thrust Bearings is acknowledged widely for its excellent mechanical strength and enhanced lubrication. We offer these bearings in varied sizes, dimensions and weights as per the requisite requirements of our customers and thereby acquiring the status among the prestigious Double Row Spherical Roller Bearings Suppliers. Click Here For Double Row Spherical Roller Bearing Click Here For Spherical Roller Thrust Bearings

• Country of Origin: Made in India
• Material: Stainless Steel
• Packaging Type: Box
• Shape: Round
• Outer Diameter: 8mm
• Surface Finishing: Polished

• Type: Needle Roller Bearings
• Shape: Round
• Application: Machinery
• Color: Silver
• Surface Finishing: Non Polished, Polished

We sternly keep a check on the designing and manufacturing of products and ensure that the material is strictly procured from the leading names only. The raw material is examined on the grounds of quality to deliver the finest range of products. Known as the trustworthy suppliers, we are offering only the finest quality Ball Bearing at a reasonable price. Our Ball Bearings have a sturdy metal body with a polished surface and a long service life. 

• Material: Chrome Steel
• Weight: 1.2 kg
• Structure: Deep Groove
• Lubrication: Grease Or Oil
• Seals Type: Sealed
• Price Range: 100 rs - 100000 rs

• Material: Steel
• Usage/Application: Automotive Industry
• Bearing Number: F-572050.GEH
• Brand: FAG
• Model Name/Number: Tata GB60
• Product Type: Clutch release bearing

• Material: Stainless Steel
• Bore Size: 5 - 1400 mm
• Outside Diameter: 10 - 24 mm
• Structure: Thrust
• Surface Treatment: Galvanized
• Separable and interchangeable: The separable components of SKF thrust ball bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections.
• Initial misalignment: Bearings with sphered housing washer can accommodate initial misalignment.
• Interference fit: Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.

We bring forth an extensive gamut of Needle Roller Bearings, which is broadly used in Automobile Industry. Developed using modern machines and advanced technology, these Needle Roller Bearings are highly appreciated by our clients. We provide our Needle Roller Bearings at pocket friendly price. Specifications Truck and Trailer Wheel Bearings43031333116303143311830317580/572 33213593/592A 33215641/632 33217  665/653 32212665A/653 32213663/653 32214749/742 32215780/772 32217JH 211749/JH 211710 32218HM 212049/HM 21201132310HM 218248/HM218210 32311 HM 220149/HM 220110 32314 516849/516810 32318HM 518445/HM 518410

Tapered roller bearings are rolling element bearings that can support axial forces as well as radial forces. The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers. This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.

• Type: Spherical Roller
• Material: Stainless Steel
• Shape: Round
• Bore Size: 40 Mm
• Inner Diameter: 12 mm
• Diameter: 18 mm
• Surface Treatment: Polished

High rotating speed High precision Low noise, small vibration Can take radial and axial load concurrently Can be used in pairs

Shell type Needle Roller bearings are light-weight but are rates for heavy loads. They employ a Shell type outer ring made of thin special-steel plate which is accurately drawn, carburized and quenched , thus providing the minimum sectional height of the needle roller bearings The caged type has a structure in which  the needle rollers are accurately guided by the cage and thrust rings. It is useful for applications at high-speed rotations. Available in Sizes From Bore size: 3 mm to 60 mm  Inches Bore size: 3.969 (5/32") to 69.85 (2 3/4") Series mm: TLA (HK),TA (HMK) , YT (FJ) (full complement) Inches:  BA (SCE)  , BHA (SCH), YB (full complement) 

We manufacture, export and supply the top quality cylindrical roller bearings, in accordance to the high quality industrial standards. Our cylindrical roller bearings are known for simplifying the mounting and dismounting process. Offered with interference fits, our cylindrical roller bearings are widely used in fertilizer, chemical, and automobile industries. Our range of cylindrical roller bearings is totally separable except for those with complete design. Moreover, the diverse designs of our cylindrical roller bearings are changed by the lip arrangement. features robust constructionhighly durableefficienteconomical

Needle roller bearings are roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely suitable for bearing arrangements where radial space is limited. SKF supplies needle roller bearings in different designs and a wide range of sizes, which are appropriate for different applications.

• Brand Name: HCH
• Bearing Number: 626 2RS
• Material: Chrome Steel
• Application: Machinery
• Quantity Per Pack: 125 Pcs
• Steel Grade: SAE-52100
• Number Of Rows: Single Row

We offer a precision engineered range of Crossed Roller Bearings to our clients. These are a kind of roller bearings with cylindrical rollers that are long and thin in relation to their diameter. In spite of their low cross section, needle these bearings have a high load carrying capacity and are therefore extremely suitable for bearing arrangements where radial space is limited.we are Leading Supplier's, Trader's & Distributor's

We supply a complete range of Clutch Release Bearing for multifarious automobile usage, which is made of finest quality material for all Indian vehicles at competitive prices. Application: In modern gear box, gears are of helical type to provide smooth and quiet operation. However, it also produces axial thrust, which is accommodated by using these clutch release bearings that absorb such axial thrusts. Such bearings are also known as throw-out bearings. Clutch release bearing apart from supporting the clutch shaft also supports the axial load produced by the clutch.

• Number of Row: Double Row
• Hardness: 70 HRC

• Material: Stainless Steel
• Corrosion Resistance: Yes
• Number of Row: Single Row
• Type: Roller Bearing
• Packaging Type: Box
• Surface Finishing: Powder Coated
• Size: 2 inch

Ball Bearings A ball bearing is a common type of rolling element bearing, Ball bearings typically support both axial and radial loads and can tolerate some misalignment of the inner and outer races. Also, balls are relatively easy to make cheaply compared to other kinds of rolling elements. Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area that spherical shapes provide.

• Material: Stainless Steel
• Shape: Round
• Bore Size: 20 mm to 150 mm
• Type: Needle Roller Bearings
• Type of Bearing: Roller Bearing
• Bearings Rows: Cross Roller