Perfect Polymers Ajmeri Gate, Delhi

thermoplastic sheets

Thickness : 0.1 mm to 20 mm

Material : HDPE

Size : Standard

We have carved a niche as one of the most reliable Manufacturers, Exporters and Suppliers of Polycarbonate Multiwall Sheets in India. These Polycarbonate Multiwall Sheets offered by us are light and UV resistant. Thus, these Polycarbonate Multiwall Sheets are ideal for glazing large areas such as carports, porticos, balcony roofs and conservatories. Apart from this, our Polycarbonate Multiwall Sheets can be used for greenhouses and Industrial buildings. These Polycarbonate Multiwall Sheets are extremely resistant to bending and weather proof. The clients can obtain these qualitative Polycarbonate Multiwall Sheets, at pocket friendly prices from us. Colors Available : ClearBronzeGreyBlueGreenOpal WhiteDiffuser White Non-standard Colors : against sample and subject to MOQ Available In Thickness : Twin Wall : 4, 4.5, 6, 8, 10mm thickTriple Wall : 8, 10 & 16mm thickX-Structure : 16, 25, 32, 35 & 40mm thickV-Structure : 20, 25, 32, 35 & 40mm thick Grades Available : Fire RetardantUV protection on both sides (UV2)Different colors on either sideAnti-condensation for high light transmissionSolar metallic reflective heat (Infra-red radiation) blockingPearlescent purple infrared reflective top layer for cool shadingDiffused white reflective top layer for greenhousesSee-through sheet with heat blocking Standard Sizes : 1220mm x 11800mm2100mm x 11800mm Other widths : 980, 1050, 1200, 1250, 1600, 1800, 1830, 2085, 2090 & 2095mm SpecificationsStructureThickness mmArea Weight Kg/m2I-Value W/m2 ºKTwin Wall40.83.84.513.761.33.581.53.3101.73Triple Wall81.72.91022.7162.72.3X- Lite162.62.1253.41.7323.71.6353.91.5404.11.4V-Structure202.81.85253.41.6323.61.6353.61.454041.35

We offer our Polycarbonate Modular Solid Glazing Panel System that has stylish looks and is easy to maintain. The Glazing Panel System is available in several specifications to suit the structure and the design. Our Polycarbonate Modular Solid Glazing Panel Systems can withstand high loads and so is preferred by clients everywhere. Components Bottom Profile : Kept on the base frame and fastened with self-tapping screwPanels with raised side collars : Polycarbonate Solid ModularTop Cap Profile : Placed over the Panel Collars and Fixed along with bottom profileCap Plug Profile : Envelops the head of self-tapping screw on top cap profileSelf Drilling and Tapping Screw : Stainless Steel Phillips pan head type screwEnd Caps : Stainless Steel Enclosures Used in Architectural projectsCommercial and retailSport venues roofingCovered walkwaysOpen marketsEntrancesPool covers Advantages Easy to installRetain their propertiesLong service lifeTransparentFree thermal expansionConsiderable sound/ acoustic insulation propertiesFree from Caulking and siliconeLow maintenanceWithstanding high loadsStanding seam leak-proof performance

