Pollution Control Machines Dealers in Hari Nagar, Delhi

• Country of Origin: India
• Thickness: 5-10mm
• Length: 5-100mtr
• Feature: Scratch Proof, Perfect Finish, Optimum Performance
• Condition: New
• Brand Name: Tata

Power Master” Introduces new concept of Dust Collector with Coolant arrangement, specially designed for use with Surface Grinders. Equipment includes a combo design wherein dust collector used for collecting dust from dry grinding process and Coolant arrangement for wet grinding can be used intermittently as required. A separate suction inlet is also supplied for mounting on surface grinding machine, which buyer can install to connect with flexible pipe to dust collector. Features • Dust Collector with Coolant Combo aesthetically designed in a compact size. • High Filtering Efficiency for fine dusts. • Low noise & power consumption. • Cotton filtering sleeves provid security against file hazard. • Total Security with cotton filtering sleeves (Non-inflammable). • Standard Accessory: Suction inlet for mounting on Surface Grinder. Optional Accessory 1. DOL Starter 2. Dust Guards as per job requirement

• Type: Wet Scrubber
• Power: 3.7KW - 200KW
• Voltage: 220 V
• Power Source: Electric
• Automation Grade: Automatic
• Material: ABS
• Air Velocity: 8.7m/s
• Frequency: 60 Hz
• Capacity: 5000-40000 CFM
• Fan Speed: 1299 rpm

• Automatic Grade: Semi-Automatic
• Power Source: Electric
• Operating Voltage: 220 V-440 V
• Body Material: Mild Steel
• Corrosion Resistance: Yes

• tea bags: tea bags
• quality: best

We are narayan herbal manufacturer of herbal tea bags,ctc tea bags,flavour tea bags,fruit tea bags,green tea bags,slimming tea bags,macha tea bags,jasmine tea bags,stamina tea bags,memory tea bags,antidiabetic tea bags,customised tea bags,tea sticks.

• Color: Orange
• Voltage: 380V
• Supply Ability: 10 Piece/Pieces per Month
• Pipe Dia: 45mm
• Brand Name: SURIE POLEX
• Model Number: Dust Collector-5HP,3Phase
• Place of Origin: Delhi, India
• Pressure: 300m bar
• Motor: 5HP, 3Phase

• Made Of A-1 Kanthal Wire (14 Gauge) For Primary Chamber & (17 Gauge) For Secondary Chamber.: Strong Insulation Is Done With Combination Of Insulating Bricks & Silicon Fiber Insulating Blanket To Avoid Any Heat Loss.
• It Is Portable In Nature, Which Can Easily Placed In A Small Space In A Corner Of Building.: Works On Thermal Destruction Using Controlled Combustion Chamber; Combustion Is Controlled And Provides Enough Heat To Destroy The Waste Into Disposable State.
• Fitted With Hinges & Handle For Proper Sealing To Avoid Heat Loss.: Temperature Of Primary/Burning Chamber Up To 850 Deg. C And For Secondary Chamber 1000 Deg. C.

Portable Incinerator Is Most Effective Bio-Medical Waste Treatment Equipment For Every Small Nursing Home, Blood Bank, Veterinary Hospital, Poultry Farms. The Unit Is Designed For Quick And Safe Disposal. Working Principle: Furnace Type Associated With Burning Refuse. Used Simple Brick -Lined Enclosures.

• Surface treatment: Polished
• Body Material: SS and Plastic
• Number of wheel: 4
• Capacity: 60 Ltrs. Each Bin
• Dimension: 820x850x490 mm
• Features: Easy collection of segregated waste, Easy removal of bins for cleaning.

• Type: Ozone Generator
• Power Source: Electrical
• Voltage: 230 V / 50 Hz
• Weight: 2.25 kg
• Warranty: 3 Year
• Power: 65 W
• Brand: German
• Ozone Output: 5000-10000 mg/hour
• Product Dimension: 17.5 x 21 x 20 cm
• Automation: Automatic
• Oxygen Flow Rate: 5000-10000

