Plate Load Test Equipment Dealers in Tri Nagar, Delhi

• Dial Gauge:: 0.01 x 25 mm
• Material:: Stainless steel
• voltage:: 220V , 50Hz
• Usage:: Soil test
• Pressure Assembly:: 10 kg./cm2
• Power:: 0.75kW

Our Triaxial Shear Test Apparatus has high quality machines which guarantee long working life. With the assistance of our secure payment procedures including both Online and Offline Payment Processing, we are able to ensure safety of the payments with us. We are committed towards providing the world-class lot of products thus, check each and every product on different levels.

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Single cell Concrete Permeability Test Apparatus can be availed from us as per the requirement. It is used for determining the permeability of cement mortar and concrete specimens.  The Concrete Permeability Test Apparatus comprises of a brass gunmetal cell of squares cross section mounted on a stand. The pressure chamber of the instrument is connected to the cell through copper tubing and t-connector mounted on the stand. We provide our Concrete Permeability Test Apparatus with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure airline or by a compressor.   Details : Available for sample of size 150mm dia x 150mm high Available for sample of size 100mm dia x 100mm high

The CBR method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. It meets the requirements of BIS-2720 Part XVI and consists of Load frame. Our California Bearing Ratio Test Apparatus is designed with precision keeping in mind the needs of the clients, and are widely used for laboratories activities. The California Bearing Ratio Test Apparatus is made using high quality raw material, and is incorporated with many advantageous features. We make available California Bearing Ratio Test Apparatus with different speeds, and cater to the needs of the clients. Features Precision engineeredCustom manufacturedHigh performance rateHigh speed Available in Three speedSix speedTwelve speedThirty speed Specifications Hand operated Capacity 5000 kg.One CBR Mould 150 mm diameter and 175 mm high complete with base plate and collar 150 mm diameter and 50 mm high.One penetration Piston faces 50 mm diameter. Bracket.Displacer Block 148 mm diameter and 47.7 mm long.Surcharge Weight 5 kg and 2.5 kg with central hole and also slotted. Tripod Cutting collar.Proving ring, capacity 1000 kg.One diameterl gauge with least count .01 mm.California Bearing Ratio Apparatus Motorized Complete as above, but supplied with a motorized load frame with rates of travel of lead screw 0.025 mm/min.; 0.05 mm/min.; 0.0625 mm/min.; 0.125 mm/min.; 0.25 mm/min.; 0.5 mm/min.; 0.625 mm/min.; and 1.25 mm/min.Available in-Hand Operated, three speed, six speed, twelve speed and thirty speed.

• Brand Name: GLASSLABS

We offer Blood Roller Mixer. The”GlassLabs” Brand Blood Mixer which we provide is made up of high quality raw materials. It is shake-less and gentle mixing process that makes blood homogeneous. It is essential pre-process for perfect result of RBC, WBC and Platelets counting on Hematology Analyzer. It is a highly reliable product suitable for laboratories, blood banks, and biological institutions etc. Having high tensile strength and strong features, Our Blood Roller Mixer is highly in demand all over India and global markets as well. We are the well known Blood Mixer Manufacturers and Suppliers in India supplying and exporting to global markets and still raring to go places. Properties: • Body M.S. with Powder Coated. • Maximum R.P.M. 30 to 36 can be run on 230 ± 10% 50Hz-110v, 60Hz, AC • Mixing Time - 15 to 20 Minutes. • Four Nos. - Roller Size - Length 230mm. • Can be run with Six Nos. Loaded Vaccutainers (of 4ml) Or Bulb of 5ml x 15Nos.

