Pollution Control Machines Dealers in Pratap Nagar, Delhi

We are engaged in manufacturing and supplying Cyclone Dust Collector in the international market. The Dust Collector Cyclones, we offer, are generally used as dust collector for buffing and polishing machine and Multi cyclone is used as a dust collector for boiler in Thermal Power Plant. The clients can avail the Dust Collector Cyclone from us in varied specifications and at the market leading price. Details Dust Collector Cyclone has an M.S construction. Multi cyclone tubes are of cast iron with vanes. In Multi cyclone number of cyclone tubes is used as per air quantity, one cyclone tube of diameter 250 mm can handle up to 10 M3/min. Specifications Size : 400 to 1600 mmCapacity : 1250 M3/Hr to 30,000 m3/HrStatic Pressure : Approx 90mmwg in each case

Wet Scrubbers are used in chemical process and hazardous fumes. Available type of Scrubbers: For only fumes straight inlet packed type wet scrubber is used where spray take place by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with fine dust/powder, ventury type inlet wet scrubber is considered where the fine dust/ powder get mixed due to high velocity and pressure. Spray system is also considered by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, ventury type inlet wet scrubber is considered where the dust/ powder get mixed due to high velocity and pressure .Spray system is also considered by re circulation of the water from other reservoir since existing water cannot be re-circulated due to slurry formation, while over flow water can be used to the other reservoir for re circulation. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, straight inlet wet scrubber is also considered static water reservoir, where the fumes with dust get in contact with water reservoir and dust particle are settled under the reservoir as slurry and fumes without dust get exhausted via M.S water eliminator.

• Country of Origin: India
• Type: Tables, Dust Collection System
• Material: Wood, Steel, Metal
• Shape: Square, Round, Rectangular
• Thickness: 90-100mm, 80-90mm, 100-200 mm
• Application: Manufacturing units
• Color: Grey
• Feature: High Strength, Good Quality
• Appearance: Modern

"Power Master” Down Draft Tables are the requirement of today for Pollution Control. These Environment Friendly Work Tables are compact stations with Built-in Dust Suction, Filtration & Dust Collection arrangement.   Features * Aesthetically designed, complete with internal wiring & electrical safety * Below permissible noise level with Built-in noise suppressor * High Filtering Efficiency even for fine dusts * Low power consumption * Comfortable working height with built-in light & power output source * Available in attractive colors * Supplied ready to use & easy to maintain Optional Accessory * Suction inlet mounted on adjustable arm * Portable Table: Mounted on wheels * Work station available as per specific job & filtration requirement

• Surface treatment: Polished
• Body Material: SS and Plastic
• Number of wheel: 4
• Capacity: 60 Ltrs. Each Bin
• Dimension: 820x850x490 mm
• Features: Easy collection of segregated waste, Easy removal of bins for cleaning.

• Condition: New
• Efficiency: 99.9%
• Warranty: 1 Year
• Power: 0.75-5.5kw
• Weight: 13400KGS
• AIr Volume: 5000 - 120200m3

The material that is used for the production complies with high quality standards and quality-proved by the experts. Also, we make sure that the raw material is sourced from the trusted places. As we are counted among the reliable names in the industry, we are involved in carrying out a secured payment processing method. We undertake both online and offline methods for the convenience of the clients.

• Type: Wet Scrubber
• Power: 3.7KW - 200KW
• Voltage: 220 V
• Power Source: Electric
• Automation Grade: Automatic
• Material: ABS
• Air Velocity: 8.7m/s
• Frequency: 60 Hz
• Capacity: 5000-40000 CFM
• Fan Speed: 1299 rpm

• Made Of A-1 Kanthal Wire (14 Gauge) For Primary Chamber & (17 Gauge) For Secondary Chamber.: Strong Insulation Is Done With Combination Of Insulating Bricks & Silicon Fiber Insulating Blanket To Avoid Any Heat Loss.
• It Is Portable In Nature, Which Can Easily Placed In A Small Space In A Corner Of Building.: Works On Thermal Destruction Using Controlled Combustion Chamber; Combustion Is Controlled And Provides Enough Heat To Destroy The Waste Into Disposable State.
• Fitted With Hinges & Handle For Proper Sealing To Avoid Heat Loss.: Temperature Of Primary/Burning Chamber Up To 850 Deg. C And For Secondary Chamber 1000 Deg. C.

Portable Incinerator Is Most Effective Bio-Medical Waste Treatment Equipment For Every Small Nursing Home, Blood Bank, Veterinary Hospital, Poultry Farms. The Unit Is Designed For Quick And Safe Disposal. Working Principle: Furnace Type Associated With Burning Refuse. Used Simple Brick -Lined Enclosures.

