Plate Load Test Equipment Dealers in Karol Bagh, Delhi

Owing to our rich industry experience and knowledge in this domain, we have become an eminent Double Ring Soil Infiltrometer manufacturer, supplier and exporter. This laboratory instrument is widely used to determine the infiltration rate of water into the soil and the rate is determinate as the amount of water per surface area and time unit that penetrates the soils. Our well equipped infrastructure unit helps us to ensure prompt and hassle-free production of this Double Ring Soil Infiltrometer.

• Brand Name: AMK

This unit consists of a cabinet which houses the gear system and motor mounted on a sturdy angle iron base. The loading is done through the bottom loading plate which is carried on a lead screw. The advancement of this lead screw is secured against rotating by a sliding key. The top bracket is adjustable in height and carries a hexagonal adaptor for taking standard proving rings. The instrument is fitted with a motor operation on 220230 volts, single phase, 50 cycles A.C. supply.This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies.It gives directly the unconfined strength.

We are a Manufacturer, Trader and Supplier of Soil Cone Penetrometer. Our range of Soil Cone Penetrometer includes Pocket Penetrometer and Vicksberg Penetrometer. We provide Soil Cone Penetrometer to match up the specific requirements of our clients. Our Soil Cone Penetrometer is assured of good compressive strength. Soil Cone Penetrometer which we offer is used for determining the liquid limit of soils. Soil Cone Penetrometer is useful to obtain reliable and accurate results for those soils which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm. penetrates 25mm gives the liquid limit.

Backed by a team of expert professional associates, who are having years of experience in the domain, we are rendering salt spray chamber or corrosion test apparatus. The offered product-line finds it used in different industrial applications and are widely acclaimed for its reliability and durability. Apart from this, the offered range is offered at the most market-leading price. features: digital indicators cum controller/indicator digital timer (999 hours) humidity meter with sensor mist dispersion automizer drainage system heating system hanging provision/rack provision air regulator air filter fog collection unit

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

• Material: Stainless Steel
• Automation: Manual
• Usage/Application: Soil Testing
• Brand Name: Steco
• Usage: Dynamic
• Packaging Type: Box

Soil reinforcement is a recent and fast developing technique to improve soil behaviour for a variety of civil engineering works; e.g. earth retaining structures, slope stability, land slides protection works, pavement, etc.In order to utilise fully the strength of reinforcement material while transferring load and forces via soil or aggregate to the reinforcement, a correct assessment of the soil/reinforcement frictional relationship is essential. The frictional properties can be assessed by means of a shear box which is modified either to conduct a 'Modified Shear Test' or 'Pullout Test'. In the former test, reinforcement material is placed and clamped in the plane of shear with soil above the fabric, whereas in the later test, the fabric placed between the top and bottom shear boxes is covered on both sides with soil and is then pulled out to evaluate the frictional resistance. This interface friction measurement apparatus has been specially designed to evaluate both 'frictional' as well as 'pull out resistance' of soil reinforcing materials at a shear rate and drainage condition desired by the designer.The percentage passing of different fractions determines the porometry of the geotextile investigated. In the Hydrodynamic Sieving Method, the geotextile specimen, loaded with a certain quantity of glass bead fraction, is continuously rotated in a water trough, forcing the glass beads to pass through the geotextile openings. The apparatus consists of two test drums of 14 cm dia and 7 cm effective length with 16 nos. of 4 mm dia rods provided circumferentially at equal spacing to hold the geotextile specimen in position. Two troughs to contain the test drums are supported onhorizontal axis, facilitating free rotation and capable of being filled with distilled water to a level of 20 mm below the drum axis. The clearance between the trough and the geotextile could be maintained at about 40 mm.The apparatus is provided with a motor drive and a change gear assembly to enable rotation of the drums at a speed of 5 rpm to 30 rpm.For conducting the test, the geotextile specimen is cut and stitched to get a shape of 14 cm dia and 10 cm length to insert over the drum tightly, after immersing the specimen in distilled water for one hour, and secured by rubber 'O’ rings. After placing 50g of smallest size glass beads inside the drum, the lid is secured and the drum with the geotextile placed in distilled water to the desired level and rotated at 20 rpm for 1,500 cycles. In order to get the optimum filtration opening size, the drum is rotated at a speed of 5 rmp to 30 rpm for 250 to 2,500 revolutions. The percentage of beads passed through the geotextile by dry weight is determined. The test is repeated with increasing size of glass beads till less than 5% of the beads by weight pass through the geotextile.Details : Product Code: EKE 243 EKE 24201 Rounded Beads, made of glass, size 0.85 mm (passing 1 mm and retained at 0.85 mm) EKE 24202 Rounded Beads, made of glass, size 0.425 mm (passing 0.85 mm and retained at 0.425 mm) EKE 24203 Rounded Beads, made of glass, size 0.25 mm (passing 0.425 mm and retained at 0.25 mm) EKE 24204 Rounded Beads, made of glass, size 0.18 mm (passing 0.25 mm and retained at 0.18 mm) EKE 24205 Rounded Beads, made of glass, size 0.15 mm (passing 0.18 mm and retained at 0.15 mm) EKE 24206 Rounded Beads, made of glass, size 0.075 mm (passing 0.15 mm and retained at 0.075 mm) Accessory EKE 24301 Spare Drum

