Process Pumps Dealers in Jhandewalan Extension, Delhi

Dewatering Pumps SDR Series SUBMERSIBLE pumps are used for dewatering Applications. They are portable and fitted with electric motors and double MECHANICAL SEAL. They are Ideal for pumping liquids with fine solids, sand or such other liquids. Standard materials of construction are S.S.304 for the impellerS.S.410 for the shaft. Capacity Up To 216 Mhr Head : Up To 40 Mtr

Diaphragm Design Allows Dry Running. Quiet Operation. Large Surge Chamber for Even Water Flow. Permanently Lubricated Ball Bearings on Shaft and Connecting Rod. Large Vibration Absorbing Pads.Corrosion Resistant Materials Throughout for Sea Water Service.Listed as NMMA accepted.

• Voltage: 220 V
• Pressure: Up to 16 Bar
• Material: MS,SS
• Finishing: Paint Coated
• Speed: 3500 RPM
• Phase: Three Phase
• Max Capacity: Upto 400 m3/hr

• Pressure: Upto 25Bar and more
• MOC: PP-PV-PVDF-PP-SS
• Flow: Min 5 ml

DDA – SMART Digital Series Pumps (0.0007 to 8 gph) The DDA SMART Digital dosing series represents the latest generation in Digital Dosing pumps from Grundfos. Its impressive intelligence and decision making capabilities go beyond any existing metering pump technology in the market. The DDA can not only inject chemicals and verify injection; it can also measure valuable data such as flow or pressure. The pump can then diagnose the operation status based on the relationship between the diaphragm displacement and the pressure inside the head. The pump is so smart it can tell you if there are air bubbles inside the head. This technology goes even further. Thanks to its impressive logic capabilities, the DDA can make decisions to display and/orcorrect failures such as overpressure, valve leaks or air bubbles Smooth and Continuous DosingEnsures an optimum mixing ratio at the injection point without the need for additional accessories, such as static mixers. It also provides significant reduction of pressure peaks, preventing mechanical stress on wearing parts such as diaphragm, tubing, and connections, resulting in less maintenance required. Full Stroke Length at All TimesThe pump always operates at full stroke length, irrespective of the capacity set; this ensures maximum volume displacement per stroke, optimum accuracy, easy priming and improved suction. Up to 3000:1 Turndown RatioThe Digital Dosing range is designed to give you superior flexibility and accuracy even when dosing very small volumes. Maximum Capacity SettingWith the DDA series you decide what the maximum capacity should be. You can select any value within the performance range of each model and the pump will redefine the injection speed and adjust the operation scale within that range. So you only need a few models to cover multiple applications. Anti-Cavitation / SlowModeThe variable speed of DDA pumps facilitates a unique anti-cavitation function for high viscosity liquids. This function provides slower suction speed (50 or 25% of the maximum speed), ensuring optimal priming and pumping of even the most difficult liquids. Flow MonitoringThe DDA FCM pump can precisely measure and display the actual dosing flow. Via the analog 0/4- 20 mA output, the actual flow signal can easily be integrated in any process control system, without needing additional measurement equipment. Pressure MonitoringThe integrated pressure sensor measures the actual pressure of the system, which is shown in the display. In case of an overpressure situation, the pump will stop injecting, generate an alarm on the display, and trigger a relay. The pressure can also be monitored via the 4-20mA signal output. AutoFlowAdaptThe DDA FCM pump can recognize pressure fluctuations on the discharge line and adapt the speed to compensate the injection, maintaining a constant feeding set point.

• Max Flow Rate: 1
• Model Name/Number: 50880 Bilge Pump
• Body Material: Plastic
• Voltage: 240v
• I Deal In: New only

• Certification: ISO 9001:2008
• Voltage: 220V
• Condition: New
• Application: Cooler Use
• Theory: Axial Flow Pump, Centrifugal Pump, Electromagnetic Pump, Reciprocating Pump, Rotary Pump
• Automatic Grade: Automatic
• Driven Type: Electric
• Pressure: High Pressure, Medium Pressure
• Structure: Diaphragm Pump, Gear Pump, Multistage Pump, Single Stage Pump
• Warranty: 1yr

• 220-240V/50HZ: 220-240V/50HZ
• Power (W): 60
• 80: Current (A)
• 0.3: 0.4
• Current (A): 0.3
• 0.4: Motor Speed (rpm)
• 1450: 1450
• Ultimate Vacuum (mbar): 150
• 150: 1000mbar
• 17 L/min: 19 L/min
• 880mbar: 14 L/min
• 18 L/min: 750mbar
• 12 L/min: 16 L/min
• 600mbar: 9.5 L/min
• 14 L/min: 480mbar
• 7 L/min: 14 L/min
• 350mbar: 4.5 L/min
• 9 L/min: 210mbar
• 1.5 L/min: 6 L/min
• Outlet (mm): 8
• 8: Weight (kg)
• 4.1: 4.1
• Noise Level (dB): 50
• 50: Cat. No.
• 167300-22: 167410-22

• Voltage: 220 V
• Brand: Seema Gift
• Power Source: Electric
• Material: Plastic

• Type: Automatic
• Certification: CE Certified
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Pressure: 40-80Bar
• Warranty: 1 Year

We are the main supplier of this product.

• Country of Origin: Made in India
• Voltage: 180-240 V
• Features: Special design for cooler system, Sheets,which have long life made us high quality strong AES
• Usage/Application: Cooler
• Power Source: Electric
• Type Of Parts: Motor
• Color: Black,Orange
• Material: Plastic
• Power Consumption W: 20 W
• Frequency: 50 Hz
• Guarantee: Upto 31 December
• Other Detail: Do Not Operate Without Water
• Other Name: Submersible Fountain Pump

These Vacuum pumps are designed to work non-stop without any problem, for a long period of time in well equiped laboratory environment. These are Direct Drive, Double Stage, Oil Sealed, Rotary High Vacuum Pumps wherein, State of the Art technique has been adopted to ensure proper alignment and the fine setting of each & every component used, remain ever undisturbed.

cooler pumps, 3 Core Submersible Cable, exhaust fan motor, Cooler Fan Blades

Submersible cooler pump, oil heaters, Kitchen Chimneys, popup toaster

Coolant Pumps, Bench Grinders, AC Electric Motors, Exhaust Fan

Cooler Pump, convector motor, exhaust fan parts, Motor, Motor Fan, air fan