• Country of Origin: India
• Thickness: 5-10mm
• Length: 5-100mtr
• Feature: Scratch Proof, Perfect Finish, Optimum Performance
• Condition: New
• Brand Name: Tata

These incinerator are classified as controlled air incinerators, where the heat and air for combustion is regulated in such a way as to first volatilize/ gasify the waste in conditions of inadequate air i.e below stoichiometric air condition and then totally destroy it in adequate heat and excess air. In these twin-chambered incinerators volatisation of waste is achieved in the primary hamber with supply for combustion air. The heat source is the high efficiency, automatic ON/OFF fuel oil burner. The volatilized opening to achieve sufficient velocity, where it is subject to stoichiometric conditions. Again the heat source is the auto-control fuel oil burner system. The combustion is carefully regulated for minimum turbulence, thus avoiding emission of pollutants. A specially designed educators system is incorporated at the outlet so that the temperature so the exit gases is brought down from 1200C to 300C before letting them out to the atmosphere, with safe himi for emission, conforming to strict pollution control norms, the mechanism keeps the entire system under negative pressure, hence totally alimenting hazards of ime, temperature and turbulence in these incinerator make them the best technological solution for the destruction of all kinds of waste in today's time Cogeneration In general terms, its system which provides both heat and electricity from the same source of fuel. Such systems often take advantage of what would normally be wasted energy. In a typical power plant, for example, nearly half of the energy consumed is wasted as excess heat. A cogeneration plant would take the excess heat energy and convert it into something which can be used to heat buildings, create domestic hot water or fed into a manufacturing process. Like most other generators, a cogeneration set-up requires a combustion engine of some sort which runs a generator to produce electricity. The difference is that the excess heat is sent through a heat exchanger before being allowed to escape up the smokestack. This second pass at using the combustion energy is what boosts efficiency from 50% or on a typical generator to over 80% at a cogeneration plant. Non Thermal Technologies Biomethenation/ Biogas Plant Biomethenation is process that converts carbonaceous materials, such as coal, petroleum, biofuel, or biomass, into carbon monoxide and hydrogen by reacting the raw material, such as house waste, or compost at high temperatures with controlled amount of oxygen and/or steam. The resulting gas mixture is called Synthesis gas or syngas and is itself a fuel. Gasification is a method for extracting energy form many different types of organic materials. Anaerobic digestion is widely used as a renewable energy source because the process produces a methane and carbon dioxide rich biogas suitable for energy production, helping to replace fossil fuels. The nutrient-rich digestate which is also produced can be used as fertiliser. The digestion process begins with bacterial hydrolysis of the input materials in order to break down insoluble organic polymers such as carbohydrates and make them available for other bacteria. Acidogenic bacteria then convert the sugars and amino acids into carbon dioxide, hydrogen, ammonia, and organic acids. Acetogenic bacteria then convert these resulting organic acids into acetic acid, along with additional ammonia, hydrogen, and carbon dioxide. Finally, methanogens convert these products to methane and carbon dioxide.

Develop Lot of System for air pollution control under guidance of Mr. O. P. karwal like, Scrubber, Multicycle dust collector, Bag FIlter & ESP. We leverage our experience and expertise to apply the appropriate technology to each customer’s air pollution control requirements. Technology is selected targeting the lowest total cost of ownership (balancing initial capital cost with on-going operating cost) while insuring discharge limits are achieved. Our performance guarantee instills confidence that our engineered solution will exceed emission goals.

We are a prominent entity, engaged in manufacturing and supplying a comprehensive assortment of Trima Cyclones, which is fabricated at our well-equipped manufacturing unit with the use of modern machines and sound technology. In order to meet the various requirements of clients, we offer our products in various specifications and dimensions. Clients can avail these products from us at market leading prices.

USES OF SWIMMING POOL  Indoor should be no flammable gas and conductive dust. Forbid to install in an ammonia leak prohibited or danger of explosion hazardous areas Temperature -10 -33 Humidity ≤55% Ozone machine need to use 380V/50HzAC Power PRECAUTIONS: Do not use the product near high-precision electronic equipment, radio wave interference may cause malfunction of precision electronic equipment and other problems. Do not modify or disassemble the product, otherwise it will cause damage and circuit failure of the product. Qualified dedicated grounding wire, secure and reliable grounding line capacity is used to meet the requirements to ensure the elimination of fire hazards.  

• Efficiency: 90-95%
• Construction Material: Mild Steel
• Operation Principle: A Spiral Flow rendering a Strong Centrifugal Force
• Application: Food & Pharmaceutical Industries

We are well known Manufacturers of Incinerators, which is Environmental friendly Fitted with imported burners,

• Type: Ozone Generator
• Power Source: Electrical
• Voltage: 230 V / 50 Hz
• Weight: 2.25 kg
• Warranty: 3 Year
• Power: 65 W
• Brand: German
• Ozone Output: 5000-10000 mg/hour
• Product Dimension: 17.5 x 21 x 20 cm
• Automation: Automatic
• Oxygen Flow Rate: 5000-10000