Located in Delhi, India, we are counted amongst the prominent Manufacturers, Exporters and Suppliers of Direct Shear Apparatus. Intricately designed using high-quality raw material under the guidance of our experts, the Direct Shear Apparatus we make available are high in demand in the international market. They functional smoothly and have robust construction and high durability. For price quotes, stay assured to get what’s the best in market. Highlights : The apparatus consists of : - EKE 10401 Shear Box Assembly Comprises of Type of Shear : Direct/Residual measurement Operation : Motorised Rates of Strain : 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, (mm/min) 0.01, 0.005, 0.002, 0.001, 0.0004, 0.0002 Specimen Size : 60 x 60 x 25mm Power Specifications : 220 V, 50 Hz, Single Phase, AC supply

We are the best provider of Sand Pouring Cylinder used in determining the density of soil. These cylinders are devised using high quality metal components and anti corrosive materials. They are also provided in customized size and thickness to meet diverse client requirements. These products are highly durable, accurately designed and provided to various construction sectors across the nation.   Features : High quality Best performance Economical range   Descriptions : Sand Pouring Cylinder is used to measure density of fine, medium, coarse grained soil. 100mm - 115 mm internal dia with conical fun net and shutter. Calibrating Container 100mm deep with flange 50 mm wide. Matal tray 300mm square x 40mm deep with 100mm dia hole at the centre. 150mm - Used to measure in situ density of fine, medium, coarse grained soil. Cylinder with 15500 dia and length 450 mm cylinder container metal tray hole in the center. 200mm - Sand Pouring Cylinder, 215 mm internal dia. with conical funnel and shutter calibrating container 200mm inner dia x 250 mm high with 75 mm wide flange. Metal tray 450mm square x 50 mm deep with a 200 dia hole at the centre.