PECMA vertical packed bed scrubbers are equipped with a very efficient contact zone, a gas distribution section, a liquid distribution system and a mist eliminator. The specially designed gas distribution section ensures even distribution of gases over the entire cross-section of the tower. The highly efficient liquid distribution system combined with an even gas flow ensures a very intimate gas-liquid contact. The mist eliminator section effectively removes the carry over of liquid droplets from the contact zone. Packed Bed Scrubbers offer very high collection efficiencies at comparatively lower pressure drops. The effluent liquid can be recycled in this process. Packed Bed Scrubbers are used to remove corrosive fumes and toxic gases like sulphur dioxide , chlorine hydrochloric, hydrofluoric ,hydrogen sulphide, phosphatic acid , cyanides ammonia and other organic and inorganic gases etc. Outlet Emissions are Even Less Then 1 Ppm. Can Be Achieved. Desulphurization This system uses the principal of gas and solid chemisorption technique for the removal of toxic gases like hydrofluoric acid, So2 etc. The system usually consists of gas-solid reactor followed by a fabric filter for collecting reaction products. This system is specially suitable for removal of particulate and gaseous fluorides from pot gases in an aluminum smelter and also for cleaning exhaust gases from refuse/chemical incinerators. Industrial Ventilation and Clean room systems equipments mainly Air shower, Air washer, Centrifugal fans.

• Application: Industrial
• Pressure: High Pressure
• Phase: Single Phase
• Power Source: Electric Blower
• Blade Material: Cast Iron
• Voltage: 240 V
• Mounting: Floor

Develop Lot of System for air pollution control under guidance of Mr. O. P. karwal like, Scrubber, Multicycle dust collector, Bag FIlter & ESP. We leverage our experience and expertise to apply the appropriate technology to each customer’s air pollution control requirements. Technology is selected targeting the lowest total cost of ownership (balancing initial capital cost with on-going operating cost) while insuring discharge limits are achieved. Our performance guarantee instills confidence that our engineered solution will exceed emission goals.

Wet Scrubbers are used in chemical process and hazardous fumes. Available type of Scrubbers: For only fumes straight inlet packed type wet scrubber is used where spray take place by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with fine dust/powder, ventury type inlet wet scrubber is considered where the fine dust/ powder get mixed due to high velocity and pressure. Spray system is also considered by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, ventury type inlet wet scrubber is considered where the dust/ powder get mixed due to high velocity and pressure .Spray system is also considered by re circulation of the water from other reservoir since existing water cannot be re-circulated due to slurry formation, while over flow water can be used to the other reservoir for re circulation. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, straight inlet wet scrubber is also considered static water reservoir, where the fumes with dust get in contact with water reservoir and dust particle are settled under the reservoir as slurry and fumes without dust get exhausted via M.S water eliminator.

We are well known Manufacturers of Incinerators, which is Environmental friendly Fitted with imported burners,

• Usage: Polypropylene and Polyester materials meet FDA regulations for food contact under CFR21, Section 177.1520
• Diameter (inch): 7.0/17.8,7.0/17.8,4.0/10.2,4.0/10.2
• Filter Medium Material: MEMBRANE MATERIAL ‘PE’ : Polpropylene ‘PO’ : Polyester ‘HT’ : High Temp 5 ; 100 ‘TE’ : TEFLON 10 ; 125 '4': 4” X 14” ‘N’ : Nylon
• Length (inch): 16/40.65,32.0/81.3,8.25/20.9,14.0/35.5

• Micron ratings from 1 to 200 • All industry standard & custom sizes available • Broad chemical compatibility • High flow/low pressure drop • Sewn or fully-welded construction • Handles on all bags • Choice of steel or molded plastic snapseal rings • Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®

auto air cleaner, Filter, Plastic Dies, Plastic Injection Moulding

All seasoned wood, commercial ply wood, heavy gauge mild steel square pipe (ERW 18 SWG) for frame and supports etc, inside and outside affixed with white Laminate, lower portion with drawers and cup-boards. Fume chamber with 5-6 mm thick Acrylic Sheet (Transparent) Sash with counter-weight balancing technique which enables to adjust the Sash at any level from the work table. Exhaust Flange of 200 mm. dia fitted at the top.

