Pile Integrity Tester Dealers in Delhi

• Features: Easy to operate, good quality, high strength

• Weight: 5 Kg (11 lbs.)
• Model No.: PDA-8G
• Display Type: Digital
• Grade: Automatic
• Condition: New
• Size: 320 X 250 X 68 mm (12.6 x 9.8 x 2.7 inches)
• Temperature range: 0 to 40 DegreeC (32 to 104 Degree F) operating; -20 to 65 DegreeC (-4 to 149 Degree F) storage
• Power:  100-240 VAC
• Charging time: 6-hour maximum

• Brand Name: SolGeo
• Temperature: 0-60 DegreeC
• Pulse Duration: Selectable,1 to 65000 us
• Voltage Out Transmitter: Selectable,100V to 1200V
• Transmitter Pulse Repetition: > 20 misure/second
• Recharging Time: 4h
• IP Rating: IP 65
• Autonomy: 0.8W Standby / 1.6W Ultrasonic active
• Travel Time Resolution: 100 ns
• Converter Type: 2 A/D x 12 bit converter
• Channel: 2 input / 1 transmitter
• Amplifier: 1 to 1024 software selectable
• Sample per Event: 1K to 8K for channel
• Bandwidth: > 1 MHz

• Weight: 1.24Kg
• Product Model: VS-P800
• System Noise Voltage: Less than 2 mV
• Dynamic range: More than 138dB
• Amplifier Band: 10Hz-10kHz
• A/D Resolution: 16-bit A/D
• Sampling time interval: 2us-32768us
• Sampling Length: 1024, 2048, 4096
• Time indication error: Less than 1%
• Channel Number: One
• Amplification factor: 1-128
• Data transmission mode: Wireless Cloud Transport (Options)
• Trigger mode: Signal triggering
• Sensor Sensitivity: 100 mV/g
• Sensor frequency band: 1-10000Hz
• Continuous working hours: More than 10 hours
• Power Supply: Built-in rechargeable lithium battery (+7.4V)
• Display: 640*480 Capacitance Screen
• Operational mode: Touch
• Size: 220x160x50

Provide a Pile Integrity Tester (PIT) or an equivalent equipment. The equipment shall have the following minimum requirementsThe analog to digital resolution shall be at least 24 bits. • The sampling frequency shall be at least 25,000 Hz. • Data shall be stored such that additional processing or further wave analysis is possible.

PIT performs Low Strain integrity testing, also called Sonic Echo or Pulse Echo Testing. The PIT may be used for auger cast-in-place (CFA) piles, drilled shafts, driven concrete piles, concrete filled pipes and timber piles.

pile integrity tester, Rebound Hammer, rebar detector, analyzer

Pile Integrity Tester / Impulse Response Test System, RTFO

Pile Integrity Tester- C312- ET, Bond Testers