• Condition: New
• Automation Grade: Manual
• Application: Soil Sampling

Soil Auger /Dutch Auger, one meter long with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting   Rs.4800/- Rs.3000/- Rs.2300/- Rs.1700/- Rs.1200/-Rs.1200/-   Soil Auger, Bucket design (Agronomical auger)with. 1 meter long extension rod , with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting     Rs.4800/- Rs.3000/- Rs.2300/- Rs.1700/- Rs.1200/-Rs.1200/-   Soil Auger,  Euro design with. 1 meter long extension rod , with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting     Rs.5500/- Rs.3500/- Rs.2900/- Rs.2100/- Rs.1200/-   Soil Auger, Post Hole type, one meter long with handle Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia Size 3.5cm dia EXTRA Extension rod, 1 meter long with screw type fitting   Rs.4800/- Rs.3000/- Rs.2300/- Rs.1700/- Rs.1200/-Rs.1200/- Rs.1200/-   Soil Auger, Screw type, one meter long with handle: Size:15cm dia Size 10 cms dia Size:7.5cm dia Size 5 cms dia Size 3.5cm dia  EXTRA Extension rod, 1 meter long with screw type fitting   Rs.5500/- Rs.3500/- Rs.2900/- Rs.2100/- Rs. 1800/-   Rs.1200/-   Soil Auger, Tube type, Appx 45cm long with 35cm vertical slit complete  with Extension rod 50cm long to make total length appx 1 meter complete with handle. Size 10cm dia Size 7.5cm dia Size 5cm dia Size 3.5cm dia Size 2.5 cms dia EXTRA Extension rod, 1 meter long with screw type fitting       Rs.6400/- Rs.5400/-    Rs.4600 Rs.4000/- Rs.3400/- Rs. 1400/-   Soil core sampler2 inch diameter  complete with handle and borer at the end 3”inch diameter  complete with handle and borer at the end 4” inch diameter  complete with handle and borer at the end Rs.4500/-   Rs.5400/-   Rs.6400/-   Gravel Auger dia apprx. 5” specially design for working in graveled soil.Complete with one meter extension rod and handle                            Rs.5400/-   Soil sampler ring for Bulk density of Soil : dia 53mm x 50mm height made of special alloy pack of 24 , in a box. Complete with one set of  Wooden hammer, Dolly(Ring) , SS spatula 4” with wooden handle, and a device ( as per design) to hit the dolly Rs.15600/-    

The apparatus is designed for conducting in situ vane shear test from bottom of a bore hole in saturated cohesive deposits for determining their in place shearing resistance. The equipment consists of a torque applicator assembly mounted on a base, a gear wheel, which is marked in degrees, holds a torque ring and is geared to a crank, the torque ring is a split ring & deforms as torque is applied & the deformation is indicated by a dial gauge. A calibration chart to convert dial gauge readings to torque force in kgs/cm2 is supplied. A pointer is provided. For registering the rotations of the vane, a detachable stand is provided to anchor the instrument an attachment to securely hold the string of rods is provided the equipments comprises of the following : Torque applicator assembly capacity 2000kg/cm2 with split proving ring & dial gauge 0.002 x 5mm complete with stand.

Avail from us a distinct variety of Water Testing Apparatus that is manufactured from quality components. The Water Testing Apparatus that we Manufacture and Supply is highly demanded for the efficient testing of water. This Water Testing Apparatus tests water on various quality parameters such as salinity.

Product Code: EKE 155 Standrad: Standard IS:2720 (Part 31)   EKE 15501  Loading Jack, with U-bracket, capacity 50 kN (5,000 kgf). This is specially designed for use with Field CBR test apparatus. It consists of a hand operated, two speed, screw jack fitted with a U-bracket. A hexagonal adapter is provided to fix a proving ring. A thrust bar, which passes through the U-bracket, is screwed on to a proving ring (supplied at extra cost) which protects the proving ring when the loading is eccentric   EKE 15502 Swivel Head, for the Loading JackEKE 15503 Penetration Piston, 50 mm dia threaded at the  upper end, to connect to the various lengths of extension sleeves, through a connectorEKE 15504 Extension Set, consisting of 1 length of 5 cm, 2 lengths of 10 cm, 1 length of 30 cm, 1 length of 50 cm and a length of 100 cm used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubingEKE 15505 Connector Set, consists of eight connectors for coupling the penetration piston and proving ring assembly, either directly or through extension piecesEKE 15506 Datum Bar Assembly, consisting of two stands and 1 m long BarEKE 15507 Adjustable Bracket, for mounting the Dial GaugeEKE 15508 Annular Metal Weight, 5 kg, 250 mm dia with 53 mm dia central holeEKE 15509 Slotted Metal Weight, 5 kg, 215 mm to 250 mm dia with 53 mm dia slot 2 Nos.EKE 15510 Slotted Metal Weight, 10 kg, 215 mm to 250 mm dia with 53 mm dia slot 2 Nos.   The use of the in-situ CBR apparatus in large road construction projects has increased considerably in recent years. This apparatus, mounted on a rolled steel joist cantilevered from the back of the truck or fitted to the underside of a mobile frame, can be used to determine the bearing capacity of soils quickly and efficiently. This method of testing in-situ, using piston penetration, is useful for determining the load carrying capacity in the field, when the in-place density and water contents are such that the degree of saturation is 80% or greater, when the material is coarse grained and cohesionless so that it is not affected by changes in the water content and when the material has been in-place.