• Material: Mild Steel
• Weight: 5 Kg
• Brand Name: Unique
• Country of Origin: Made in India
• Usage/Application: Soil Testing
• Finishing: Powder Coated
• Automation Grade: Manual
•  :  

• Frequency: 240 Volts
• Packaging Type: Wooden Box
• Application: Clean Room
• Brand Name: REW
• Material: Metal
• Finishing: Non Polished
• Shape: Rectangular
• Color: White
• Condition: New
• Application: Laboratory Use
• Size: 6ft
• Certification: ISO 9001:2008
• Type: Fume Hood
• Country of Origin: India
• Height: 5ft, 6ft
• Approx. Price: Platform Size

• Simultaneous rotating and rocking: Fast and gentle mixing
• Non-slip rollers: Low noise motor
• Durable plastic gears: Easy to maintain and clean
• Up to 80 RPM speed: Analog speed control
• Can be used in cold rooms or incubators: 5, 7 and 10 rollers

Featuring gentle and fast rotating and rocking actions, our Roller Mixers are perfectly suitable for mixing blood samples, viscous substances and liquid-solid suspensions. Non-slip rollers enable you to work with peace of mind and compact design makes the equipment easily fit anywhere in lab or even in field work. Both the BST/205RM, BST/207RM and BST/210RM roller mixers can run continuously for many hours unattended. These Roller Mixer systems come with maximum 40, 50 and 80 RPM of variable speed, which can be adjusted through rotary switch. There are three roller mixer models available with 5, 7 and 10 rollers. Choose the one that suits your needs. Roller length is 325 mm. These roller mixers can be operated with 220 Volts 50Hz.   These roller mixers are also known as Analogue Tube Roller, Test Tube Roller, blood roller mixer and Tissue Culture Roller. Our company is a leading roller mixer manufacturer in India and supply roller mixers to all over India at great price and also export to all over Asian, African and Middle East countries. Request A Call Back Name: * E-mail: * Company: * Phone: * Message: *  

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

• Material: Metal
• Application: Industrial
• speed: 20 to 180 RPM
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Flocculator has been specially designed for use in water treatment plants to correctly estimate the Dosing of alum and such other coagulants for treatment of water and sewage. In provides identical Test conditions for all samples. Illumination base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc samples. Flocculator consists of heavy duty DC DRIVE variable speed motor heaving speed from 20 to 180 RPM with built in speed control. Stainless Steel Stirring rods are provided with adjustable spacers to adjust the depth of stirring Paddles. The stirring shaft can be removed without disturbing other stirrers. The unit is supplied without beakers to work on 220230 Volts A.C.

This is apparatus is used to determine softening point of bitumen, Ring and ball apparatus is used to determine softening point. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia.-steel ball, drops at a distance of 25mm. The apparatus consists of steel bracket with a sliding plate support. That support has two holes of 10mm dia. on which a Ring and Ball guide can be kept. A central Hole on this plate is for inserting thermometer. Supplied with a glass beaker approximate 8.5cm I.D., 12cm high and a hand stirrer and 2 nos. 9.5mm dia. steel balls.

he fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,’U’ tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube – 30cm long with rubber bulb. Optional AccessoriesAt extra cost Balance with 0.001 gm resolution Stop Watch with 0.5-second resolution Manometer Liquid Whatman Filter Paper Filter Punch

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

It consists of a vertical pillar mounted on a base, the head, together with diameter plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. The dial is graduated in 400 110 and the millimeter subdivisions Supplied with a penetration needle, ring weights. and two sample containers

