Preet Machinery Co. Ajmeri Gate, Delhi

We are listed at the apex in the list of the most dependable Steel Cord Conveyor Belt Suppliers in India. The materials used in the manufacturing of the HighTension Steel Cord Conveyor Belt are of optimum quality that ensures appropriate result in areas that require transportation of heavy loads over a long or short distance. The FireResistant Steel Cord Conveyor Belt is available in width up to 2400mm. Some of the notable features of the Steel Cord Conveyor Belts are as listed below: High tensile strength. Small diameter of drive pulley. Small elongation in use. High adhesion between rubber and steel cord. Good trough ability. Even tension of steel cords. Inspection of the belt X-rays. Width: Up to 2400mm Characteristics: High tensile strength: The belts are suitable for large span, long distance transportation Of materials Small elongation in use: The belts need only a very short take-up stroke distance. Small diameter of drive pulley: The belt body has a layer of longitudinally arranged Steel cords as its skeleton, and thus is resistant to flex fatigue. Therefore, drive pulley Of smaller diameter can be used to make the equipment smaller. High adhesion between rubber and steel cord: The cords are coated with zinc on there Surface, and also the rubber used have the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and Difficult to drop, so the rubber belts are long in life. Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel Cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run awry. Good trough ability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping. Inspection of the belt X-rays: Users can use X-rays to inspect damages of the skeleton Steel cords on the conveyor machines to prevent accidents from happening.

We are recognized as the most reliable Conveyor Belts Manufacturer in India. The Materials used in the manufacturing of the Rubber Conveyor Belts are of optimum quality that ensures noteworthy features like high durability, resistivity to adverse conditions and high tensile property. Further to meet the varied requisites of the clients, the Industrial Rubber Conveyor Belts are available in different grades like Grade M-24, Grade N-17, Grade HR (T1), Grade SHR(T2), Grade UHR, Grade FR and Grade OR and are manufactured using the fabrics mentioned below: Nylon/Nylon (NN) Carcass. Cotton/ Cotton (CC) Carcass. Polyestor/Nylon (EP) Carcass. Cotton/ Nylon (CN) Carcass. Width: Up to 2400 mm. Length: Open or endless up to 400 meters in single length provided the diameter does not exceed 10 feet. Plies: 1 plies to 8 plies. Type of Fabrics & their Features: Nylon/Nylon (NN) Carcass: NN 100, NN 125, NN 150, NN 200, NN 250, NN 300, NN 350, NN 400 and NN 450. Lower longitudinal elongation. Higher tensile strength. Good flexibility and trough ability. Good resistance to mildew, moisture and rotting. Good resistance to edge wear. Excellent impact resistance. Unaffected by alkalis and weak acids. Suitable for conveying material over long distances. Polyestor/Nylon (EP) Carcass: 100, EP 125, EP 150, EP 200, EP 250, EP 300, EP 350, EP 400 and EP 450 Besides having the advantages as listed for NN carcass belts, EP belts have the additional advantage of lower longitudinal elongation. Cotton/ Cotton (CC) Carcass: 28 OZ, 32 OZ, 36 OZ, 42 OZ, 48 OZ and 34 OZ. Suitable for most applications. Good bonding for rubber. Good fastener holding properties. Cotton/ Nylon (CN) Carcass: Good troughability. Resistance to longitudinal tearing and damage due to edge turn up. Improved resistance to impact damage. Lighter in weight. Better mechanical fastener holding properties. Grades: Grade M-24: Compounded from premium quality natural rubber to provide excellent resistance to cutting gouging, wear & tear and confirms to the maximum abrasion loss value & minimum tensile strength. Grade N-17: Recommended for medium duty services to handle sized materials like woodchips, lime, fine stones, gravel's etc. Grade HR(T1): Manufactured with specially formulated rubber compound for handling materials like ash, hot lime, foundry sand etc. having temperature up to 125°C for coarse and 100°C for fines. Grade SHR(T2): This cover grade is specially formulated with synthetic & natural rubber to provide superior heat & abrasion resistance. Recommended for temperature up to 180°C for coarse and 160°C for fines material. Grade UHR: Specially made with formulation of S.B.R rubber for providing ultra heat & abrasion resistance. Recommended for temperature up to 180°C for coarse and 160°C for fines material. Grade FR: This belt is widely used in coal & such type of mines where the ambient temperature may not be high but there is distinct hazard of belts being enveloped in fire. Grade OR: specially compounded synthetic rubber cover grade is specially designed to give the best possible resistance to mineral, vegetable and animal oils. Hygienic: This grade is specially manufactured from suitable non-toxic elastomers & is odorless. Recommended for handling foodstuff like tea, bakery, medicines, confectionery etc. Rough Top Belt: It is designed for transporting light weight goods, either being inclined or being horizontal, also suitable for transporting fragile or deformed materials and packed goods, such as glass, papers, bags, boxes or cartons at angle from 15 to 35 degree. The bareback Rough Top belt makes less friction coefficient, suitable for running over table and flat panel. The design of mesh-like pattern on the top surface cover can generate the relief effect, absorbing any vibrations and impacts exerted on the materials conveyed and simultaneously preventing the material from slip. Type of Edges: Available in cut edges and moulded (protected) edges. Skim Coated: The belts are processed with all its fabric plies skim coated with superior quality rubber compounds Mildew Inhibition: The rubber compounds used in the belts are designed such as to have full protection against mildew Breaker Ply: To with stand extra impact during service the belts are provided with breaker ply on demand. Belt Designation: Available in three types i.e. General Duty (GD), Heavy Duty (HD) and Extra Heavy Duty (EHD). National and International Standards followed: Bureau of Indian Standards (BIS) British Standards (BS) International Organization for Standardization (ISO) German Standards (DIN) Canadian Standards (CAN / CSA) Australian Standards (ASS) France Standards (NF-T47-100/101) Special features of IBC Conveyor Belts: Unique Carcass Design & Assembly. Superior Adhesion Levels. Higher Longitudinal Flexibility. Improved Transverse Flexibility. Higher Tensile Strength. Low Belt Stretch. Outstanding Impact Resistance. Improved resistance to mechanical damages. Higher carrying capacity with low conveyor belt weight. Rot Resistance. Hot & cold splice proven. Superior joint efficiency & increased life. Universal applications.

