Plate Load Test Equipment Dealers in Inderlok, Delhi

• Brand Name: Sand Absorption Cone

We are offering sand absorption cone. sand absorption cone and tamper:- used for determination the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate. specifications: the equipment comprises of a conical metal mould 1.5 inch dia at the top, 3.5 inch dia at the abse and 2.7/8 inch in height. A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter.

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

• Driven Type: Electric
• Warranty: 1year
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Material: Metal

The Direct Shear Apparatus is inclusive of Loading Unit, Shear Box Assembly, Shear Box Housing and Specimen Cutter as well as a set of weights. Being one of the most trusted Manufacturers and Suppliers of Direct Shear Apparatus, we offer the best grade apparatus that is hand operated. The Direct Shear Apparatus is used to determine the direct shear strength of soil specimens of 60 mm x 60 mm x 25 mm. Salient Features : High sensitivity compression proving ring cap of 200 kg Consolidation dia gauge 0.01 mm x 25 mm One strain dial gauge 0.01 mm x 25 mm One strain dia gauge 0.01mm x 25 mm Optional : Additional set of weights for normal stress of 5 kgcm2 Soil sampler for 60 mm x 60 mm specimen and test form pad of 50 Spares like porous stone for 60 mm x 60 mm size sample in pairs

The company has acquired an indispensable position in the markets as a manufacturer and supplier of sand pouring cylinder. The apparatus of the sand pouring cylinder can have effective results for the in-place determination of the dry density of the soil. Whether the grains are compact, fine or medium, the sand pouring cylinder can handle all types within the layers of 50 cm thickness and the cylinders are available in 100-200 mm.

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia. Specification:- The complete set consists of one each : Glass plate 20cm x 15cm having round ends Brass or stainless steel rod 3mm dia x 150mm long Flexible spatula 15 cm Set of 6 moisture containers Porcelain basin 150mm dia  Plastic wash bottle 500ml Note:- Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost.

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

Same as standard penetrometer but the unit is compact with timer to control duration of penetration. The instrument is provided with lead screw gear arrangement, Leveling screws, Spirit level and a digital preset timer

The striking element has a hemispherical face of radius 10mm made of hardwood, polyamide or similar material weighing 0.15kg. It is rigidly fixed to the lower end of a steel tube with an external diameter of  9mm and thickness 0.5mm which is pivoted at its upper end in such a way that it swings only in the vertical plane of the axis of the striking element. The axis of the pivot is 1m above the axis of the striking element. The design of apparatus is such that a force between 1.0 N and 2.0 N has to be applied to the face of the hammer to maintain the pendulum in a horizontal position. The appliance is held against a solid wall of bricks, concrete or the like, and the test apparatus is so arranged that the pivot of the pendulum is vertically above the point of impact of the hammer. The striking element is then allowed to fall form such a height of 250 mm. Three such blows are applied to every part of the enclosure which is likely to be weak, including handles, levers and the like, but excluding signal lamps and their covers if these do not protrude from the enclosure by more than 3mm or have a surface not exceeding 3 cm2. Lamps within an appliance and their covers are tested only if they are likely to be damaged in normal use.

A depression is made in the sample by a needle of a definite weight, which is measured in tenths of a millimeter and expressed, as penetration number. A standard needle penetrates vertically under surcharge weight of 50 gm into a sample under test temperature at 250C for 5 seconds of duration. This test determines the consistency and thereby the grade of the bitumen. The apparatus is available in two versions, Hand operated and Electrically operated with automatic timer. The apparatus consist of a cast aluminum base with an iron stand on which moves an aluminum arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0-400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weight of 50 gm. The Automatic model is supplied with automatic digital timer and electrical arrangement to carry out the test without need of stop watch and with great ease and accuracy, even by a layman. The following accessories and consumables are not part of the standard supply and are supplied at an extra cost Constant Temperature water Bath EIE-403/406 Enamel Tray Glass Thermometer Stop Watch Mechanical / Digital Electric Hot Plate Spare penetration needle Spare Bitumen Container 55 mm x 35 mm Spare Weight 50 gm   The above Instrument with some modification can also be used for testing of Grease / soil / food products and other similar materials for penetration test. The brass cone is used in place of needle for penetration. Variety of accessories is available for different application. Price and details on request.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

Water trough : Floating ring type of Consolidometer (Odeometer) cell assembly for 60mm dia x 20mm thick specimens complete with floating ring with two guide rings, pair of porous stones, pressure pad and cutting collar. Set of weights to give a pressure of 10kg/cm. sq. on 60mm dia specimens. Floating ring type of Consolidometer (Odeometer) cell assembly for 50mm dia x 20mm thick specimens complete with accessories as above

• Certification: CE Certified
• Color: Brown, Grey, Light White
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year, 2years, 3years
• Application: Soil Testing

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

• Used: for determining the fineness of cement in terms of specific surface expressed as total surface area in squarecentimeters per gram of cement.
• Spares and accessories: Packet of 12 filter paper discs. Non-perforated disc. Suction bulb.
• Model: ASI-502

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

We are offering bitumen testing equipment. Bitumen is the ingredient in constructing and it is essential to enhance strength. Bitumen testing equipment such as bitumen testing machine, ring & ball (softening point) test apparatus, ductility testing machine, standard tar viscometer, bitumen laboratory mixer etc. Every testing equipment is designed & manufactured with great level of precisely to meet requirements of different industries and their respective testing methods bitumen in particular is a mixture of organic liquids which are highly viscous, black, sticky, entirely soluble in carbon disulphide. This material is composed of highly condensed polycyclic aromatic hydrocarbons. For testing this bitumen on varied parameters.

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

Laboratory CBR Test Apparatus, Laboratory Shrinkage Bar Mould, Proctor Mould

automatic soil compactor, Digital Humidity Indicators / Controllers

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector

Soil Testing Equipment, Concrete Testing Equipment, Cement Testing Equipment

toxicity test apparatus, Halogen Acid Gas Test Apparatus