Jar Test Apparatus
Get Price Quote
Designed for Floc formation Test in water treatment Plant, Uniform Stirring of up to 6 samples simultaneously, Variable speed 20-100 RPM, Heavy Duty 1/20HP motor with gear train mounted on a mild steel housing, Supported by four rods on a bench Stainless steel stirring paddlers with Adjustable height. Locking Collars or stirring rods permit adjustment height of paddle height. Spacing of 6” (150mm) between rod permit use up to 1000ml Beaker.
Concrete Testing Slump Cone
1,050 Per Piece
Best Deals from Plate Load Test Equipment
Brazilian Test Apparatus
Get Price Quote
1 Piece (MOQ)
Standard Used : IS 10082-1982 Specification: The instrument is useful for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. A pressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field also. Optional Extras: Pair of jaws for samples dia (a) 60mm (b) 70mm (c) 80mm (d) 90mm (e) 100mm.
Slump Test Apparatus
Get Price Quote
1 Piece (MOQ)
Sand Absorption Cone and Tamper
Get Price Quote
Soil Infiltrometer
Get Price Quote
We are a trustworthy manufacturer of a wide array of Soil Infiltrometer, an instrument that is used for determination of infiltration rate of water into the soil. This rate is determined as the amount of water per surface unit and time unit that penetrates the soils. The rate is measured on DARCY law. In the inner ring, the measurement takes place through which water runs vertically. The instrument consists of two rings, driving plate, for inner and outer rings. The outer rings are used for preventing divergent flow in layered soils. Special Attributes : Dimensional flow of water Easy operation High durability Corrosion resistance Zero maintenance Consist of : 2 steel rings Hammer Floats Stainless steel Hammering cross Stopwatch
California Bearing Ratio
Get Price Quote
1 Set(s) (MOQ)
This unit consists of a cabinet which houses the gear system and motor mounted on a sturdy angle iron base. The loading is done through the bottom loading plate which is carried on a lead screw. The advancement of this lead screw is secured against rotating by a sliding key. The top bracket is adjustable in height and carries a hexagonal adaptor for taking standard proving rings. The instrument is fitted with a motor operation on 220230 volts, single phase, 50 cycles A.C. supply.This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies.It gives directly the unconfined strength.
Vane Shear Apparatus
Get Price Quote
Vane Shear Apparatus, which is provided by us, is used to efficiently execute Vane Shear test that is conducted for obtaining the needed specimens, especially in those cases where the sampling tube has become the main reason for disturbance. The Vane Shear Apparatus is used for conducting shear strength present in the specimen of soil. Specifications Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS Specificationss. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgscm sq., 4kgscm sq., 6 kgscm sq. & 8kgscm sq. complete as above in a wooden carrying case. Features Of Vane Shear Apparatus Accurate execution of vane shear testDiscounted priceCompactDurable
Standard Penetrometer
Get Price Quote
We are a delhi based manufacture and supplier of Standard Penetrometer. Standard Penetrometer Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading. We offer Standard Penetrometer to our customers at a leading market prices.
Automatic Marshall Compactor
Get Price Quote
This Equipment is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The compactor has been designed to simulate hand compaction as described in ASTM D1559. This apparatus automatically compacts the sample and stops after preset number of blows has been completed. The Compactor gives uniformly and accurately compacted marshal moulds for reliable testing. It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds. It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. with a free fall of 457 mm. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase.
Air Permeability Apparatus
Get Price Quote
Our company is engaged in manufacturing and supplying a wide range of Air Permeability Apparatus, which is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. It includes spares such consistency plunger, initial needle and final needle.
CORD GUARD FLEXING TEST APPARATUS
Get Price Quote
Cord guard Flexing test designed as per IS: 302, IS:366, IS:1293 and all the international standards How Test is Performed ? For guards which do not comply with the dimensional requirement of this clause, a sample of the guard, together with the cable or cord delivered with the appliance, is to be subjected to 5000 cycles of flexing. The guard is mounted in the appliance with 60cm to 100cm length of cord. With the appliance held stationary, the guard is flexed by moving the cord back and forth in a plane through an angle of approximately 90 degree and 180 degree. At the end of the test, The guard and the cord shall slow no unusual signs of abrasion or wear. Salient Features With standard weights With 6 digit preset counter
Automatic Marshall Compactor
Get Price Quote
KEWIL Ring and Ball Apparatus Ring and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc.
soil testing equipments
50,000 Per Piece
We are the main supplier of this product.
Jar Test Apparatus
Get Price Quote
Used for uniform stirring of samples. The unit is provided with speed regulator for variable speed, S.S. Stirring shafts with adjustable height, S.S. propeller, and tube light is provided at base for illumination. Six Test Set, for 1 lit capacity.
Thermal Stability Test Apparatus
Get Price Quote
SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.
Fume Hood
Get Price Quote
Obromax fume hood are to limit a person's exposure to hazardous andor unpleasant fumes. For worker protection, the laboratory fume hood is the most useful piece of safety equipment found in the lab. When used appropriately, fume hoods not only provide protection from toxic gases and vapors but also provide protection from unanticipated fires and explosions. Fabricated out of thick wooden board these are designed . Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acidalkali resistant tiles stainless steel and a small wash basin with connections provided for inlet and out let of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with flourescent light and a gas cock for gasair supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. To work on 220230 volts a.c. Supply. Working size- 2’x2’x2’ 3’x2’x2’ 4’x2’x2’ 6’x2’x2’
Blood Roller Mixer
2,300 Per Piece
Digital CBR Testing Machine
21,000 Per Unit
1 Box (MOQ)
Slump Test Apparatus
Get Price Quote
Salt Spray Chamber, Corrosion Test Apparatus
Get Price Quote
Backed by a team of expert professional associates, who are having years of experience in the domain, we are rendering salt spray chamber or corrosion test apparatus. The offered product-line finds it used in different industrial applications and are widely acclaimed for its reliability and durability. Apart from this, the offered range is offered at the most market-leading price. features: digital indicators cum controller/indicator digital timer (999 hours) humidity meter with sensor mist dispersion automizer drainage system heating system hanging provision/rack provision air regulator air filter fog collection unit
Split Spoon Sampler
Get Price Quote
Split Tube Sampler or Split Spoon Sampler is designed to take undisturbed soil samples using the drive weight method as per BS 1377. The split tube section is held together with a ball check valve head and a heat treated drive shoe.
leak test apparatus
Get Price Quote
leak test apparatus, industrial electric ovens, Ultrasonic Bath
Direct Shear Apparatus
Get Price Quote
automatic soil compactor, Air Entrainment Meter
Thermal Stability Test Apparatus
Get Price Quote
Thermal Stability Test Apparatus, Sigma Digital Earth Resistance Tester
Soil Testing Equipment
Get Price Quote
Soil Testing Equipment, Concrete Testing Equipment, Bitumen Testing Machine
Concrete Testing Instruments
Get Price Quote
Concrete Testing Instruments, Aggregate Stones, Cement, Testing Instrument
Two Hinged Arch Apparatus
Get Price Quote
Two Hinged Arch Apparatus, Length Comparator, Digital Water Level Recorder
soil testing equipments
Get Price Quote
soil testing equipments, Compression Testing Machines
Double Ring Soil Infiltrometer Kaizen Imperial
Get Price Quote
Double Ring Soil Infiltrometer Kaizen Imperial