Power Saws Dealers in New Rohtak Road, Delhi (32 products available)

We, being a quality centric company, offer product range that is strictly as per the globally accepted norms. With the assistance of sophisticated packaging system and skilled personnel, we are able to provide damage-free products to the clients as we ensure complete safety during packaging.   Features Hard & sharp Sizes available Cost effective & durable

BRIEF SPECIFICATIONS     THE BED is of heavy dimension provided with guide way for the vice of clamp the work pice. One jaw of the vice is fixed while the other is adjusted according to the material diameter.     SAW FRAME   is of rigid construction and runs in prismatic guide insuring a squareand parallel cut. The cut takes place on draw stroke, and the blade is hydraulically lifted out of contact with forward stroke to prevent wear of the blade, and can cut all types of metal which are machinable of all strength.     FEED Two levers are provided at the dash-pot. The small lever regulates the rate of feed, while the other big one enables the slide to start cutting or to be raised the slide automatically, on completion of the cutting cycle and the motor switched off automatically.     SPEED A two speed drive mechanism are incorporated for the selection of the most suitable speed for the material being cut. Cooling the machine comes with a very reailable and efficient centrifugal pump, for quick cooling the Blade. It comes with connection pipes from water tank to stay put on the work pice. The pump is driven by a intermediate drive.     STANDARD All machines are supplied with centrifugal water pump.     ACCESSORIES Motor-pully, Motor-plate, but without ‘V’ belts Electricals.     EXTRA ACCESSORIES Angular vice simple, Angular vice with Graduation, Electric-motor and Starter, ‘V’ belts, Blade. A direct on line push-button, Starter can be incorporated which sets into motor an adjustable trip mechanism which stops the machine as soon as the blade is clear from work. The non-productive time is reduced to minimum.

• Applications: Floor sawing, Pile cutting,Bridge work

The engine of the asphalt & concrete floor saw is driven by diesel, petrol or kerosene. It has a diamond wheel of diameter 300 mm, which is suitable for cutting upto depth of 110 mm and is supplied with standard outfit. The engine is attached to a trolley, which has a water tank that supplies water to the cutting blade to keep it cool during cutting operation.

We are a primary Supplier of high quality Pruning Saw which is widely used for carrying out various gardening operations. Pruning Saw is generally used for cutting branches of a tree. The Pruning Saw offered by us comes with a wooden handle and is highly appreciated by many clients for its durability, sharp edges, exclusive finish, good grip and available at reasonable prices.

• Features: Different diameters, Rust proof, Easy to install

• Cutting Depth: Cutting depth in wood : 65 mm, aluminium : 12 mm, non-alloyed steel : 3 mm
• Features: Best in quality, Handy, Noise less, Plastic body, Steel finished top, Faster in operations.
• Rated power input: 400 W
• No-load stroke rate: 500 - 3100 spm
• Weight without cable: 1.7 kg
• Cable length: 2.5 m
• Stroke height: 18 mm

• Size: 10-13inch, 13-15inch
• Type: Chainsaw
• Weight: 1-2kg
• Displacement: 30.1 Cc
• Power Output: 1.3 Kw/1.8 Hp
• Weight: 3. 9 Kg
• Guide Bar: 16inch

We offer an innovative range of STIHL Chainsaw to our clients that combines advance technology with high power. STIHL Chainsaw that we offer has advanced design and is lightweight. Our range of Chainsaw is sourced from trusted vendors and is available in a variety of equipment versions. Our STIHL Chainsaw is also supplied in power ratings from 1. 3 kw to 6. 4 kw (1. 6 hp to 8. 7 hp). Furthermore, our range of Chainsaw STIHL is widely used in orchards, parks, gardens or on building sites. We are a prominent Supplier of STIHL Chainsaw.

