Pollution Control Machines Dealers in Raghu Nagar, Delhi

• Type: Scrap Baling Presses
• Application: Card, Carton Boxes, Recylcing Waste Paper
• Weight: 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Black, Brown, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Pneumatic
• Warranty: 1year, 2year

• Made Of A-1 Kanthal Wire (14 Gauge) For Primary Chamber & (17 Gauge) For Secondary Chamber.: Strong Insulation Is Done With Combination Of Insulating Bricks & Silicon Fiber Insulating Blanket To Avoid Any Heat Loss.
• It Is Portable In Nature, Which Can Easily Placed In A Small Space In A Corner Of Building.: Works On Thermal Destruction Using Controlled Combustion Chamber; Combustion Is Controlled And Provides Enough Heat To Destroy The Waste Into Disposable State.
• Fitted With Hinges & Handle For Proper Sealing To Avoid Heat Loss.: Temperature Of Primary/Burning Chamber Up To 850 Deg. C And For Secondary Chamber 1000 Deg. C.

Portable Incinerator Is Most Effective Bio-Medical Waste Treatment Equipment For Every Small Nursing Home, Blood Bank, Veterinary Hospital, Poultry Farms. The Unit Is Designed For Quick And Safe Disposal. Working Principle: Furnace Type Associated With Burning Refuse. Used Simple Brick -Lined Enclosures.

• Condition: New
• Efficiency: 99.9%
• Warranty: 1 Year
• Power: 0.75-5.5kw
• Weight: 13400KGS
• AIr Volume: 5000 - 120200m3

The material that is used for the production complies with high quality standards and quality-proved by the experts. Also, we make sure that the raw material is sourced from the trusted places. As we are counted among the reliable names in the industry, we are involved in carrying out a secured payment processing method. We undertake both online and offline methods for the convenience of the clients.

• Type: Wet Scrubber
• Power: 3.7KW - 200KW
• Voltage: 220 V
• Power Source: Electric
• Automation Grade: Automatic
• Material: ABS
• Air Velocity: 8.7m/s
• Frequency: 60 Hz
• Capacity: 5000-40000 CFM
• Fan Speed: 1299 rpm

• Application: Polypropylene and Polyester materials meet FDA regulations for food contact under CFR21, Section 177.1520
• Diameter (inch): 7.0/17.8,7.0/17.8,4.0/10.2,4.0/10.2
• Filter Medium Material: MEMBRANE MATERIAL ‘PE’ : Polpropylene ‘PO’ : Polyester ‘HT’ : High Temp 5 ; 100 ‘TE’ : TEFLON 10 ; 125 '4': 4” X 14” ‘N’ : Nylon
• Length (inch): 16/40.65,32.0/81.3,8.25/20.9,14.0/35.5

• Micron ratings from 1 to 200 • All industry standard & custom sizes available • Broad chemical compatibility • High flow/low pressure drop • Sewn or fully-welded construction • Handles on all bags • Choice of steel or molded plastic snapseal rings • Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®

PECMA vertical packed bed scrubbers are equipped with a very efficient contact zone, a gas distribution section, a liquid distribution system and a mist eliminator. The specially designed gas distribution section ensures even distribution of gases over the entire cross-section of the tower. The highly efficient liquid distribution system combined with an even gas flow ensures a very intimate gas-liquid contact. The mist eliminator section effectively removes the carry over of liquid droplets from the contact zone. Packed Bed Scrubbers offer very high collection efficiencies at comparatively lower pressure drops. The effluent liquid can be recycled in this process. Packed Bed Scrubbers are used to remove corrosive fumes and toxic gases like sulphur dioxide , chlorine hydrochloric, hydrofluoric ,hydrogen sulphide, phosphatic acid , cyanides ammonia and other organic and inorganic gases etc. Outlet Emissions are Even Less Then 1 Ppm. Can Be Achieved. Desulphurization This system uses the principal of gas and solid chemisorption technique for the removal of toxic gases like hydrofluoric acid, So2 etc. The system usually consists of gas-solid reactor followed by a fabric filter for collecting reaction products. This system is specially suitable for removal of particulate and gaseous fluorides from pot gases in an aluminum smelter and also for cleaning exhaust gases from refuse/chemical incinerators. Industrial Ventilation and Clean room systems equipments mainly Air shower, Air washer, Centrifugal fans.