• Usage: Polypropylene and Polyester materials meet FDA regulations for food contact under CFR21, Section 177.1520
• Diameter (inch): 7.0/17.8,7.0/17.8,4.0/10.2,4.0/10.2
• Filter Medium Material: MEMBRANE MATERIAL ‘PE’ : Polpropylene ‘PO’ : Polyester ‘HT’ : High Temp 5 ; 100 ‘TE’ : TEFLON 10 ; 125 '4': 4” X 14” ‘N’ : Nylon
• Length (inch): 16/40.65,32.0/81.3,8.25/20.9,14.0/35.5

• Micron ratings from 1 to 200 • All industry standard & custom sizes available • Broad chemical compatibility • High flow/low pressure drop • Sewn or fully-welded construction • Handles on all bags • Choice of steel or molded plastic snapseal rings • Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®

JATINDERA BOILER COMPANY is a reliable name, which can be trusted for the manufacturing and exporting of Waste Incinerators. These Waste Incinerators are precisely engineered by experts, which are hugely demanded by clients. It can be used in Hotels, Embassies, Govt. Offices, Banks, Hostels, and in research of animals. Construction : Package type and Incineration is batch type All weather type and mounted on base frame for easy transportation Waste feeding is manual Incinerator has 2 chambers Primary chamber Secondary chamber Both chambers are provided with pressure jet burners for incineration of bio-medical waste For general waste burner is provided only in primary chamber The primary chamber is provided with air pressure nozzles Cyclone separator is provided and mounted on the base frame of the incinerator Ensure that no ash particles are let out of the exhaust Quality of incineration achieved is excellent A dust proof pre-wired control panel housing all safeties, temperature controllers for primary chamber, secondary chamber, and flue gas temperatures are provided Incorporates contactors, overload relays and MCBs for electrical Alarm hooter is provided along with audio & visual alarms for abnormal working conditions In case of defect in the process, the incinerator comes to a standstill and the fault is indicated on the control panel Suitable protection for burner is provided. Forced draft fan is mounted on the base frame of the incinerator to provide combustion air for incineration of waste Waste charging door and ash removal door is provided on the incinerator The incinerator is refractory lined and does not require any civil works at site. Even the forced draft fan and the incineration chambers need no civil works as these are mounted on a base frame. Applications : For General Waste Like : Paper Timber Refusing textures Leather Rice grass Non-eatable foods Synthetic resin Rubber Tyres Oil socked Cotton / Cloth Waste   For Medical Waste Like : Discarded medicines Cytologic drugs (waste comprising of out dated, contaminated and discarded medicines)   For Animal Waste : Animal tissues Organs Body parts Carcasses Bleeding parts Fluid Blood   For Solid waste : Items contaminated with blood, and body fluids including cotton, dressings, solid plasters casts, lines, bleeding, and other material contaminated with blood For Medical Waste Incinerators : Model Capacity Incinerator Inlet gate Burning Scale Burning Scale Temperature (°C ) Floor Area - Kg/hr Net Height (mm) Cross Height (mm) WxL(mm) m3 m2 1st incinerator 2nd incinerator WxL(mm) MW 40 40-50 1500 2600 750x850 1.79 2.30 800±50 1000±50 1350x3090 MW 60 60-80 1630 2800 900x1000 2.54 3.81 800±50 1000+50 1510x3570 MW 90 90-100 1770 3400 950x1000 3.98 5.11 800+50 1000+50 1990x4390 MW 150 150-160 2000 3750 1100x1000 4.76 7.37 800±50 1000±50 2050x4700 Note : We reserve the right to change any specification without prior notice. For General Waste Incinerators : Model Capacity Kg/hr Incinerator Area over Fire m3 Burning Capacity m2 Cyclone (wxh)mm Stack Floor Area m2 1st Chamber (HxWxL) mm 2nd Chamber (wxh) mm Height on ground (mm) (mm) GW 30 30-40 1010x1905x1430 920x930 0.56 1.26 820x2230 5580 320 4.7 GW 60 50-60 1080x2165x1525 1000x940 0.95 1.62 920x2300 5650 360 5.18 GW 90 80-100 1330x2130x1640 1000x1000 1.08 2.31 1016x2540 5890 390 5.99   We reserve the right to change any specification without prior notice.

All seasoned wood, commercial ply wood, heavy gauge mild steel square pipe (ERW 18 SWG) for frame and supports etc, inside and outside affixed with white Laminate, lower portion with drawers and cup-boards. Fume chamber with 5-6 mm thick Acrylic Sheet (Transparent) Sash with counter-weight balancing technique which enables to adjust the Sash at any level from the work table. Exhaust Flange of 200 mm. dia fitted at the top.

generator noise control system, generator hire service

We are offering waste water treatment plants.

waste treatment plant, Raw Material Handling System, Material Handling System

auto air cleaner, Air Filter, Auto Parts, CNC Machine, Filter

Old Dhotis, Cotton Cloth Waste

Fume Exhaust System, Air Curtains, Latex Gloves, ionizing air gun

Wet Scrubber, TSE MBBR - Sewage Treatment Plant, MBR (Membrane Bioreactor)

protection bellow cover, Power Controller, Oil Skimmer, Bellow Cover