P Lt Industries Pvt. Ltd. Pitampura, Delhi

We are offering single-row tapered roller bearings. Single-row tapered roller bearings consist of the cone assembly and the cup. It is usually fitted as one of an opposing pair. During equipment assembly, single-row bearings can be set to the required clearance or preload condition to optimize performance.

We are offering single row cylindrical roller bearings. Single row cylindrical roller bearings are classified by ribs as types of n0000 without ribs on outer rings and with double ribs on inner rings; nu0000 without ribs on inner rings and with double ribs on outer rings; nj0000 with double ribs on outer rings and with single rib on inner rings; nf0000 with double ribs on inner rings and with single rib on outer rings; nup0000 with double ribs on outer rings and with single rib on inner rings and also with end rings etc.

We are offering single direction thrust ball bearings have two washers, with grooved raceways. The curvature of the raceways is slightly larger than that of the ball. Out of two washers, one is shaft washer & the other one is housing washer. The bore of the shaft washer is of the shaft dia & the bore of the housing washer is slightly larger than that of shaft washer, to facilitate free rotation. These types of thrust bearings are mainly used where axial load conditions are too large to be accepted by radial bearings. They can accept purely thrust load in single direction & they are not suitable for speed applications.

We are offering four-row tapered roller bearings combine the inherent high-load, radialthrust capacity and directindirect mounting variables of tapered roller bearings into assemblies of maximum load rating in minimum space.

We are offering four-row cylindrical roller bearings have an extremely high radial load capacity, but no thrust capacity. This bearing type is mostly used in roll neck and work roll applications in the metal rolling industry. The production range is from id 90 mm to od 1250 mm.

We are offering double-row tapered roller bearings. Double or two-row tapered roller bearings feature double cups and two single cones. They are available in a variety of configurations for general industrial and automotive applications.

We are offering double-row cylindrical roller bearings offer added radial capacity over traditional one-row types. They are often used on machine tool spindles.

Double direction thrust ball bearings has three rings with the middle one (center ring) being fixed to the shaft.

We are offering cylindrical roller thrust bearings are designed to operate under heavy loads at moderate speeds. Special design features are available for even higher rotational speeds. Types include standard and aligning washer. Plt is capable to produce cylindrical roller thrust bearing from bore diameter 120 mm upto 1000 mm.