Plate Load Test Equipment Dealers in Rani Bagh, Delhi

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Application: Industrial
• Color: Blue
• Voltage: 220V
• Finishing: Polished
• Warranty: 1 Year

IS-2720 (Part VII) It consist of a compaction Mould 100 mm DIA. X 127.3 mm height X 1000 cc volume complete with collar and base plate all steel construction.Rammer 2.6 kg X 310 mm controlled fall through a guide tube. Rammer 4.89 kg X 450 mm controlled fall for heavy compaction test as per IS-2720 Part VIII.

The apparatus comprises a sieving unit, which allows testing of a specimen with an exposed sieving area corresponding having 148 mm diameter with a supported Grid of 1.4 mm diameter and mesh size of (10±1)mm to support the specimen during the test to avoid excessive deformation having the nozzle for discharge of water Fixing on the acrylic sheet cover for viewing the sample during test. The complete set is provided with the pan which has the drain nozzle for collate the water after test.

SAT-1302 is suitable for all kinds of sealing tape, sealing tape, warning tape, carpet tape, electrical tape, protective film tape, wrapping tape, cutting tape, etc., as well as medical patches, adhesive labels, protection Film and other products, hold the stickiness test.

• Material: Mild Steel
• Automation Grade: Automatic
• Color: Blue
• I Deal In: New Only
•  :  

Flocculator is used to determine the percentage of the polymer in the water sample. It has gained common application in waste water treatment plants.

We are offering laboratory cbr test apparatus. The california bearing ratio (cbr) is a penetration test for evaluation of the mechanical strength of road sub grades and basecourses. The test is performed by measuring the pressure required to penetrate a soil sample with a plunger of standard area.

• Brand Name: Teleflex
• Display Type: Analogue
• Hardness: 50-55 HRC
• Tensile Strength: 440 MPa

Apparatus has a span of 100cm and rise 25cm. Both ends should have hinge but one of the ends should also be free to move longitudinally. A lever arrangement fitted at this end for the application of known horizontal inward force for measuring the horizontal thrust. Along the horizontal span of the arch various points are marked at equidistant for the application of load. This being a statically indeterminate structure of the first degree. A dial gauge with 25mm travel (with magnetic base)will be supplied with the apparatus. Mild steel apparatus will complete with a supporting stand and a set of weights

Portable Falling Weight Deflectometer   Loadman-II    This is a light portable device for the measurement of Deflections. The device is easy to handle and can be used on all construction sites and all materials under any condition. It makes possible to measure bearing capacity and compaction ratio of construction layers and constructions in places where other measuring devices cannot be used owing to their size or because of the necessity to use a lorry or a van as a weight and or transportation unit. LOADMAN is also provided with an internal memory and with a keyboard. The data can be transferred to PC via USB connection.   Measuring principle   The deflection caused by the load of a falling weight is measured by an accelerometer. The acceleration is double integrated and thus the deflection can be calculated. The measuring results are given as the maximum deflection, the calculated bearing capacity modulus E, the length of the loading impulse and the percentage (approx.) of the rebound deflection compared to the maximum deflection as well as the compaction ratio, that is the ratio of the second and further on deflections compared to the first measured deflection (effectiveness of compaction).   Range of use Technically the device can be used on practically all kinds of construction sites to measure bearing capacity and for compaction control on bound, unbound, and special layers; for example, on roads, streets, bridge sites, house building sites, in trenches, on sports fields (football, baseball, tennis, golf, athletics etc.) as well as for laboratory tests of various kinds of materials.   Specificatons Total weight: 16 kg Height:117 cm Diameter: 13 cm Diameter of loading plate(s): 132 mm, 200 mm and 300 mm (option) Falling weight: 10 kg Falling height: 80 cm Operating voltage: 27 V (3 × 9V batteries) Measuring range: 0.1-5 mm approx. Length of loading/unloading impulse: 25-30 ms approx.

• Features: Non corrosive, High tensile strengths , Strong construction

Falling Weight Deflectometer, Solar Road Safety Products, Axle Load Services