Open Care System Dealers in Delhi

• size: Height 185 cm , Length 105 cm , Width 65 cm

Open Care System Diamond Series provide advance warming capabilities while using one touch operations .It comes with advance microprocessor controlled system with self-check on the electronic circulatory skin air manual control with higher accuracy and enhanced visibility.A big LCD display is provided for more information and Visualizations of the heater power in manual and servo modes. High Temperature Low Temperature , System Fail , Power Failure , Timer – On , Probe Failure , Heater Fail-On(Optional) , Control Panel :Open Care System Diamond Series comes with automatic manual and baby (servo) modes.

• Table Top Width: Table Top Width
• Width: 760mm
• Height: 1924mm

SST range of TianaTM- DX open care systems allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self check on the electronic circuitry skin air manual control.

The company presents family of radiant warmers to meet the diverse thermo regulatory requirements of patient at your hospital. V-800 Open Care System is designed according to the most recent international standards and provides the neonate with an adequate and secure environment of its care. This compact and mobile Open Care System with integrated phototherapy system is a must for every well-run and busy hospital. The integrated halogen based Phototherapy system ensures that optimum therapeutic output is available on demand to manage the hyperbilirubinaemia without disturbing the infant. Features The controller is based on Microcomputerized system.Large bright displays are easy to monitor and for viewing from a distance.Double digital display system provided to measure the Infant temperature and to set the required temperature.Feather touch keys provided for easy operation.Bar graph LED system provided to indicate the heater output.Manual control system provided.Fault Indications with alarm for Baby probe failure, 1oC temperature high, 1 oC temperature low, High temperature cut-off, Power failure The Electronic Controller The controller is based on Microcomputerized systemLarge bright displays are easy to monitor and for viewing from a distanceDouble digital display system provided to measure the Infant temperature and to set the required temperature Feather touch keys provided for easy operationBar graph LED system provided to indicate the heater outputManual control system providedFault Indications with alarm forBaby probe failure1oC temperature high1oC temperature lowHigh temperature cut-offPower failure Baby Probe Baby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software. The probe is made up of silicon sheathed cable, which allows easy cleaning Baby Tray The large baby tray is made of stainless steel frame with three side acrylic collapsible walls, trendelenburg & fowler system provided Observation Lamp A halogen based observation light focus on any area on the bed Heater Single element CE approved ceramic heater placed in a parabolic reflector Other Facilities Provision of Oxygen cylinderI V stand providedMonitor tray provided Physical Parameters Mattress Length :700 mmWidth : 500 mmThickness : 50 mmWorking level from ground : 1020 mmBaby tray is tilt angle on either side : +/-8 maxWeight Approx : :40 kgCastors : 100 mm with 2 brake wheels and 2 non - brake wheels Recommended Environmental Specifications Operating temperature range : 20oC to 33oCStorage temperature range : -25oC to 60oCOperating humidity range : 0 - 100% RH Skin Temperature Probe Range : 28oC to 38oCAccuracy : +/-0.2oC within rangeResolution : 1oCProbe interchangeability : +/-0.2oC (Servo)Heater output controllable from 0 to 100% in manual mode (continuously variable) Phototherapy Unit Supply to each lamp : 12V, 50WIrradiance : 6 - 8 µW /cm 2/nm at bed level Observation Light Halogen based Power required : 12V, 50 W Electrical Specifications Electrical Supply : 230V ± 10%, 50 HzPower consumption with Heater at max. output : 750W Power Consumption With heater, Phototherapy & observation lamps ON : 1250 W Electrical Safety As per IEC 60601-1-2 for medical equipments Note : Best results obtained if air convective current is low

Open Care Systems are widely used at hospitals and nursing homes to keep infants. These Open Care Systems is very spacious and come with a plastic molded drawer system for keeping consumables. These Open Care Infant Warmers are designed to provide advance warming capabilities while using one touch operations to simplify procedures.  We are a credible Manufacturer, Exporter and Supplier of Open Care System.   Dimensions : 103 x 80 x 184 cm (approx)   Weight  : 40 kg approx

Microprocessor-based System, featuring the spacious and silent remotecontrolled Motorized baby bed. A big plastic moulded drawer system for keepingconsumables. The system is equipped with motorized slow suction/ apgar timer/ &an oxygen delivery system.The control panel is also equipped with both audible & visual alarm system in theevent of Probe Fail/ Skin High/ Skin Low/ Power Failure/ Heater Fail.

Neonatal Resuscitation Unit, bone densitometer