Plate Load Test Equipment Dealers in Karampura, Delhi

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

Soil Permeability Apparatus come with glass tubes of 75mm, bore tube is provided with over flow arrangement for constant head tests. The remaining tubes are used for falling head test.

• Used: for determining the fineness of cement in terms of specific surface expressed as total surface area in squarecentimeters per gram of cement.
• Spares and accessories: Packet of 12 filter paper discs. Non-perforated disc. Suction bulb.
• Model: ASI-502

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

The liquid limit device correlates the mechanical properties of the soil such as compressibility and low shear strength. Being a major manufacturer and supplier of liquid limit device, we offer a device that has a brass cup on adjustable brackets with a fall adjustment of 1 cm. The brass cup of the liquid limit device can be raised and dropped through cam action on a rubber base that has standard hardness. Having one casegrande grooving tool as well as one astm grooving tool along with a high gauge block (type a of is 9259), the liquid limit device is a complete setup of its own. Motorized model is also available.

• Weight: 10-50kg
• Color: White
• Warranty: 1year
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

The Shrinkage Limit is the maximum water content that causes no appreciable reduction in soil mass on the reduction of water. The Shrinkage Limit Set is used to determine such data and it can also measure the ratio and index of shrinkage as well as volumetric shrinkage. We are a highly efficient Manufacturer and Supplier of Shrinkage Limit Set, and the apparatus is made up of porcelain evaporating dish, shrinkage dish, glass cup, Perspex plate with three metal prongs, Perspex plate, flexible spatula and glass cylinder (25ml x 0.5ml) without mercury, and the mercury can be supplied in bottle of 500 grams.

We manufacture superior quality Slump Test Apparatus conforming to BIS –7320. The apparatus is widely used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. It finds applications in various industrial tests. Slump Test Apparatus is designed with precision to offer the maximum efficiency and high performance speed. We design our Slump Test Apparatus to cater to the varied specifications of the clients. Features The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts.A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base.A graduated tamping rod is used both for compressing the specimen as well as measuring the slump of concrete.The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. Working The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.

Bituminous surfaces exposed to varying temperature conditions undergo expansion & contraction. So an important characteristic of the binder is its ductility & the degree of ductility has an effect on the cracking bituminous surface due to traffic stress.The ductility of bitumen is expressed as the distance in centimeters to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions.

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

Endurance Test For Thermostat equipment specially designed to test life cycle of thermostat as per Indian and International standards.Used for Storage Water Heater (Geysers), Refrigerators and general purpose Thermostats The device consists of Digital voltmeter, Digital Amp. Meter Load as per requirement Temperature controller and safety devices.The thermostat is heated & cooled by TEC (Gas free) based system without the use of Compressor and Gas .The system is programmable to conduct maximum 30 cycles per hour and is also protected against the failure of thermostat.A unique Programmable Logic Controller is specially designed for presetting number of cycles, automated conditioning of Thermostat, Logging, Drain and various modes of operations pumps and solenoids control. There are also override controllers for conditioning bath temperature control. With latest technology up-gradation we have also developed this device with fully programmable logically controlled.

• Dimensions: 23"x15"x18"

Milky white and black screen fitted on a base board with diffused light arrangement overall dimensions are 23"x15"x18" high. A stainless upright with adjustable slide arm with clamp magnifier, main cord and plug.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

We are one of the prominent direct shear machine manufacturers, exporters, and suppliers, based in india. The direct shear test is carried out with an apparatus consisting of a square divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the section of the shear box. This force causes a shear failure along the junction between the box sections. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has v-strips on which the shear box housing rests. Our direct shear machine is suitable for specimens of size 60 x 60 x 25mm. ref. Standard is:2720 (part 13), bs 1377, astmd 3080 ordering information concrete permeability apparatus, 3 cell model for 100mm cubeconcrete permeability apparatus, 3cell model for 100mm cylinberconcrete permeability apparatus, 3cell model for 150mm cubeconcrete permeability apparatus, I cell model for 150mm cubeconcrete permeability apparatus, 3cell model for 300mm cylinberconcrete impermeability apparatus, 3cell model for 150mm cube as per dlnstd to enquire about the desired product(s), just check the box and then click inquiry now button which is provided below.

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

We are a top-notch Manufacturer, Exporter and Supplier of Proving Ring Penetrometer from Delhi, India. The Proving Ring Penetrometer is comprehensively demanded to determine the bearing capacity of the soil. The Proving Ring Penetrometer that we deal in comes with proving ring 1KN with extension rod & cone at its tip. The handle of Proving Ring Penetrometer is at the top for easy handling. It is perfectly pa ked by us in a qualitative wooden box.

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

automated test equipment, Electric Panel

CBR Test Apparatus Field Type, Material Testing Equipments

Scientific Instruments, vane shear test equipment, load frame apparatus

curing tanks, Gold Melting Furnace, Curing Tank

bitumen testing equipment, automatic soil compactor

soil testing equipments

Thermal Stability Test Apparatus, Sigma Digital Earth Resistance Tester

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector

SPIC Hot Deformation Test apparatus, ABT Meter

Halogen Acid Gas Test Apparatus, toxicity test apparatus