This test is necessary for drainage application. The permeameters can be of parallel flow or radial flow type. In either case, flow occurs along the plane of the permeameters. In the apparatus, flow occurs radially outwards, from a central hole to the periphery of a circular specimen. The transmissivity is defined as the volumetric rate of flow per unit width of geotextile and unit hydraulic head. SpecificationsFlow: Radially outwards Specimen diameter: 100 mmRange of Pressure: Upto 800 kPa Head of Water: Upto 30 cm OptionalOverhead TankLoading unit, 300 kPa capacity SGE-1012 Thickness GaugeThickness is one of the basic physical properties used to control the quality of many geotextiles and geosynthetic. This equipment is simple to operate and thickness of the geosynthetic / reinforcing material can be measured with an accuracy of 0.002 mm for thickness upto 10 mm. Accuracy is 0.01 mm for thickness greater than 10 mm. Simple mechanism is provided to apply desired foot pressure varying from 1 to 10 kPa as per various international standards. Surface plate is grounded and is rust free to enable reproducible results. SGE-1013 Universal Testing System for GeotextilesThe evaluation of the tensile properties of geotextiles is of paramount importance not only in reinforcement application but also in all other uses. Important properties include stress-strain behaviour, ultimate strength in uniaxial tension (under different widths), creep, etc. Recent researches have made it clear that the measured stress-strain behaviour of geotextiles is significantly influenced by details of testing procedures like method of gripping the fabric, rate of deformation, sample size / aspect ratio, initial preload and fabric conditioning. Universal Testing System for Geotextiles enables determination of these properties under a variety of test conditions. The 100 kN capacity systems have speed ranges from 5 to 320 mm/min. The following attachments are available for this system at extra cost. SGE-1014 Universal Testing System for Geotextile with Digital Indicater SGE-1013001 Narrow and Wide Width Tensile StrengthTwo clamping systems 8 cm wide and 22.5 cm wide are mechanical wedge type and facilitate conducting Narrow Strip and Wide Width Tensile Strength tests as per many international specifications, viz Indian, British, ASTM etc. These grips allow simple and rapid sample loading. Roller type grips required in high strength geotextile testing can be supplied as optional extra. SGE-1013002 Grab Tensile Strength TestThis test measures the ability of the geotextile to distribute concentrated loads. Specially devised clamps (25 mm wide) with a gauge length of 100 mm are placed across 200 mm square samples or 200 mm x100 mm samples. The sample is then subjected to tension at a specified rate until failure occurs. It is widely used by manufacturers as a quality control tool and as such is the most commonly reported tensile strength value. It can also be used for relative comparisons between geotextiles of the same type. SGE-1013003 Trapezoidal Tear Resistance TestGeotextiles can be cut or punctured during field installation, which can create a possible condition by which strength is controlled by a tearing resistance. In the method suggested by ASTM-D4632, an outline of an isosceles trapezoid is marked on a rectangular specimen (150 mm x 75 mm) cut for the determination of tearing strength, (with a 6 to 9 mm cut) and the non-parallel sides of the trapezoid marked on the specimen are clamped in parallel jaws of the Tensile Testing System. Thereby, the separation of the jaws is continuously increased with simultaneous recording of the load, so the tear propagates across the specimen. The tearing strength is the value for estimating the relative tear resistance of different geotextiles or different directions of the same fabric SGE-1013004 CBR Push Through TestIn this test developed in West Germany (DIN-54307 E), fabric is clamped to give an inner diameter of 15 cm and a standard CBR plunger is pushed centrally through a fabric at a specified rate. The load at failure is the push through load and when divided by the cross-sectional area of the plunger, gives CBR push through resistance. This gives the resistance of fabric to withstand localised pressure, which is particularly noticed in pavement systems.

• Features: Rugged construction, Easy to use, Compact design, High functionality, Longer functional life, Durable .
• Weight: 3.5kg
• Speed: 36 rpm
• Load Capacity: 9 tubes
• Motor Type: sryrinconised
• Brand Name: pacific

• Used For: determining the slumps of fine aggregate in the determination of bulk and apparent specific gravity and absorptionof fine aggregate.
• Model: ASI-541
• Dimension: 1.5inch dia. at the top, 3.5 inch dia. at the base and 2.7/8 inch in height.

• Certification: CE Certified
• Color: Brown, Grey, Light White
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year, 2years, 3years
• Application: Soil Testing

The company is primarily engaged in the manufacturing, exporting, and supplying the highest-grade marshall apparatus in all across the globe. Our marshall apparatus is highly acclaimed by the national as well as international clients, for their excellent efficiency and working life. The marshall apparatus can be availed at the most competitive prices from us. description marshall load frame cap 50kn speed-50.8mm/min : 1 nobreaking head stability mould : 1 nocompaction mould steel, cylindrical : 3 nobase plate : 3 noextension collar : 3 nocompaction pedestal & manual operation, comprising steel : 1 noplate capped on a wooden post. A mould clamp is hutted to the top of the platecompaction hammer for use with compaction pedestal and 2 no. Mould, weight 4.5kg with a free fall of 457mmload transfer bar : 1 no

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6