Plastering Machine Dealers in Delhi

• IS: 4031-1968, 1344-1959
• BS: 4550

Concrete Moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a Mortar Vibrating Machine. Mortar Vibrating Machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.   Specifications : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft or within a distance of 25mm below it. The electric motor drives the shaft of the frame and thus imparts required vibrations to the mould. The frequency of vibration is 12000 ± 400 vibration per minute. Supplied complete with a 7.06cm cube mould and loose base plate, a time switch 0-5mins x 1 min and certificate of vibration.

• Weight: 60 Kg
• Material: Stainless Steel
• Usage/Application: Cement Plasters
• Capacity: 6000 SF/Day
• Model/Type: Gypsum Plaster
• Max Grain Size: 4 mm
• Minimum Order Quantity: 1 Piece

• Voltage: 220 volt
• Automation Grade: Manual
• Product Type: Cement Mortar Sprayer
• Usage/Application: Cement Mortar and Gypsum Spraying Machine
• Brand: Hulk Lokpal
• Heating Mode: No Heating required
• Features: Sturdy construction, Easy installation, Superior performance

automatic sponge cutting & welding machine indian machine.

• Type: Plastering Machine
• Application: Constructional Industry
• Color: Yellow
• Voltage: 220V
• Condition: New
• Automatic Grade: Automatic, Semi Automatic
• Driven Type: Electric, Mechnical
• Country of Origin: India
• Minimum Order Quantity: 01 Set
• Item Weight Kgs: 200kg
• Capacity: 600 sqm
• Model/Type: SWITECK INDIA
• Brand/Make: SWITECK INDIA
• Material: Sent & Cement

• Weight: 2.5 kg
• Usage: Industrial
• Material: Steel
• Dimension: 20*20*90cm

• Features: Low maintenance, Durability, Fine finish
• Item Code: BHI-MS-160

• Type: High-Pressure Gun AIR ASSIST
• Application: Wall Putty Sprayer
• Function: Wet Model Plastering Machine
• Applicable materials: Mortar Cement Water
• Capacity: 9L
• Weight:: 2.5 KG
• Dimension(L*W*H): 20*20*90cm

Service Provided: No overseas service providedKeyword: Cement Mortar Plaster Spraying Machine Gun

• Features: Low maintenance, Durability, Fine finish
• Item Code: BHI-MS-160

• Voltage: 220 V
• Automation Grade: Automatic
• Capacity: 50 Kg
• Phase: Single Phase
• Material: Mild Steel
• Rust Proof: Yes
• Surface Finishing: Paint Coated

• Voltage: 230 V / 50 Hz
• Weight: 191 kg

Spray plastering machine its small and handy dimensions and low weights. All pumpable dry ready-mixed mortars or materials, such as Cement mortars, Limeplaster, Gypsumplaster, Masonrymortars, Insultingplasters, Self-leveling floor screeds, etc.

• Voltage: 220 volt
• Automation Grade: Manual
• Product Type: Cement Mortar Sprayer
• Usage/Application: Cement Mortar and Gypsum Spraying Machine
• Brand: Hulk Lokpal
• Heating Mode: No Heating required
• Features: Sturdy construction, Easy installation, Superior performance
• Power of main motor: 5.5 KW
• Power of mixing motor: 1.8 KW
• Delivery capacity: 8 - 45 L / min
• Delivery pressure: 40 bar
• Maximum delivery distance: 0 - 100 m
• Maximum delivery height: 30 m
• Maximum aggregate diameter: 6 mm
• Hopper Volume: 130 L
• Mixer Volume: 120 L
• Feeding Height of Mixer: 128 cm
• Outlet Diameter: 50 mm
• Delivery pipe diameter: 35 mm
• Weight of delivery parts: 95 kg
• Overall weight: 400 kg
• Dimension: 2230 × 800 × 1440 mm

• Material: Stainless Steell
• Usage: Plaster

Mortar Cube Vibrating Machine, Accelerated Curing Tank, Cube Mould

We deliver Spray Plastering Machine, which has the hose length of 5 m. This machine is made in compliance with the set industrial standards. Its safety control system enables this machine to be more efficient.

We are offering Gypsum Plastering Machine, which is equipped with advanced power gear motor (380V) and stepping motor (220V). Our machine is made in compliance with the set industrial standards.

We make available, Cement Plastering Machine, which is manufactured using the high-quality zinc alloy material. Our machine is largely appreciated for its high tensile strength and high productivity.  

Auto Wall Plastering Machine, Sira Grey Granite

Mortar Mixer Machine, Pressure Gauge Tester, Point Index Tester Machine

Mortar Cube Vibrating Machines, Vibrating Machines, Mould Vibrating Machines

Mortar Sprayer Machine, Airless Sprayers, Roloc Pads, Interface Pads

Automatic Wall Plastering Machine

Mortar Spraying Machine, Electrically Operated Cube Testing Machine