Pharmaceutical Processing Equipment Dealers in Delhi

• GREEN AND BLUE: BLUE

Product Description: We offer high quality COMPRESSION Testing Equipment in the market. The special design of Cement Autoclave ensures easy heater replacement, even by one skilled man. The Autoclave is suitable for conducting accelerated soundness test on cements by the autoclave expansion test requiring constant steam pressure with the corresponding constant temperature. It consists of a stainless steel cylinder with a heat insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The control unit consists of sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. General Description: Quadruple walled construction, Inside S.S. Boiler, air insulation cover, Glass wool Insulation cover and outer cover Inside chamber dimensions - 10.5 cm dia. meter x 40.5cm height suitable for operation on 230 V, 50Hz, single phase, A.C. Supply Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in vertical position to expose them in the same manner The Pressure gauge is with calibration report with national traceability. Length comparator and shrinkage bar moulds (single two triple gang) are available at extra cost

• Brand Name: ALE
• Material: Mild Steel
• Driven Type: Hydraulic
• Automation Grade: Manual
• Capacity: 50 to 2000 KN

In these load frames “C” channels are used, they are welded at the top as well as bottom and with stand high loads. A hydraulic jack is fitted at centre of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin. A lead screw passes through the top of the frame.  To the lower end of this lead screw is fixed the upper platen with spherical seat for self alignment. The platens are accurately machined, hardened and polished. The lower platen grooves to correctly place the specimen. Note:The platens are normally rectangular on shape, but no special request square platens or circular platens can be supplied at an extra cost. Ranges: 50 kN to 2000 kN

• Application: Concrete Compression Testing
• Power: 2 To 5 Kw
• Brand Name: Steco
• Material: Cast Iron
• Weight: 710 kg
• Display Type: Digital
• Phase: Single Phase
• Frequency: 50/60 Hz

• Material: Stainless Steel
• Country of Origin: Made in India
• Size: 8 Inch Height and 3 Inch Scoop Diamter
• Thickness: 0.1 MM
• Usage/Application: Multipurpose

The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts are made of stainless steel. It is composed of two truncated cones joined together by cylindrical section.   A tight closing lid of the fast closing type for feeding material and a discharge butterfly valve at the other end of the unit which also renders a perfect tightness. “The working capacity of the Blender is 65% of total volume” The blender is recommended preferably when the product to be mixed have a similar density and particular size as well as no lumping properties. Baffles are provided in bigger unit for intense mixing. The SLANT double cone design eliminates dead sports, which occasionally occur in conventional double cone mixer. It can be used for pharmaceutical, food, chemical and cosmetic products etc.   The blending time is around 10 to 20 minutes (approx) as a maximum   Application : Dry powder mixing for tablets and capsule formulations Dry granules sub lots mixing to increase the batch size at bulk lubrication stage of tablet granules.   Salient features : The conical shape at both ends enables uniform mixing and easy discharge. The cone is statically balanced to avoid any excessive load on the gear box and motor · While the powder can be loaded into the cone through a wider opening, it can be discharged through a butterfly or slide valve. Depending upon the product, paddle-type baffles can be provided on the shaft for better mixing inside the cone. The contact parts are made of either SS 304 or SS 316 Fame proof motor can be supplied as optional Capacity available 25 liters. To 1000 kgs Liters The working capacity can be exchanged to 80% of gross capacity by validated study depending on the product. 'Slant' designed (off centre Double Cone Blender is also available.

• Power Supply: AC
• Motor Voltage: 440 V
• Automation Grade: Automatic
• Phase Type: Three

Interested buyers can place orders with us, timely delivery of the same are our foremost concern. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts.   Available in : 100/150/200 ton hand operated. 100/150/200 ton Electric operated. 100/150/200 ton Electric operated with digital display.

• Voltage: 440
•  :  
• Motor Power: THREE PHASE
• Rated Speed: 2800
• Automation Grade: Automatic
• Capacity: 2 HP
•  :  

We are flexible in making deliveries in the committed time span owing to the well-organized and maintained transportation system. Owing to our association with the reliable vendors, we are able to obtain quality-approved and certified inputs. Thus, we ensure that our products are of unmatched quality.

• Country of Origin: India
• Certification: CE Certified
• Application: Industrial
• Color: Blue
• Voltage: 220V
• Driven Type: Hydraulic
• Warranty: 1 Year

200/Tones- hydraulic electrically-cum-hand operated, with 3 pressure gauges 0-200 tones, 0-100 tones, and 0-50 tones capacity complete with Flexure Test Attachment. MODEL DM/TG. Speed Control: The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand pumping in case of power failure. Electrical :This automatic closing of the machine shall protect the machine for overload resulting in ultimate damage. Electrical Relays are also incorporated in the electrical pumping unit, so that in case of breakdown of power supply the motor will not restart unless the starting switch is operated.The machine is also provided with a Hand-operated Pumping Unit, so that the unit can be operated Manually.

• Weight: 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
• Voltage: 110V, 440V
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw, 7-9kw, 9-12kw
• Driven Type: Electric
• Warrenty: 5 Years

We are a prominent Compression Spring Machine Manufacturer and Supplier in New Delhi, India. The Compression Spring Machine that we offer is mainly required for conical spring and barrel type spring. Fabricated utilizing the latest techniques, the Compression Spring Machines are the high-speed segment based device. Moreover, the initial starting load as well as magnetic clutch is lessened on focal motor shaft that results in better motor life of Compression Spring Machine. Attributes Low power consumption High functionality Assured accuracy precision-engineered Maximum Speed 200 pieces/minute Suitable For Wire diameter varying from 0.2 mm to 0.25 mm