JATINDERA BOILER COMPANY is a reliable name, which can be trusted for the manufacturing and exporting of Waste Incinerators. These Waste Incinerators are precisely engineered by experts, which are hugely demanded by clients. It can be used in Hotels, Embassies, Govt. Offices, Banks, Hostels, and in research of animals. Construction : Package type and Incineration is batch type All weather type and mounted on base frame for easy transportation Waste feeding is manual Incinerator has 2 chambers Primary chamber Secondary chamber Both chambers are provided with pressure jet burners for incineration of bio-medical waste For general waste burner is provided only in primary chamber The primary chamber is provided with air pressure nozzles Cyclone separator is provided and mounted on the base frame of the incinerator Ensure that no ash particles are let out of the exhaust Quality of incineration achieved is excellent A dust proof pre-wired control panel housing all safeties, temperature controllers for primary chamber, secondary chamber, and flue gas temperatures are provided Incorporates contactors, overload relays and MCBs for electrical Alarm hooter is provided along with audio & visual alarms for abnormal working conditions In case of defect in the process, the incinerator comes to a standstill and the fault is indicated on the control panel Suitable protection for burner is provided. Forced draft fan is mounted on the base frame of the incinerator to provide combustion air for incineration of waste Waste charging door and ash removal door is provided on the incinerator The incinerator is refractory lined and does not require any civil works at site. Even the forced draft fan and the incineration chambers need no civil works as these are mounted on a base frame. Applications : For General Waste Like : Paper Timber Refusing textures Leather Rice grass Non-eatable foods Synthetic resin Rubber Tyres Oil socked Cotton / Cloth Waste   For Medical Waste Like : Discarded medicines Cytologic drugs (waste comprising of out dated, contaminated and discarded medicines)   For Animal Waste : Animal tissues Organs Body parts Carcasses Bleeding parts Fluid Blood   For Solid waste : Items contaminated with blood, and body fluids including cotton, dressings, solid plasters casts, lines, bleeding, and other material contaminated with blood For Medical Waste Incinerators : Model Capacity Incinerator Inlet gate Burning Scale Burning Scale Temperature (°C ) Floor Area - Kg/hr Net Height (mm) Cross Height (mm) WxL(mm) m3 m2 1st incinerator 2nd incinerator WxL(mm) MW 40 40-50 1500 2600 750x850 1.79 2.30 800±50 1000±50 1350x3090 MW 60 60-80 1630 2800 900x1000 2.54 3.81 800±50 1000+50 1510x3570 MW 90 90-100 1770 3400 950x1000 3.98 5.11 800+50 1000+50 1990x4390 MW 150 150-160 2000 3750 1100x1000 4.76 7.37 800±50 1000±50 2050x4700 Note : We reserve the right to change any specification without prior notice. For General Waste Incinerators : Model Capacity Kg/hr Incinerator Area over Fire m3 Burning Capacity m2 Cyclone (wxh)mm Stack Floor Area m2 1st Chamber (HxWxL) mm 2nd Chamber (wxh) mm Height on ground (mm) (mm) GW 30 30-40 1010x1905x1430 920x930 0.56 1.26 820x2230 5580 320 4.7 GW 60 50-60 1080x2165x1525 1000x940 0.95 1.62 920x2300 5650 360 5.18 GW 90 80-100 1330x2130x1640 1000x1000 1.08 2.31 1016x2540 5890 390 5.99   We reserve the right to change any specification without prior notice.

• Application: Industrial
• We Provide: Consultation
• Efficiency (%): 98%
• Material: Mild Steel
• Airflow (m3/h or CFM): 80000 m3/h

Wet Scrubbers are used in chemical process and hazardous fumes. Available type of Scrubbers: For only fumes straight inlet packed type wet scrubber is used where spray take place by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with fine dust/powder, ventury type inlet wet scrubber is considered where the fine dust/ powder get mixed due to high velocity and pressure. Spray system is also considered by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, ventury type inlet wet scrubber is considered where the dust/ powder get mixed due to high velocity and pressure .Spray system is also considered by re circulation of the water from other reservoir since existing water cannot be re-circulated due to slurry formation, while over flow water can be used to the other reservoir for re circulation. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, straight inlet wet scrubber is also considered static water reservoir, where the fumes with dust get in contact with water reservoir and dust particle are settled under the reservoir as slurry and fumes without dust get exhausted via M.S water eliminator.

• Type: Ozone Generator
• Power Source: Electrical
• Voltage: 230 V / 50 Hz
• Weight: 2.25 kg
• Warranty: 3 Year
• Power: 65 W
• Brand: German
• Ozone Output: 5000-10000 mg/hour
• Product Dimension: 17.5 x 21 x 20 cm
• Automation: Automatic
• Oxygen Flow Rate: 5000-10000

Develop Lot of System for air pollution control under guidance of Mr. O. P. karwal like, Scrubber, Multicycle dust collector, Bag FIlter & ESP. We leverage our experience and expertise to apply the appropriate technology to each customer’s air pollution control requirements. Technology is selected targeting the lowest total cost of ownership (balancing initial capital cost with on-going operating cost) while insuring discharge limits are achieved. Our performance guarantee instills confidence that our engineered solution will exceed emission goals.

• Material: Metal
• Features: Reliable performance , Tough in construction ,Durable , Easy to maintain ,Consume low power

We offer fume exhauster. Description saviour kb-20 is a portable blower cum exhauster for either removing smoke ,welding fumes etc or pumping in fresh air having light weight yet tough pu housing capable to deliver 800cfm of air. It comes with a collapsible hose of 30 feet enclosed in a box.the hose is made out of reinforced polyester with pv coating and ss ribs to make it fully non corrosive and tough . The hose diameter is 8". Quality process certifications : factory test certificate

waste treatment plant, Raw Material Handling System, Material Handling System

Wet Scrubber, TSE MBBR - Sewage Treatment Plant, MBR (Membrane Bioreactor)

waste incinerators

Fume Extractor, Stainless Steel Cross Over Bench, Laboratory Spot Extractor

Air Compressor Parts, Air Compressor, Vacuum Sizing Tank

Waste Water Treatment Plant, Package Water Treatment Plant

Ozone Generator

centrifugal blower fan, Visi Cooler, Stainless Steel Water Cooler

Oil Filter, Air Filter, Fuel Filter

Portable Ozonator, RO Plant With Chilling plant, distilled water plant

dust scrubber, cherry picker, motor graders renting services

Bag Filter, low vacuum dehydration system, Spare Impeller, Roof Extractor

Bag Filter, Material Handling Equipment, Pollution Control Equipment

Tractors Air Cleaner Assembly, Headlamp Assembly, bumper light