• Housing Material ::  
• CRC/ MS sheet duly powder coated: Power Consumption :
•  : 220/230V AC supply 50Hz Single Phase
• Motor ::  
• 1/20HP motor good quality: Optional :
•  : Digital RPM meter/ Timer/ DC-Drive for low RPM (On Request)
• Illumination ::  

Designed for Floc formation Test in water treatment plant. Uniform Stirring of up to 6 samples simultaneously Variable speed 20-100 RPM Heavy duty 1/20HP motor with gear train mounted on a mild steel housing Supported by four rods on a bench. Stainless steel stirring paddlers with Adjustable height. Locking collars or stirring rods permit adjustment height of paddle height. Spacing of 6” (150mm) between rod permit use up to 1000ml Beaker. Applications : For Medical Institute Research Lab. & College, Water Treatment Plant

We manufacture and supply a wide range of California Bearing Value (CBR) Apparatus, which is useful in determining the relative bearing ratio and expansion characteristics under known surcharge weights of base, sub-base and sub grade soils for the design of roads, pavements, & runways. The CBR test is used extensively in selection of materials and control of subgrades.

Thermal Stability Test Apparatus is used to measure/ check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831.Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a thermostatically controlled heating chamber at specified temp. of 200°C ±0.5°C.New Model incorporates a specially designed heating block which eliminated use of expensive silicone oil as in a conventional model.

This instrument is used for determination and checking of bitumen percentage in bituminous mix, the mix is added with a solvent and dissolved bitumen is removed by centrifugal action.

This Equipment is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The compactor has been designed to simulate hand compaction as described in ASTM D1559. This apparatus automatically compacts the sample and stops after preset number of blows has been completed. The Compactor gives uniformly and accurately compacted marshal moulds for reliable testing. It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds. It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. with a free fall of 457 mm. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase.

Bitumen forms the chief ingredient for constructing a range of infrastructures, and efforts are made forever to enhance its strength. There are scores of bitumen testing equipments which carry out the job effectively. S.S.International endows its clients with some of the technically superior bitumen testing Instruments. Such equipments have been offered to meet up the requirements and needs of different industries for tests of varied products. We enjoy a competitive edge over the other market players on the basis of our ability to offer the customized products to a vast range of customers. Manual Pentameter, Digital Pentameter, Ductility Apparatus, heating oven, Kinetic viscosity bath, Flash Fire Point, Fross breaking Test Apparatus and Ring and Bell Test Apparatus are some of the bitumen testing equipments we provide to our clients.

KEWIL Ring and Ball Apparatus Ring and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc.

We offer to our customers a superior quality Universal Extruder Frame . The extruder frame is used for taking out soil samples compacted or undisturbed, from 100mm dia and 150mm dia cylinders such as Core Cutters, Proctor moulds, C.B.R. moulds etc.

leak test apparatus, industrial electric ovens, Ultrasonic Bath

A prominent supplier of huge range of Direct Shear Apparatus.

• Color: Blue
• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Usage/Application: Laboratory
• Packaging Type: Box
• Display Type: Digital
• Grade: Manual
• I Deal In: New Only
• Battery Backup: 5-6 Hours
• Testing Type: Soil Fertility, Heavy Metal in Soil, Soil Suitability

Water and Soil Analysis Kit (1072) • Measures pH, Conductivity,TDS, DO, Salinity, mV & Temperature • Turbidity measurement • Turbidity measurement • Available in 3 ½ digit LCD display

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial