Plate Load Test Equipment Dealers in Shakurpur, Delhi

The Apparatus is same as the above but for six stages. The unit is equipped with, acrylic water bath controlled by digital temperature controller winch is normally set at 37ºC and duly fitted with pump which recirculates the water thus maintaining homogeneous temperature. The acrylic water bath is The digital timer can be set ranging from 1 to 999 minutes add it "BEEPS" at the end of the set time. The unit is equipped with Digital setting of RPM as an optional which can be controlled from 25 to 150 RPM. The equipment is duly fitted with motorized lifting to facilitate easy operation of the stirrers' assembly. Digital dissolution rate test apparatus is equipped With 1. Digital RPM Indicator - Range 25 to 150 RPM 2. Digital Timer – Range 1 to 999 minutes 3. Digital temperature indicator – Range 30ºC to 50ºC.

We manufacture superior quality Slump Test Apparatus conforming to BIS –7320. The apparatus is widely used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. It finds applications in various industrial tests. Slump Test Apparatus is designed with precision to offer the maximum efficiency and high performance speed. We design our Slump Test Apparatus to cater to the varied specifications of the clients. Features The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts.A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base.A graduated tamping rod is used both for compressing the specimen as well as measuring the slump of concrete.The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. Working The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.

• Driven Type: Electric
• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC. The Apparatus Consists Of : A loading unit motorized with capacity 5000 kgf with two telescopic pillars and an adjustable cross head Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.08cm per minute, operated on 230 volts A.C. 1 no. compaction pedal with specimen mold holder 2 nos. compaction rammers, 4.5kg weight and free fall 45.7cm 1 no. breaking head assembly with provision to fix flow meter 3 nos. specimen mold 10.16cm i.d. x 7.6cm high with base plate and extension collar 1 no. kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate Accessories : Integral type proving ring capacity 3000 kg A dial gauge 0.01 x 25mm

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

he fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,’U’ tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube – 30cm long with rubber bulb. Optional AccessoriesAt extra cost Balance with 0.001 gm resolution Stop Watch with 0.5-second resolution Manometer Liquid Whatman Filter Paper Filter Punch

The company has acquired an indispensable position in the markets as a manufacturer and supplier of sand pouring cylinder. The apparatus of the sand pouring cylinder can have effective results for the in-place determination of the dry density of the soil. Whether the grains are compact, fine or medium, the sand pouring cylinder can handle all types within the layers of 50 cm thickness and the cylinders are available in 100-200 mm.

• Certification: CE Certified, ISO 9001:2008
• Application: Leak Testing
• Voltage: 110V, 220V, 380V, 440V
• Dimension: 300mmx320mmx425mm, 320mmx325mmx450mm, 340mmx330mmx475mm
• Power: 1KV, 2KV
• Driven Type: Electric
• Warranty: 5yrs
• Temperature: 0-50°C, 100-200°C

We are one of the leading organizations for providing Leak Test Apparatus that is in huge demand in the market. This product perfectly suits the clients’ needs and expectations as it features an ideal blend of advanced technology, high efficiency, and low operational cost. Besides, these apparatus bring satisfactory experience to the clients by performing at a high level.

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

• Type: Soil Testing Equipment
• Application: Paper Testing
• Weight: 10-50kg

Road Testing Equipment · Pavement Content Tester · Avantech provide wide range of road, runway, airport pavement testing equipment in India

Features Increase Productivity by Controlling Soil Acidity with soil tester Tests soil in 3 minutes Fertilize only when the soil can use it Get on the spot results without time lag No batteries or chemicals Reliable - Accurate - Portable Only 6.5" long - Weighs 8 oz. Complete with handy carrying case Added Feature - Moisture Test Circuit Press button and read % saturation of soil

Direct Shear Apparatus is meant to measure the shear resistance of soil speciman. It is the measure of stress that any soil sample can hold with respect of load. SpecificationCat. No. Capacity Specimen Size Type IL- 508 2kN Single Speed 60 x 60 x 25mm Manual

• Type: Lump Test Apparatus
• Certification: ISO 9001:2008
• Color: Grey
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1KV, 2KV
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

We are the main supplier of this product.

• Country of Origin: Made in India
• Brand: TANCO
• Voltage: 220 V

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

Water and soil analysis kit is based on advance electronic technology for water analysis, pollution control, laboratory analysis, soil testing etc. The complete unit is housed in a briefcase to work on battery rechargeable cum mains. Unit is supplied without O.R.P. electrode with instruction manual. (a) Six Parameters :(pH, Conductivity, TDS, ORP, DO and Temp) (b) Five Parameters : (pH, Conductivity, , ORP, DO and Temp) (c) Seven Parameters : (pH, Conductivity, TDS, Salinity, DO, Temp. and Turbidity)

toxicity test apparatus, Halogen Acid Gas Test Apparatus

SPIC Hot Deformation Test apparatus, ABT Meter

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector

CBR Test Apparatus Field Type, Material Testing Equipments