Pollution Control Machines Dealers in Mayapuri, Delhi

Power Master” Introduces new concept of Dust Collector with Coolant arrangement, specially designed for use with Surface Grinders. Equipment includes a combo design wherein dust collector used for collecting dust from dry grinding process and Coolant arrangement for wet grinding can be used intermittently as required. A separate suction inlet is also supplied for mounting on surface grinding machine, which buyer can install to connect with flexible pipe to dust collector. Features • Dust Collector with Coolant Combo aesthetically designed in a compact size. • High Filtering Efficiency for fine dusts. • Low noise & power consumption. • Cotton filtering sleeves provid security against file hazard. • Total Security with cotton filtering sleeves (Non-inflammable). • Standard Accessory: Suction inlet for mounting on Surface Grinder. Optional Accessory 1. DOL Starter 2. Dust Guards as per job requirement

• Surface treatment: Polished
• Body Material: SS and Plastic
• Number of wheel: 4
• Capacity: 60 Ltrs. Each Bin
• Dimension: 820x850x490 mm
• Features: Easy collection of segregated waste, Easy removal of bins for cleaning.

All seasoned wood, commercial ply wood, heavy gauge mild steel square pipe (ERW 18 SWG) for frame and supports etc, inside and outside affixed with white Laminate, lower portion with drawers and cup-boards. Fume chamber with 5-6 mm thick Acrylic Sheet (Transparent) Sash with counter-weight balancing technique which enables to adjust the Sash at any level from the work table. Exhaust Flange of 200 mm. dia fitted at the top.

• Application: Industrial Area
• Feature: Low maintenance & High performance
• Warranty: 6 Month
• Shelf Life: Long Lasting
• Conditon: New
• Efficiency: 99.9%

A baghouse (BH, B/H), bag filter (BF) or fabric filter (FF) is an air pollution control device that removes particulates out of air or gas released from commercial processes or combustion for electricity generation.

• Country of Origin: India
• Thickness: 5-10mm
• Length: 5-100mtr
• Feature: Scratch Proof, Perfect Finish, Optimum Performance
• Condition: New
• Brand Name: Tata

• tea bags: tea bags
• quality: best

We are narayan herbal manufacturer of herbal tea bags,ctc tea bags,flavour tea bags,fruit tea bags,green tea bags,slimming tea bags,macha tea bags,jasmine tea bags,stamina tea bags,memory tea bags,antidiabetic tea bags,customised tea bags,tea sticks.

• Port: Delhi
• Packaging Details: Standard Packing
• Packaged: MBR
• Supply Ability: 10 Unit/Units per Month

• Color: Orange
• Voltage: 380V
• Supply Ability: 10 Piece/Pieces per Month
• Pipe Dia: 45mm
• Brand Name: SURIE POLEX
• Model Number: Dust Collector-5HP,3Phase
• Place of Origin: Delhi, India
• Pressure: 300m bar
• Motor: 5HP, 3Phase

We offer Wet or Fume Scrubber in the Indian as well as International market. The Wet or Fume Scrubbers are demanded by varied industries and are used in chemical processing for removal of hazardous fumes. We offer the Wet or Fume Scrubber in varied specifications to cater to the diverse requirements of the clients. The clients can avail the Wet Scrubber or Fume Scrubber from us at the market leading price from us. Available Type of Scrubbers For only fumes straight inlet packed type wet scrubber is used where spraying takes place by re-circulation of the existing water followed by the makeup water. Mist eliminator is used on the top section of the scrubber to avoid carrying over the water in the atmosphereFor fumes with fine dust/powder, ventury type inlet wet scrubber is considered where the fine dust/ powder get mixed due to high velocity and pressure. Spray system is also considered by re circulation of the existing water followed by the makeup water. Mist eliminator is used on the top section of the scrubber to avoid carrying over the water in the atmosphereFor fumes with heavy and huge amount of dust/powder, straight inlet wet scrubber is also considered static water reservoir, where the fumes with dust get in contact with water reservoir and dust particle are settled under the reservoir as slurry and fumes without dust get exhausted via M.S water eliminator

Oil filter protects the surface of an engine subjected to extremes where during normal opration lubrication oil forms a thin film on the friction surface so that metal contract is virtually eliminated. The friction surface are protected from wear only by this film of oil. This means that any abrasive particles thicker than the oil film can cause harmful wear & tear to the internal component the engine which can be thus damaged are expensive items such as crank shaft & main bearings. Therefore, clean oil is prime importance of the life of engine.