JATINDERA BOILER COMPANY is a reliable name, which can be trusted for the manufacturing and exporting of Waste Incinerators. These Waste Incinerators are precisely engineered by experts, which are hugely demanded by clients. It can be used in Hotels, Embassies, Govt. Offices, Banks, Hostels, and in research of animals. Construction : Package type and Incineration is batch type All weather type and mounted on base frame for easy transportation Waste feeding is manual Incinerator has 2 chambers Primary chamber Secondary chamber Both chambers are provided with pressure jet burners for incineration of bio-medical waste For general waste burner is provided only in primary chamber The primary chamber is provided with air pressure nozzles Cyclone separator is provided and mounted on the base frame of the incinerator Ensure that no ash particles are let out of the exhaust Quality of incineration achieved is excellent A dust proof pre-wired control panel housing all safeties, temperature controllers for primary chamber, secondary chamber, and flue gas temperatures are provided Incorporates contactors, overload relays and MCBs for electrical Alarm hooter is provided along with audio & visual alarms for abnormal working conditions In case of defect in the process, the incinerator comes to a standstill and the fault is indicated on the control panel Suitable protection for burner is provided. Forced draft fan is mounted on the base frame of the incinerator to provide combustion air for incineration of waste Waste charging door and ash removal door is provided on the incinerator The incinerator is refractory lined and does not require any civil works at site. Even the forced draft fan and the incineration chambers need no civil works as these are mounted on a base frame. Applications : For General Waste Like : Paper Timber Refusing textures Leather Rice grass Non-eatable foods Synthetic resin Rubber Tyres Oil socked Cotton / Cloth Waste   For Medical Waste Like : Discarded medicines Cytologic drugs (waste comprising of out dated, contaminated and discarded medicines)   For Animal Waste : Animal tissues Organs Body parts Carcasses Bleeding parts Fluid Blood   For Solid waste : Items contaminated with blood, and body fluids including cotton, dressings, solid plasters casts, lines, bleeding, and other material contaminated with blood For Medical Waste Incinerators : Model Capacity Incinerator Inlet gate Burning Scale Burning Scale Temperature (°C ) Floor Area - Kg/hr Net Height (mm) Cross Height (mm) WxL(mm) m3 m2 1st incinerator 2nd incinerator WxL(mm) MW 40 40-50 1500 2600 750x850 1.79 2.30 800±50 1000±50 1350x3090 MW 60 60-80 1630 2800 900x1000 2.54 3.81 800±50 1000+50 1510x3570 MW 90 90-100 1770 3400 950x1000 3.98 5.11 800+50 1000+50 1990x4390 MW 150 150-160 2000 3750 1100x1000 4.76 7.37 800±50 1000±50 2050x4700 Note : We reserve the right to change any specification without prior notice. For General Waste Incinerators : Model Capacity Kg/hr Incinerator Area over Fire m3 Burning Capacity m2 Cyclone (wxh)mm Stack Floor Area m2 1st Chamber (HxWxL) mm 2nd Chamber (wxh) mm Height on ground (mm) (mm) GW 30 30-40 1010x1905x1430 920x930 0.56 1.26 820x2230 5580 320 4.7 GW 60 50-60 1080x2165x1525 1000x940 0.95 1.62 920x2300 5650 360 5.18 GW 90 80-100 1330x2130x1640 1000x1000 1.08 2.31 1016x2540 5890 390 5.99   We reserve the right to change any specification without prior notice.

Oil filter protects the surface of an engine subjected to extremes where during normal opration lubrication oil forms a thin film on the friction surface so that metal contract is virtually eliminated. The friction surface are protected from wear only by this film of oil. This means that any abrasive particles thicker than the oil film can cause harmful wear & tear to the internal component the engine which can be thus damaged are expensive items such as crank shaft & main bearings. Therefore, clean oil is prime importance of the life of engine.

• Warranty: 1 Year
• Country of Origin: Made in India
• Installation Type: Prefabricated
• Capacity (KLD): 50 KLD
• Application Industry: Automobile Industry
• Inlet Flow Rate(m3/day): 50 m3/day
• Treatment Technology: Mixed Bed Bio Reactor(MBBR)
• Water Source: Industrial Effluent
• Control Module: Available
• Automation Grade: Automatic
• Deliver Type: PAN India
• Treatment Stages: Primary Treatment, Secondary Treatment, Tertiary Treatment
• I Deal In: New Only

thread waste machine, Old Dhotis, Cotton Cloth Waste

elevator truss system, flying speaker system

generator noise control system, generator hire service

Backed with rich industry experience, we are offering Air Filter Element Assembly. Available in different specifications, the Air Filter Element Assembly is inclusive of an element and top & bottom plates.  The Air Filter Element Assembly, offered by us, is designed for every engine that uses a round element air cleaner housing. Our high grade Air Filter Element Assembly facilitates superior air flow improving engine power.

We are offering waste water treatment plants.