We are renowned as one of the most preeminent PVC Conveyor Belts Suppliers in India. Various national as well as international clients are placing huge and repeated orders for the PVC Conveyor Belts due to the noteworthy features like durability, resistivity to abrasion and tensile strength. The Plastic Conveyor Belts are made up of specially developed fabrics, with covers made of PVC, PU, PE, polyester or silicone rubber that make the belts ideal for various Conveyors, whether horizontal, roller supported, troughed, inclined, with suction, curved, etc. customers are also eased with the availability of the PVC Conveyor Belts as per the specifications provided. The vast range of IBC products offer a choice of belts with many features including: Anti-static and non-conductive. Food quality types to FDA and HACCP standards. Resistance to abrasion, oils, fats and chemicals Surfaces with low, medium or high coefficient of friction. High transverse rigidity and dimensional stability. Low noise (LdB belts) Special belts can also be manufactured complete with: Guides, profiles and sidewalls fitted by means of high frequency or hot air welding machines. Curved or Corner conveyor belts it allows the solving of logistic problems through the deviation of the conveying system from a few degrees to a 180° turn. Belts can be supplied endless spliced or with prepared ends for on-site splicing to be done with dedicated solutions. The major application sectors for these belts are listed below: Airports, Parcel handling, Postal automation, Commercial distribution, Sports equipment, Packaging and wrapping, Bakers and oven products, Chocolate and sweets sectors, Milling and grinding, Bottling plant, Fruit and vegetables, vineyards, Meat processing, Paper, cardboard and printing, Woodworking and furniture, Marble and granite, Brick, ceramics and glass.

We are reputed as the most distinguished Conveyor Belt Accessories Manufacturer in India. The array of the accessories offered by us includes Conveyor Belt Pulleys, Conveyor Belt Rollers and Idlers that are made up of excellent quality materials that further ensures noticeable features like high durability, resistivity to rust and high tensile property. The Conveyor Belt Accessories are designed using the latest technologies that further results in enhanced performance of the Conveyors. Additionally, customers are eased with the availability of the Conveyor Belt Accessories in varied sizes and dimensions to meet the specifications provided. Design and Construction: Smooth Pulley surfaces provide maximum belt protection. Pulleys are available with straight or crowned face. Drive pulley lagging is usually provided to increase traction between belt and pulley. Each Product is designed according to its position in conveyor, considering all tension parameters. Welded steel pulleys are of drum type, with rim, end disc and hubs designed to give maximum rim overhang, prevents accumulation of material. Sailent Features: Stable running, good quality, free maintenance. Belt conveyor rollers are silent running. Suitable for fast speeds. High accurate steel pipes ensure the rollers with low vibration and noise.