Fume Exhaust System, Air Curtains, Latex Gloves, ionizing air gun

Wet Scrubbers are used in chemical process and hazardous fumes. Available type of Scrubbers: For only fumes straight inlet packed type wet scrubber is used where spray take place by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with fine dust/powder, ventury type inlet wet scrubber is considered where the fine dust/ powder get mixed due to high velocity and pressure. Spray system is also considered by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, ventury type inlet wet scrubber is considered where the dust/ powder get mixed due to high velocity and pressure .Spray system is also considered by re circulation of the water from other reservoir since existing water cannot be re-circulated due to slurry formation, while over flow water can be used to the other reservoir for re circulation. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, straight inlet wet scrubber is also considered static water reservoir, where the fumes with dust get in contact with water reservoir and dust particle are settled under the reservoir as slurry and fumes without dust get exhausted via M.S water eliminator.

We are offering waste water treatment plants.

• Blade length: 9, 10, 12
• Total blades: 4, 5, 5

scrap granulators grinders for different applications in plastic waste cutting, designed to cut the waste materials or scrap of plastic sheets etc into thin Granules so that it can be further used in production. The Hikon Granulatorgrinder is built tough and suited to the most demanding applications, The heavy duty fabricated steel rotor and cutting chamber are capable of withstanding high shock loads, Bearings,knifemounts and the rotor have been over engineered and balanced to ensure a long service life, The well thought out design of the machines allows fast,safe access for cleaning and maintenance, Hikon GranulatorGrinder is also provided with dust collector to obtain dust free flakes, Different types of rotor (V-tech, Staggered for particular applications), BLADES MADE UP OF D-2 MATERIAL WHICH ARE PRECISELY TEMPERED TO WITHSTAND HEAVY LOAD.

generator noise control system, generator hire service

• Warranty: 1 Year
• Country of Origin: Made in India
• Installation Type: Prefabricated
• Capacity (KLD): 50 KLD
• Application Industry: Automobile Industry
• Inlet Flow Rate(m3/day): 50 m3/day
• Treatment Technology: Mixed Bed Bio Reactor(MBBR)
• Water Source: Industrial Effluent
• Control Module: Available
• Automation Grade: Automatic
• Deliver Type: PAN India
• Treatment Stages: Primary Treatment, Secondary Treatment, Tertiary Treatment
• I Deal In: New Only

• Weight: 70 kg
• Automation Grade: Automatic
• Material: Mild Steel
• Power Source: Electric
• Frequency: 50 Hz

chemical absorbents, Auto Bearing, Auto Battery, Solvents, Sodium Stearate

thread waste machine, Old Dhotis

centrifugal blower fan, Acoustic Enclosures, Man Coolers, Axial Flow Fans

Organic Food Waste Compost Machine, Biodigester, DRDO Bio Toilet

scrap grinding machinery, extruder machines, High Speed Mixer

Incinerators, process heating products, ventilation products, Shredders

Noise Control System

auto air cleaner, Air Filter, Auto Parts, CNC Machine, Filter

Backed with rich industry experience, we are offering Air Filter Element Assembly. Available in different specifications, the Air Filter Element Assembly is inclusive of an element and top & bottom plates.  The Air Filter Element Assembly, offered by us, is designed for every engine that uses a round element air cleaner housing. Our high grade Air Filter Element Assembly facilitates superior air flow improving engine power.

Incinerator, Thermic Fluid Heaters, Water Heater, Air Heater