Perfect Polymers is one of the most promising Manufacturers, Exporters and Supplier of Multiwall Polycarbonate Panel System based in India. The Multiwall Polycarbonate Panel System available with us consists of modular panels with snap-on connecting profiles (battens) made of polycarbonate. Thus, this Multiwall Polycarbonate Panel System ensures best performance for wind uplift, vibration, and visual appearance. Made using the best grade raw materials, our Multiwall Polycarbonate Panel System is resistant to thermal expansion thus, eliminates the need for penetrations through the sheet; hence the concealed fasteners make the structure 100% watertight. Features : Panel modular width is of 600mm for 8 & 10mm whereas 1000mm for 18 & 20 mm thicknessPanel is extruded in one single formable length. The panels are manufactured with up-stands which are integral to the unit and protruded 90 degrees to the panel face (standing seam dry glazed concept).The extruded panel includes integral tight multi-cell core. The panel's exterior skins are interconnected and spaced apart by structural core supporting ribs, perpendicular to the skins and diamond cuts (reinforced structure) for resistance to buckling, at a spacing not to exceed 4 mm (0.16 inches) (truss-like construction).Extruded U-profile snap-on battens (pc joiner/ connector) in same color as panel, fixed over the up-stands making them as interlocking in parallel arrangement and water leak-proof.T-Fasteners for side-ways control & T-Lock Fasteners in SS-304 (patented) controls the movement of polycarbonate panels for lateral movement rose by thermal expansion in concealed orientation. Benefits Of Multiwall Polycarbonate Panel System : 100% Leakage proofCost of Construction and installation is much lowerEasier and faster installationMore estheticalEnergy saving Ultraviolet Light Transmission (UV) : SUNPAL Polycarbonate Standing Seam Architectural System incorporates co-extruded protective UV layer on both sides of the polycarbonate panel. This layer acts as a barrier and helps to prevent degradation of the panel itself. Co-extrusion offers dramatically superior durability when compared to other types of UV protective barriers and ensures against de-lamination or oxidation. 99.5% of the sun�s harmful UV radiation is blocked by SUNPAL, resulting in a panel that is highly weather resistant, durable, and non-yellowing. SUNPAL polycarbonate panels should be used for open roof retractable structures or fully exposed exterior walls or partitions. UV protection prevents yellowing and helps maintain strength, impact resistance, and clarity over time. Condensation Control : SUNPAL polycarbonate panels have multi-cell air space and higher R-Factor, which reduces condensation formation. The multi-cell tempering of the air results in lower inside/ outside temperature differentials, both within the panel (the primary location of condensation formation on double wall panels), as well as on the underside of the panel. Reduced indoor/ outdoor temperature results in reduced condensation. When condensate is present, the droplets reflect light away from the glazing surface. By minimizing condensate formation, light transmission remains constant. SUNPAL Multi-cell minimizes condensate formation better than twin-wall by virtue of the fact that it has multiple air spaces (truss like structure) instead of one. General Insulating Information : Heat loss occurs when heat transfers from one warmer surface to another colder surface. As an example, if you were to put your warm hand on a cool ceramic tile for a few minutes heat from your body would begin to transfer to the tile and the tile would begin to get warmer. You could easily test this by removing your hand; touching another area of the tile and then quickly putting it back to the spot that your hand just warmed. During winter months, heat also transfers from the warmer inner surface of skylight glazing materials to the colder outer surface (assuming that the skylight is enclosed and heated). There are a few weather related elements that can accelerate the heat transfer process: wind, temperature, and humidity. SUNPAL Multi-cell polycarbonate panels increase energy efficiency by increasing the number of surfaces through which heat must transfer before it reaches the outside, as well as adding an air space in between the layers where heat can accumulate before it transfers through the next surface. The air becomes warmer within the air space, thereby slowing the transfer from the inner-most surface. Additional layers with inner additional air spaces will increase energy efficiency and reduce heat transfer. (Layers also affect light transmission, thereby resulting in translucent effect). The U-value of SUNPAL system is between 1.50 � 2.45 for 18/ 20mm to 8mm thick panel system. The U-value of SUNPAL system is far more less than any other system having more usage of thermal conduction elements, as in wet-connection fixing system (conventional multiwall sheet fixing with aluminum ALCOX profiles). Solar Control grades display excellent thermal insulation properties and thereby cutting the recurring power cost in higher change of temperature periods. Technical features : 100% Leakage proof, realized by unique U-connection and free floating system. It can withstand much higher force, like wind-loading, snow-loading, etc. Cost of Construction and installation is much lower. The U-connection lightens the building-load, can even adopt the self-supporting system.Easier and faster installation with its U-profile, comparing the traditional polycarbonate hollow profile sheet, less working skill and procedures are required. So that we can save labor cost & speed up the construction time. More esthetical, with Roof Panel skylight system, all of the raw materials for roofing are made of transparent PC. No need any screw, sealing aluminum profile and glue. The whole outlook can be complete transparent roofing with nice shapes. More safe, as the floating system, and also we use only one raw material: polycarbonate can avoid distortion from heating expansion. Energy saving, multi-cell multi-wall cellular hollow profile sheet can ensure better heat insulation, comparing with the traditional sheet, can save 20%-30% energy consumption.

We are a leading Manufacturer, Exporter and Supplier of Infrared Radiation Resistant Polycarbonate Sheets in India. Our Infrared Radiation Resistant Polycarbonate Sheets are specially manufactured using premium grade raw materials thus, making them durable and resistant to infrared radiations. These Infrared Radiation Resistant Polycarbonate Sheets have a considerable advantage over regular colored sheets. Standard colored sheets absorb most of the light energy, which is not transmitted through the sheets. Our Infrared Radiation Resistant Polycarbonate Sheets reduces heat buildup coupled with a 100% blocking of harmful UV radiation. Thus, these Infrared Radiation Resistant Polycarbonate Sheets are ideal covering for areas primarily makes used during the summer months. The clients can avail these quality-tested Infrared Radiation Resistant Polycarbonate Sheets, at most competitive prices from us. Lower the �U-Value� means; lower the heat loss amounting to higher the thermal insulation. Light Transmission (LT) is the percentage of incident visible light that passes through an object is one of the lowest, whereas Shading Coefficient (SC) is the amount of the sun�s heat transmitted through a given window compared with that of a standard 1/8- inch-thick single pane of glass under the same conditions is lowest in Solar Control grades. The more sheet resistance, more the thermal insulation (lower U-Value).

Thickness : 0.15 mm - 200 mm

Color : NATURAL, BLACK & COLORED

Brand Name : PERFECTEX PP / HDPE

Feature : THERMOWELDABLE, PRINTABLE, MACHINABLE, ETC.

Size : Standard

Material : POLYETHYLENE (PE) & POLYPROPYLENE (PP)

Country of Origin : Made in India