Sawing of marble, granite and other pieces of rocks is carried out in gangsaws with diamond segmented blades. In a single set-up 100 Saw Blades can be fitted. STELCO Gangsaw steel meets the demands made by Saw Blades manufacturer and consumer on the quality of the blade material.Some of the characteristic properties of the STELCO Gangsaw Steel are:High fatigue resistance is an important property, since stone Saw Blades are frequently exposed to high and varying loads as well as to vibrations. i.e. high fatigue stresses. High transition temperature results in less risk of undesirable martensite formation during the brazing of the diamond segments. A chemical composition which minimizes the risk of cracks in connection with brazing. Good flatness and straightness.Square, Smooth edges is a prerequisite for strong and durable joints between the parent blades & segments.

• Max. cutting depth: 200 mm
• Max. saw blade: 600 mm
• Cutting length: 600 mm
• Saw blade speed: 24oo rpm
• Benefits: Maximum stability and load ability due to strong steel chassis,Continuous tool cooling and minimal amount of service work due to water pump location that prevents soiling,Problem-free, safe transport,Quick and easy,blade installation using intelligent bla
• Fields of applications: Processing of base plates, soft and hard stone, bricks, and diverse construction materials,Operation in the construction, garden and landscaping industry

• Brand Name: Bosch
• No Load Speed: 3800 rpm
• Weight: 18.1 kg
• Model Name/Number: GCO 14-24J
• Cutting Capacity Square: 119 x 119 mm
• Cutting Capacity at L Profile: 130 x 130 mm
• Rated Input Power: 2400 W
• Cutting Disc Diameter: 355 mm
• Cutting Disc Bore: 25.4 mm

Driven by Diesel or Petrol / Kerosene Engine, Diamond wheel of 300mm dia., suitable for a cut of depth unto 110 mm is supplied with standard outfit. The trolley on which the engine is fitted also has a water rank which supplies a stream of water to keep the cutting blade cool during the operation. Adjustment to control depth of cut is also provided. A safety Guard is provided over the diamond wheel. Diamond wheels up to 600 mm dia., can be supplied at extra cost.

• Capacity: 2 Seater
• Type: 2 Seater
• Location Type: Outdoor
• Material: Plastic
• Color: Yellow And Black
• Size: 305x100 (cm)

Description We are leading exporters of high quality Hacksaw Frame Square With Plastic Handle. These are widely used for various cutting applications. FEATURES-: Sturdiness Corrosion resistance

• Brand Name: Rishab Sales Corp
• Application: Industrial, Garage/Workshop
• Blade type: Circular High Speed
• Base Material: Stainless Steel
• Tooth type: Milled
• Surface: Galvanized

Broach Cutters, HSS Punches, Carbide Punches, roller forming machines

We are offering Hacksaw Blades. we are manufacturer & exporter of different type of hacksaw blades.

• Motor Speed: 13000 rpm
• use: industrial

product detail     available in bedsize: 3 x 2 suitable for cutting all kinds of mdf, plywood board, shaving boards, pvc panels, wood-based panels, abs  panels, organic glass plates, other wood structure and similar hardness panels the guide way is imported chromium steel balls structure, precise and durable the movable table is made of high-strength extruded aluminum alloy, strong and won’t bend the movable table surface is oxidation treatment, beautiful and hard wearing packing of 1 pcs +gst 18%    .

We offered V-Cutting saw are highly in demand for their unmatched quality. Made available in different specifications, these efficient and high functionality machines are massively known for their reliable performance.

Router Bits, Measurement Instruments, Industrial Abrasives, socket sets

manual cutting saw, CNC Lathe Machine, Cnc Vertical Turning Lathe

Blades, Adhesives, sharpening stones, Leather Punches, leather hammers

Blades, Industrial Tools, carpenters tools, Handtools, Screw Drivers

Blades, Nut Drivers, nut fasteners, Screw Drivers, Spanners, Tool Holders

Chain Saw, Hedge Trimmer, Cutting Tools, Broaches, Cutters

electric bone saw, Heavy Handle Plaster Saw, Cervical Squre Cage