Oil Fired Heaters Dealers in Delhi

We are offering coal fired thermic fluid heaters.Backed by a team of professionals, we are manufacturing of coal wood fired steam boiler that is widely used in various industries for steam boiling purposes. These are fabricated as per international quality parameters to provide clients with best grade product. In our range of steam boilers, the thermic fluid has a provision of being heated up to 320 degree celcius. Features: 1. It is circulated in a close cycle to the point of use where it gives up its heat before returning to the primary source for reheating. 2. The transfer of heat takes place at near atmospheric pressure as compared to a pressure as required by saturated steam at 300 degree celcius. 3. Safety provisions which results in drastic cut down on capital expenditure. 4. Thermic fluid used in the system is non corrosive & completely free from any suspended or dissolved solids, resulting in substantial reduction in repairing and maintenance cost.

• Storage Capacity: 260 L to 325 L
• CODE: COF-199 to COF-700

These oil-fired models are ideal hot water solutions for mid-sized commercial applications (up to I,40,000Kcalhr output).

We offer modern technology 4 pass oil fired hot air heater to our esteemed clients. Our 4 pass oil fired hot air heater is a compact, rigid, noiseless & fully automatic machine that comes with user-friendly features. Our 4 pass oil fired hot air heater is completely automatic on pre set temperature. financial benefits 4 pass oil fired hot air heater is economical at all the levelsmore than 50% saving as compared to electric heaterrunning cost much lower than thermic fluid & steam heating100% depreciation on 4 pass oil fired hot air heater in the very first year (as per the income tax rulelow operational and maintenance costlow initial cost as compared to thermic fluid heating salient features clean & critically controllable hot airhigh temperature models up to 150 clow temperature models up to 90 cthermal efficiency of 90% constructional features the fuel oil burner is a horizontal firing, pressure atomizing, forced draught type with direct electric spark ignition. The fuel oil pump with combustion blower is mounted on the burner casing on the front side of the unit. A fuel oil filter is mounted at a convenient position near the pump and is connected to the oil inlet port of the pump. All components of imported burners are from reputed companies like: parker (italy), landis & gyr (germany), monarch (usa), suntec (france), simel (italy). The electricals components used as : l&t, ngef/ siemens / cromption etc. higher temperatures more than 150 c also be achieved through recirculation of air space saver and can easily be installed with existing or new systemfully automatic to easy operation and virtually no maintenancealmost noise free thus does not disturb your work country wide service network our countrywide network of service centers take care of the systemto ensure prompt and quality service our qualified engineers are always ready to do their best technical specifications descriptionunitat – 25l low temp.at – 25h high temp.at – 50l low temp.at 50h high temp.heat output keal/hrkws25,0002925,0002950000585000058hot air temperatureoc8012015080120150process air flow at stp (1.2 kg/m3 air density)m3/hr1750975730350019451450temperature riseoc50801205090120thermal efficiency90% ± 2%fuel consumption (hsd)kg/hr2.755.5electric supply415 ± 6%. 50 hz ± 3%, 3 phase, 4 wireelectric loadkw1.752.5temperature controlautomaticdimensions (mm)w9151050l15001500h20002300

• Temperature: Upto 300ºC
• Fuel: Diesel
• Heat Output: 100,000 Kcal/hr to 50,00,000 Kcal/hr

Features :- Fully Automatic Operation Higher Efficiency Low Investment High workmanship. Ease of maintenance. Optimum heat transfer. Great operational safety. Space saving compact design. Regular after sales service.

We bring our premium range of Multipac Solid Fuel Fired Vertical Thermic Fluid Heater which is in high demand in the market due to its high performance and superior design. This heater is Fully Automatic and offers a choice in Installation and Operation (Vertical / Horizontal). All the components in the Multipac Solid Fuel Fired Vertical Thermic Fluid Heater are of reputed and quality assured make and we also offer Prompt Service and Spares Support. This heater we offer has high unit dependability and has a maximum outlet temperature of 300 Degree C. Features : Suitable for Multi Fuel (Husk /Firewood /Coal)Consistent Efficiency of 72%Long lifeProven design Built in Controls : Fluid Level Low : Magnetic level switch ensures minimum thermic fluid level in the department cum expansion tank.Fluid Flow Low : Different pressure switches ensure sufficient flow of thermic fluid across the coil and thus prevent coil chocking, over heating and coil failures.Outlet Templet High : Temperature indicator cum Controller prevents over heating of Thermic Fluid.Return Temperature High : Temperature Indicator cum Controller ensures Constant Temperature for the process and control ID & FD Fan Operation according to the set temperature.Spring Loaded Safety Valve Click Here For Technical Specifications

Wood Fired Thermic Fluid Heater is forced circulation liquid phase heating system. In this Wood Fired Thermic Fluid Heater, heat transfer media (Thermk fluid) circulated in a closed circuit through heat heater. The same thermic fluid is reheated and re-circulated. The combined expansion cum dearator tank system is pressure less and vapors less, which is one of the key features of these Wood Fired Thermic Fluid Heaters. The 3-Pass Construction unit also helps in operating near atmospheric pressure and temperature can be achieved as high as 3000C. The assembly of concentric helical tube coils, which are placed within a sturdy MS Shell, is also one of the remarkable features of Wood Fired Thermic Fluid Heater. The coils fabricated out of seamless tube high temperature. Application allow flue pass to ensure maximum heat dissipation. Technical Specfications : DESCRIPTIONUNITJBC TF-02JBC TF-04JBC TF-06HEAT OUTPUTKCal/Hr2,00,0004,00,0006,00,000FUEL CONSUMPTION (ON WOOD)Kg/Hr70150266ELECTRICAL SUPPLYAC-3 PHASE, 4 WIRECIRCULATING PUMP MOTORHp7.512.515Kw5.510.012.5FD FAN MOTORHpNil2.03.0ID FAN MOTORHp3.05.05.0Kw2.253.53.5TF PUMP SIZE (MODEL KSB)mtr3CPK - 32x200CPK - 40x200CPK - 50x200OUTLET TEMPERATURE (Rise)3000CTOTAL CONNECTED LOADKw7.715.016.5THERMAL EFFICIENCY%75% - 2%EXPANSION TANK CAPACITYLTR450600800DRY WEIGHT (APPROX)KG210030004500THERMIC FLUID INLET/OUTLETMM658080FLUE GAS OUTLETMM300x250400x330422x330 Note : We reserve the right to change any specification without prior notice. Click Here For More Information

Gas fired water heater, instant Gas Water Heater

fired heater, Air Heaters, Thermic Fluid Heater